Custom Wood Remote Gadgets



Welcome to Spacenerd Wood Multirotors. This is a custom quadcopter with a hand painted wood frame. This quadcopter features lighting kit, the Naza-m lite flight controller, hand balanced propellers, and a 6 channel mode 2 transmitter and receiver. This is a ready to fly kit with the options to satisfy the beginner pilot all the way up to the advanced pilot. 
100% Made In USA 

All handmade with 1/2" poplar arms and 1/8" birch plywood, this frame reduces virbration, making for a quiet model. No glue was used in the structure, all bolts and cable ties allow for easy replacement of electronics and frame parts. A large deck to mount and customize your own FPV or sports camera. The finish of the model parts are acrylic paint coats with a semigloss acrylic sealer to protect from moisture and dust in the field. The wide stance of the arms leaves room for your wide angle lens if you decide to mount a camera. The wide shape of the frame helps in stability during yaw maneuvers for smooth panning of a camera. The Greenmax stands 6" tall to top of the Naza polycarbonate cover plate.  

This is a rare quadcopter kit that has been through all the paces to get you flying in no time. The Naza M Lite creates a solid flight system that's easy to tune for student pilots. All flight tested with various 3cell lipo batteries and standard 9" propellers. A 5000mah lipo produced a 8-10 minute flight. The 920kv motors make propeller installation a breeze with reverse threads on the motors.  

When you decide to add equipment, it is easy to balance the craft with the battery tray and velcro straps. Secure the battery and hold the model by the polycarbonate cover on top to get an accurate balance for flight. The longer power cable reaches all battery positions.  

The lighting package is uses 24 rgb leds that have been wired to specific colors to maintain proper orientation at dusk or night. The led rings were created to give illumination to the model as well as an unrestricted view of all four motors.  

Specs:  

Naza M Lite Flight controller (no gps or compass)  

920 kv motors  

30 amp escs  

Weight: 725 grams (with no battery)  

3mm and 4mm Hardware (All stainless except motor mounts)  

Full led lighting kit with seperate power connection  

All handmade sealed wood frame  

5/16" Aluminum landing gear and mounting spacers  

Rubber tubing on feet to protect ends  

and provide leveling of the model  

2x Battery straps  

4x 9" Propellers balanced by hand  

6 Channel transmitter and receiver  

Servo cables for the Naza  

Model Flight Tested  

Naza Settings come preloaded in model and ready for the first mission.  

Copy Links to see all items for purchase:

http://www.ebay.com/itm/-/181738057240?roken=cUgayN&soutkn=SD6wiV via @eBay

http://www.ebay.com/itm/-/181738057762?roken=cUgayN&soutkn=n8WVAA via @eBay

http://www.ebay.com/itm/-/181766966798?roken=cUgayN&soutkn=EnSvzj via @eBay

Please visit the flight video here:  

Spacenerd Multirotors








CUSTOM REMOTE CONTROL GADGETS
    THE COLLECTION OF GADGETS TO CONQUER LAND, SEA, AND AIR
    
    




Humans

 




  




Subpages (3): Customize Locomotion Toy Lab
Comments