Send Error Codes

1101   The server name of the SMTP server name is not set correctly or the host name is
       incorrect when sending scan data to FTP. Use Command Center and register SMTP
       server name and host name correctly.
1102   The Login user name is incorrect or the domain name has not been entered. Enter Login
       user name, domain name, and password correctly.
1103   The network path name is incorrect or you do not have access to the folder specified.
       Use Command center and register the path name correctly.
1104   No recipient address. Enter E-mail address correctly.
1105   E-mail – The SMTP protocol setting is turned off. Use Command center and turn on
       SMTP protocol setting. Scan to PC (SMB) – SMB setting is turned off. Use Command
       center and turn on SMB setting. Scan to PC (FTP) – FTP setting is turned off. Use
       Command center and turn on FTP setting.
1106   The sender address under E-mail : SMTP is not registered. Use Command center and
       register the sender address.
2101, 2102, 2201, 2202, 2203, 3101
       The network cable is disconnected or the hub that it is connected to is not operating
       properly. Check the cable and the hub. Otherwise, the server name or the host name of
       the SMTP server is not set correctly. Use Command center and register the SMTP server
       name and host name correctly.
2204   The E-mail size exceeds the acceptable send data capacity. Decrease the size or
       resolution of the scanned data to be transmitted and resend E-mail.
9181   The scanned original exceeds the acceptable number of pages of 999. Send the excess
       pages separately.

Comments