DTR's Shop‎ > ‎Diodes‎ > ‎

S06J 12X 405 Diodes

S06J 12X 405 Diodes

The S06J is a 5.6mm 405nm laser diode with a max suggested current of 450mA. @ 450mA they will average about 500mW with a three element lens or 700mW with a G-2.:)





12X S06J 405nm Diode
$25


Free US shipping on order over $50 or Express USPS $20. 
First Class International $14 "Not Tracked"(Offered On Orders Under $350 Orders Over will Default to DHL Express Tracked $55-$80)
Or
Express DHL 5-7 Day 
$55-$80
Check out can not calculate based on your address. You will be charged $80 when selecting Express which is the max and I will refund difference if there is any. Usually only remote deliver is the full $80 most destinations are around $60 and Mexico and Canada are about $50.
Shipping to Russia is via USPS Express Only for $65


Back Half and Lens Options

AL:Aluminum CU:Solid Copper Back Half HLCU:Half Lens Solid Copper CUDS:Solid Copper With Driver Shelf
NL: No Lens 2EG: Two Element Glass Lens 3EG:Three Element Glass Lens G2: G-2 Glass Lens
All copper back half options make direct thermal contact with the base of 9mm diodes or the base of the copper diode mount on modules for 3.8mm/5.6mm diodes
Aluminum back halfs have for a free floating compact driver to be installed by connected directly to the pins where no additional driver heasinking is required
The 20mm and 25mm Copper with Driver Shelf options have a pocked machined to thermally bond a compact driver in the back of the module for higher current builds
All the drivers I carry except the Blackbuck 8M will work as a compact driver for the above configurations

S06J 405nm Laser Diode 
In 12mm Copper Module W/Leads 
No Laser Driver
$40 

S06J 405nm Laser Diode 
In 20mm Copper Module W/Leads 
No Laser Driver 
$45 
S06J 405nm Laser Diode 
In 12mm Copper Module W/Driver
2.5V-6V 2A+ Input 
$70


S06J 405nm Laser Diode 
In 20mm Copper Module W/Driver
2.5V-6V 2A+ Input 
$75

Comments