m/s. BALAJI COTTON LINTER

IMPORTERS & EXPORTERS AND DISTRIBUTORS:

"COTTON LINTERS","COTTON SEEDS",& "RAW COTTON","COTTON LINTER PULP","COTTON  SEEDS CAKES", "COTTON SEEDS CAKES MEALS","COTON SEEDS OILS MEALS".

P.O.Box # 2040, Fatehganj H.O.

BARODA # 390002, GUJARAT, INDIA

balajiplatinum@gmail.com

cottonlinter@gmail.com

 


Importers & Exporters And, Distributors:

"Cotton Linters", "Cotton Seeds",  & "Raw Cotton"  Indian Varieties,

 

We Can Supply :  

(1) "Raw Cotton", Indian Varieties S-6 and V-797, &

(2) "Cotton Linters", 1st. cut and 2nd. cut of Indian, Pakistan,Turkey,Syria,Ubzekistan Origin.

(3) And, "Cotton Seeds", of Pakistan, African Countries & Indian Origin.

(4)"Cotton Seeds Cakes", & "Cotton Seeds Meals(de oiled cotton seeds cakes".

 

                                       COTTON LINTERS VARIETIES:-

      

            

RAW COTTON VARIETIES :-

 

       

 COTTON LINTER : INTRODUCTIONS

We can supply the best quality 100% Natural Cotton Linter to you. Our price is competitive and we assured of good cotton linters which can match your required specifications, and standards. and, can take responsibility to any quality uncertainty. Presently, we are looking forward to more cooperation with overseas based on mutual profit. Our items comply with International Quality Standards and their quality and durability are fully guranteed. Our factory can provide the most preferential profit to customers all over the world with competitive prices and high quality items.

We can export our 100% Natural Cotton Linter to Russia, Syria, New Zealand, Brazil, China, Ukraine, etc.

1st. cut cotton linters are always in best quality, B'cos both cotton linters products, 1st. cut and 2nd. cut produced from entirely different ways..
 
1st. cut produced from "Cotton Ginning Industries", in process of raw cotton in super cleaners, prior to press the bales. And, 1st. cut cotton linter's  staples length is 5 to 10 mm. maximum.
 
2nd. cut produced from "Cotton Seeds Expelling Industries", and from "Solvent or Oil Extractions plant" in the process in Delinted Machines., Lints removed from "Cotton Seeds",
2nd. cut cotton linters produced,the staples length are 2 mm. to 5mm. maximum.
 
3rd. cut cotton linters are little low grade varieties of 1st. cut cotton linters,
 
Fibre Types : Cotton - Gossypium species (various, depends where grown)
Cotton Linters - Short, coarse fibres which adheres to the cotton boll, after removal of the very long textile fibres. There are broadly three classes: Mill Run (Longest fibre), First cut(Long fibre) and Second cut (Shorter fibre)
 
Fibre Properties : Fibre Length mm Millrun/First cut 1.6-2.0; Second cut 1.0-1.4
Fibre Coarseness ?g/m Mill run /First cut 230-260; Second cut 200-250
Bauer McNett 14 mesh Screen Retention % Mill run/First cut 35-50; Second cut 1-20
 
Typical Uses...  

Cotton fibre has a very high alpha cellulose content, which makes this pulp ideal for producing long life archival papers. First cut cotton linters find uses in Artists Drawing papers, which must have a resistance to fading, neutrality and stability. These are heavier weight papers were the finish varies from a coarse surface for paint to a smooth surface for graphic work. First cut linters also find uses in some boards (eg. greetings cards)and Mill Run and First cut linters are used as extenders to the much longer Staple Cotton fibres, in currency papers.
 
Second cut linters are valued for their bulk and purity. In addition to uses in the above grades, Second cut linters are used in Fine and Security to add bulk and prestige value. For Fine papers requiring a good formation, care should be taken when selecting the linter grade to ensure that it is clear of "Fibre Knots". The latter, if present in large numbers in the pulp, can give rise to a poor formation or a "Fish Eye" problem.

The cleaned seed is then sent to gin stands, similar to those in cotton saw gins, where the linters are removed from the seed (delinted).  This linter removal process is usually done twice and the fibers are collected and pressed into 600 pound bales.  The linters of the highest grade, referred to as first-cut linters (longer more resilient fibers) are used in manufacturing non-chemical products, such as medical supplies, twine, and candle wicks.  The second-cut linters (short fibers or fuzz), removed in further delinting steps, are incorporated in chemical products, found in various foods, toiletries, film, and paper.
 
Typical Pulp Properties...  
Cotton linter pulps are available as ECF and TCF grades bleached to 88%+ ISO Brightness. Unrefined these pulps have a very high bulk, air permeance and opacity. On refining there is some development of Schopper Reigler wetness, but little development of strength properties. The opacity increases as refining proceeds due to the sheet closing up as the fibre shortens. The largest change on refining is a loss of air permeance.  
 
COTTON  LINTERS
FIBRE PROPERTIES: OF COTTON LINTERS,
Cotton Linters are usually obtained by delinting ginned seeds. Cotton Linters are obtained in 2 stages and 1st Cut, cotton linter have longer fibre length than 2nd Cut, cotton linters. Cotton Linters are very useful for paper board industry and thus wood pulp and other natural resources are saved.

Linter Cotton:

This cotton is the fuzz on cotton seeds which have been combed out the long fiber cotton used for cloth. This fuzz or linters is cut off the seeds before the seeds are made into cottonseed oil. The First Cut Cotton Linters or First Shear cotton linters are cut off the seeds before the seeds go to the mill. This First Shear cotton linters is very resilient and springy. It is used in higher grades of cotton batting. Although very resilient, First Shear cotton Linters , by itself, is not very stable in a futon. It is best used in combination with staple cotton.

Second Shear linter cotton is a lower quality cotton that is cut from cotton seeds at a cottonseed oil mill.

 

COTTON LINTERS:1st. cut & 2nd. cut. & 3rd. cut,: Stocks/Availability,

 
We can provide you 100% cotton Linter (Natural cotton Linters) In any big/bulk/hugh quantity You may required for 1st. cut & 2nd. cut & 3rd cut. We can supply cotton linters 500 mts. to 15,000 mts. We can supply your complete requirements of cotton linters 2nd. cut for your productions of "Nitrocellolose Resins" for explosives, and "Cellulose", and "Cotton Linters Pulp" plants

The cotton Linter would be packed in well pressed bales in the weight of 180 kg to 200kg. and one Container Posses 150 bales app. 25-26 MT. in 40 F containers. We can ship you with in 15 Days after receiving L/C at sight in our bank .
 

QUALITY & QUANTITY CONTROLS PARAMETERS, 

 
 
 

RE : PACKING LIST, PHYTOSANITARY AND FUMIGATION CERTIFICATE., & SGS cerificates ,

Wight & Quality : As per CIQ.

CIQ TERMS FOR WEIGHT AND QUALITY CERTIFICATE ALSO, WILL BE FURNISHED UPON REQUEST,

The specifications of "Cotton Linters".

   Physical & Chemical Characteristics:COTTON LINTERS.

 

A)    Physical Characteristics:

·         Material should be without any outside matters(such as straws or leaves) and without long fibers

·         Length of fibers: 0.925 – 2 cm

·         Diameter of fibers: 0.0205 mm

·         Heavy impurities (as sand)): 0.5% max.

 

B)     Chemical Characteristics:

·         Moisture: 7-8 %

·         Ash: 1.5 %

·         Alpha cellulose: 85% min.

·         Pentosan: 2 % max.

·         Extracting with water: 2 % max.

·         Extracting with Alsohol/ Benzene(1/2) L: 1 % max.

 

(1) Maturity:  75% (=/-5)

(2) Sulphate acid-infusibility matter:  3.5% (=/-1)

(3) Ash less than:   1.5 % (+/-0.2)

(4) Iron less than:  250ppm (MG/KG)E) Moisture:  8% (The real regain must be less than 8%, the quantity
Shall be the unloaded net weight. If the real regain is more than 12%, the
Buyer shall have
The right to reject the   goods)

(5)Whiteness and appearance:  correspond to
The authorized samples. G) Length of staple: 0.925 – 2 cm, (but,less than 5mm.

(6) No foreign fiber and no contamination.

(7) Foreign matter:  no more Than 3.0 to 5.0 %.

(8) Diameter of fibers: 0.0205 mm

(9)Heavy impurities (as sand): Less than 1.5 %,

 

 

The cargo of cotton linters should be devoid from the below vermin, pest, and agricultural parameters:

 

1)      Pctinophora Gossypiella

2)      Pctinophora Scutigera

3)      Helicoverpa Zea

4)      Earias Fabia

5)      Anthonomus Grandis

6)      Glomerella Gossypii

7)      Xanthomonas Campestris Pv. Malvacearum

 

     STASTICS OF COTTON LINTERS OF INDIA, 

There are many countries are manufacturing cotton linters , main countries are India,Syria and Turkey , Ubzekistan,Argentina and Pakistan : But, Indian Cotton Linters are amongs the best quality,

As far as my personal data is concerned, Total cotton linters productions of india is,in this fiscal year,3,00,000 ( 0.3 millions bales of cotton linters 1st. cut.),and 50,000 fifty thousands bales of cotton linters 2nd. cut produced in India,Most of the productions are consumed in India,No exports data availables of cotton linters of last 3 yrs,Total 3,00,000,00 ( 30 millions raw cotton bales produced this year 2006-7  in entire India),1,00,000,00 ( 10 millions, raw cotton bales from Gujarat,alone).

 RAW COTTON LINTERS COMPOSITION, METHOD OF MAKING AND USES.

 

In China, the cotton lints is divided into three ranks: 1st.cut, 2nd.cut or 3rd.cut.

 

  1st.cut:The cotton fibre hand-pull length should be over 13 mms (includes 13 mms). Be mainly used for knitting cotton blanket, sweat shirt...etc..

 

2nd.cut:The cotton fibre hand-pull length is less than 13 mms;and the weight of the fibre that the fibre length is less than 3 mms(include 3 mms), shares the percentage of all weight to be less than 58%. 2nd.cut mainly used to smokeless gunpowder and film, deluxe sheet etc..

 

3rd.cut: The cotton fibre hand-pull length is less than 13 mms;and the weight of the fibre that the fibre length is less than 3 mms(include 3 mms), shares the percentage of all weight to be more than 58%.3rd.cut mainly used for the deluxe sheet which manufactures a chemical fiber, such as cotton pulp.

 

Description : COTTON LINTERS: 1st-cut produced from "Cotton Ginning Industries", in process of raw cotton in super cleaners, prior to press the bales. And, 1st. cut cotton linter's staples length is 5 to 10 mm. maximum. 2nd-cut produced from "Cotton Seeds Expelling Industries", and from "Solvent or Oil Extractions plant" in the process in Delinted Machines., Lints removed from "Cotton Seeds", 2nd. cut cotton linters produced, the staples length are 2 mm. to 5mm. maximum. 3rd. cut cotton linters are little low-grade varieties of 1st. cut cotton linters, Fibre Types : Cotton - Gossypium species (various, depends where grown) Cotton Linters - Short, coarse fibres which adheres to the cotton boll, after removal of the very long textile fibres. There are broadly three classes: Mill Run (Longest fibre), First cut(Long fibre) and Second cut (Shorter fibre) Fibre Properties : Fibre Length mm Millrun/First cut 1.6- 2.0; Second cut 1.0-

 

COTTON SEEDS CAKES & COTTON SEEDS MEALS(DE OILED COTTON SEEDS CAKES):

Cotton Seed Cake :

We also offer cotton seed cakes that are the solid matter that remains once oil has been extracted and pressed from cotton seeds by using "Oil Expellers Machines", These cotton seed cakes are widely used in the industry for feeding cattle. Offered at competitive rates, our cotton seed cakes can be supplied to different parts of the world.In cotton seeds cakes there are 5 to 7.5 % can be remained.
 
Cotton Seeds Cakes Meals(de oiled cotton seeds cakes) :
 
These products can be manufactured by using solvent extractions OR oil extractions plant technology using Hexane Solvents etc. Cotton Seeds Cakes Meals(de oiled cotton seeds cakes)  are resudule product after oil extrcted from cotton seeds OR cotton seeds cakes. There are only 0.5 to 1.5 % oils remains in these products, Cotton Seeds Cakes Meals(de oiled cotton seeds cakes) :

A composition of a loose mass of comminuted raw cotton linter fibers has a bulk density of at least 8 g/100 ml and at least 50 % of the fibers in the mass passes through a US standard sieve size #10 (2 mm opening). This composition is made by obtaining a loose mass of first cut, second cut, third cut, or mill runs raw cotton linters or mixtures thereof and comminuting the loose mass of raw cotton linters to a size wherein at least 50 % pass through a US standard sieve size #10 (2 mm opening). This composition is used to make cellulose ether derivatives.

 Eco-friendly Cotton Seed Delinting Plant :-

It is design & development and testing of a pollution-free cotton seed delinting plant. The capacity of the indigenous cotton seed delinting plant is 1.0 TPH tonnes/hr. The plant is based on dry HCL gas generation without the use of sulphuric acid and has been installed at India, The new eco-friendly technology has been dully certified by the Pollution Control Board. The machines have been coated with taflan and lined with FRP for corrosion resistance. Electric power consumption has been minimized and the initial cost of installation is considerably lower than other imported and indigenous plants. The cotton linters after the delinting process are converted into a powder which could be further refined to pharmaceutical grade cellulose. Thus, the process of obtaining clean cotton seed after delinting has been made completely eco-ftiendly without any adverse environmental effect. The technology is available for commercialization.

  

VERY IMPORTANT USES OF "COTTON LINTERS"

          OUR OTHER PRODUCTIONS :

         "RAW COTTON", & "BIODEGRADABLE,GREASE"

 
Cotton Ginners, Harij,N.Gujarat,India,
Mfr.V-797 Kalyan Cotton & Shanker-6.
INDIA PRODUCING 30 millions,RAW COTTON BALES PER YEAR, AND MY STATE OF GUJARAT ALONE PRODUCED 10 millions,RAW COTTON BALES PER YEAR,
 
Manufacturer of:"Grease,Biodegradable" Based of Castor Oil.
Prices : $1.50 per Kgs.fob,