https //canon.com/ijsetup mx490 Latest Updated
Find updated canon printers app, drivers & manual for canon Pixma photo printer. We offer canon printer setup resources & canon support for canon printers.
Canon Mx490 Printer Install | Canon Mx490 Printer Setup
It is important that you know what its requirements are before you plan to go to https //canon.com/ijsetup mx490. For this link, you need a router or modem at home and the access points should function properly. To make this Canon MX490 setup you should have a device with an internet connection. It can be a computer or a mobile phone.
Canon MX490 Printer Unboxing and First-Time Setup
Cut open the printer’s shipment package and remove all the packing materials. Remove the plastic cover from the printer and place it on a clean table.
Take out the installation CD-ROM, setup manual, and other accessories from the box. Read the setup manually before you begin with the canon printer setup process.
Remove the styrofoam packaging from the sides of the printer. Now, peel off the stickers from the printer. Remove the packing materials from the scanner glass and feeder.
Grab the power cord provided with the printer and plug the cable into the power supply slot. Attach the other terminal of the power cord into the printer’s rear.
Tap the Power button on the printer’s control panel and proceed to install the ink cartridges. Now, load papers into the input tray and install the required printer driver on your computer.
Install Canon Printer Driver | Follow the Procedure
To start with the installation procedure, power off the Canon printer. Now, start the installer on your computer. Click the link given on this site to download the printer drivers.
After the downloading process is complete, double-click on the printer icon in the Downloads folder.
In a Windows computer, administrative rights are required to install or uninstall any software on your computer.
Select OK or Allow to continue with the printer driver installation process.
To use the Canon printer over a network, manually choose the connection destination from the client.
Click Cancel in the Connect Cable screen, and select Yes on the confirmation screen.
Choose the Select Printer Port check box and click the Manual Selection option.
Choose the appropriate port and click Complete. Restart your computer to conclude the canon printer driver installation.
You can perform the same steps to install both the MP or XPS drivers on your computer.
Wireless Connection Without Wireless Router In Canon MX490
Navigate to the Settings option and select the Device Settings option. Choose the LAN Settings option followed by the Change LAN option.
Select the Access Point Mode option on the next screen. Tap SSID. Press the Back button after verifying the SSID Information.
The next step is to set a Security Protocol and verify the password. Initiate the setup process by pressing the Start Setup option.
Go to the computer and right-click on the Wireless icon. Choose the View Available Wireless Networks option.
Choose a wireless network of your choice and specify the Network Key. Click the Connect option.
The wireless connection process of the https //canon.com/ijsetup mx490 Setup is now complete.
How To Reset Canon MX490 printer?
Read the guidelines mentioned below to reset the Canon MX 490 printer.
Press the Power button on your Canon MX490 while it is on to turn it off. Touch and hold the Stop button for two seconds.
While holding the Stop button, press and hold the Power button. Now, let go of the Stop button but continue pressing the Power button.
Tap the Stop button five times with your free hand and let go of the Power button.
The LCD goes blank and then makes some noise. After the noise stops, press the Power button to restart the Canon Pixma MX490 Setup.
Apple Airprint Setup In Canon MX490
Initially, download the Pixma Solutions app on your iPhone or iPod.
The Pixma Solutions app is available for download in the Apple store.
Install the application on your iPhone or iPod.
Make sure to turn on your printer and connect it to the wireless network that your iPhone is connected to.
Open the Pixma Solution app on your iPhone.
Find the document you want to print and select your printer by clicking the share icon.
Enter the authentication details if required and wait for the print operation to initiate. Now the printer starts the print operation.
We Assist You For The Following
Canon completely combats with all Windows products. We provide the necessary info to configure, utilize and install your canon products-Windows Computer as per https //canon.com/ijsetup mx490
We provide canon ij setup full assistance for Mac users to attain better canon experience. Our experts also provide full functionality ranges.
The products of the canon are completely compatible with all types of smartphones available. We offer Good and quality print solutions with our Top rated Tech support experts, they follow https //canon.com/ijsetup mx490 rules