LAUNDRY EQUIPMENT SERVICES. LAUNDRY EQUIPMENT

Laundry Equipment Services. Handheld Test Equipment. Pre School Equipment Suppliers.

Laundry Equipment Services


laundry equipment services
    equipment services
  • The selling, installation, rebuilding, conversion, repair, inspection, testing, survey or calibration of equipment which can affect compliance with 15A NCAC 11 by a licensee or registrant.
    laundry
  • Clothes and linens that need to be washed or that have been newly washed
  • workplace where clothes are washed and ironed
  • garments or white goods that can be cleaned by laundering
  • Laundry is a noun that refers to the act of washing clothing and linens, the place where that washing is done, and/or that which needs to be, is being, or has been laundered.
  • A room in a house, hotel, or institution where clothes and linens can be washed and ironed
  • The action or process of washing such items
laundry equipment services - The 2011
The 2011 Report on Commercial and Service Industry Machinery Manufacturing Excluding Automatic Vending Machines, Commercial Laundry, Dry Cleaning and ... Equipment: World Market Segmentation by City
The 2011 Report on Commercial and Service Industry Machinery Manufacturing Excluding Automatic Vending Machines, Commercial Laundry, Dry Cleaning and ... Equipment: World Market Segmentation by City
This report was created for global strategic planners who cannot be content with traditional methods of segmenting world markets. With the advent of a "borderless world", cities become a more important criteria in prioritizing markets, as opposed to regions, continents, or countries. This report covers the top 2000 cities in over 200 countries. It does so by reporting the estimated market size (in terms of latent demand) for each major city of the world. It then ranks these cities and reports them in terms of their size as a percent of the country where they are located, their geographic region (e.g. Africa, Asia, Europe, Middle East, North America, Latin America), and the total world market.

In performing various economic analyses for its clients, I have been occasionally asked to investigate the market potential for various products and services across cities. The purpose of the studies is to understand the density of demand within a country and the extent to which a city might be used as a point of distribution within its region. From an economic perspective, however, a city does not represent a population within rigid geographical boundaries. To an economist or strategic planner, a city represents an area of dominant influence over markets in adjacent areas. This influence varies from one industry to another, but also from one period of time to another.

In what follows, I summarize the economic potential for the world's major cities for "commercial and service industry machinery manufacturing excluding automatic vending machines, commercial laundry, dry cleaning and pressing machines, office machinery, optical instruments and lenses, and photographic and photocopying equipment" for the year 2011. The goal of this report is to report my findings on the real economic potential, or what an economist calls the latent demand, represented by a city when defined as an area of dominant influence. The

78% (6)
Seaview Hospital: Power House and Laundry
Seaview Hospital: Power House and Laundry
Seaview Hospital Historic District, Staten Island The power house complex is located 225 feet west of the staff residence and is the first of the major Seaview Hospital buildings to be seen from the main entry road leading up from Brielle Avenue. The major component-- the power house and laundry building-- was originally an L-shaped structure; the north-south leg contained the power house and the east-west leg, the laundry. An additional smaller rectangular building, the pathology laboratory, was to have been located just east of the laundry wing, at right angles to it and connected with the west end of the elliptical corridor linking the patient pavilions. This structure was apparently never built, but had the original design been completed the plan of the resulting ensemble would have provided what was basically a mirror image of the nurses' residence at the opposite or east end of the elliptical corridor. Many of the design elements used further integrated this service group with the other structures comprising the original Seaview Hospital complex. A long hipped roof extends over the two-story laundry-wing section of the structure and is covered by red terra-cotta tiles. Several small gabled dormers and a copper-clad vent appear; a large copper-clad bulkhead abuts the eave at mid-point on the south side. The eaves are also copper clad. Walls, as they are elsewhere, are smooth-faced concrete; these are presently a rosy gold. Very large window openings are used in the laundry wing; they contain triple windows each filled with nine-over-nine sash. The power house lacks "fenestration. There is a tall gabled monitor roof which extends the length of this wing. Large copper-clad ventilators are located on the ridge line. Below the monitor there are pitched roofs, once probably tiled with terra cotta. The northern or short end of the power house is treated as a main facade; its design relates to the northern facade of the staff residence further east. The tall foundation section of the power house is. coursed in a similar manner, and the pedimented gable produced on this facade by the monitor profile picks up the motif of the single large dormer of the staff residence. The face of the monitor section is clad in copper and contains three square windows; terra-cotta coping emphasizes the flanking pitched roofs. Panelling relieves the tall section of blank wall extending between the monitor and the foundation level. A tall smokestack of yellow brick stands just east of the northern end of the power house wing. It rises from a high faceted podium ornamented by rectangular inset panels of blue tile enclosed by gold borders. A projecting bracketed cornice encircles the top of the podium; above, large blue tile scarabs are applied around the base of the stack. The mouth of the stack is emphasized by a tall decorative band carried on corbels. The band is divided by attached pilasters; the red brick infill between them is ornamented by tile scarabs placed just below the corbelled cornice-like band which terminates the stack. The original ambulance house lies to the east of the smokestack. It is a one-story structure covered by a copper-clad hipped roof. Dormer-like arrangements with casement windows topped by a stepped pediment break the eaves. Wall surfaces are covered by a grayish smooth-faced concrete and may suggest the original color employed for all the Seaview Hospital structures. Window openings are segmentally arched. The original vehicle entrance on the north side has been obscured by a later addition. The 1935 addition designed by Charles B. Meyers is attached to the west flank of the original power house wing. Constructed of cast concrete, it is equal in height to the original structure and covered by a monitor roof which runs, however, east-west. The window arrangement in the pedimented gable formed by the end of the monitor is similar to that employed by Almirall for the northern facade. Lower portions of this west elevation also reflect Almirall's design. The smokestack located just south of this addition rises from a simple base; the decorative band at the mouth is similar to that of the earlier stack. Although not the subject of this designation, the vast interior spaces of the original power house and its addition, together with the impressive array of mechanical equipment-- the boilers, furnaces , coal bunkers and conveyers-- are eminently noteworthy. - From the 1985 NYCLPC Landmark Historic District Designation Report
Waiting for a train, 1969.
Waiting for a train, 1969.
I should have been at work when this was taken. Actually it wasn't my fault. My mother had overslept and not woken me. It was my first job, delivering for a linen hire firm, and I had probably been roped into doing one or other of the regular Saturday morning overtime jobs ..."Universities" (the firm had a contract to supply all the buildings of Bristol University), "back calls" or (the short straw) sweeping up, referred to in the argot of the laundry as "shit-shovelling". So, by mid-morning I was at Temple Meads Station and took this photo while I was waiting for a train to Pontypridd. Nowadays this engaging platform clutter has all but disappeared. Long lines of "Brutes", freighted with mailbags and noisily towed along the platforms of our large stations by electric tugs have vanished, the mail now carried by road in charmless articulated lorries. Note the entwined monogram of the Great Western Railway in the feet of the wooden seat. I think these seats survive in considerable numbers, but as a self-conscious "heritage" feature, their letters picked out in unsuitable pseudo-Victorian colours. At Mangotsfield Station I once saw a passenger taken off a train stone dead and hauled away on one of those four-wheeled trolleys in the foreground. The train at the opposite platform (composed of BR Mark IIb stock, I think) carries yellow metal signs announcing "Paddington - Bristol" in tatty stick-on letters. These were supposed to be replacements for the lovely signwritten "roofboards" which had still been carried on main-line "express" trains in the fairly recent past. The roofboards survived (in degraded form) into the 1970s on the Poole - Manchester service. The yellow signs did not long survive the date of this photograph, Saturday 8th November 1969.

laundry equipment services
laundry equipment services
The 2009 Report on Commercial and Service Industry Machinery Manufacturing Excluding Automatic Vending Machines, Commercial Laundry, Dry Cleaning and Pressing ... Equipment: World Market Segmentation by City
This report was created for global strategic planners who cannot be content with traditional methods of segmenting world markets. With the advent of a "borderless world", cities become a more important criteria in prioritizing markets, as opposed to regions, continents, or countries. This report covers the top 2000 cities in over 200 countries. It does so by reporting the estimated market size (in terms of latent demand) for each major city of the world. It then ranks these cities and reports them in terms of their size as a percent of the country where they are located, their geographic region (e.g. Africa, Asia, Europe, Middle East, North America, Latin America), and the total world market.

In performing various economic analyses for its clients, I have been occasionally asked to investigate the market potential for various products and services across cities. The purpose of the studies is to understand the density of demand within a country and the extent to which a city might be used as a point of distribution within its region. From an economic perspective, however, a city does not represent a population within rigid geographical boundaries. To an economist or strategic planner, a city represents an area of dominant influence over markets in adjacent areas. This influence varies from one industry to another, but also from one period of time to another.

In what follows, I summarize the economic potential for the world's major cities for "commercial and service industry machinery manufacturing excluding automatic vending machines, commercial laundry, dry cleaning and pressing machines, office machinery, optical instruments and lenses, and photographic and photocopying equipment" for the year 2009. The goal of this report is to report my findings on the real economic potential, or what an economist calls the latent demand, represented by a city when defined as an area of dominant influence. The reader needs to realize that latent demand may or may not represent real sales.

Related topics:
techno music equipment
sencore test equipment
interstate food equipment service
maywood garage equipment
used fitness equipment mississauga
council playground equipment
demo video equipment
modern handling equipment
video conferencing equipment uk
Comments