Jesus Manuel Dorador-Gonzalez, PhD

Senior Lecturer, Department of Mechatronics Engineering
Phone: 56228050 and 51 (ext 117)

Background

Obtained his bachelor's degree in Mechanical and Electrical Engineering from UNAM. The Master of Mechanical Engineering, Design and Manufacturing option, was made in the Division of Graduate Studies of the Faculty of Engineering UNAM did a degree in Industrial Automation and obtained his doctorate at the Loughborough University, England.

 

He is currently Head of the Department of Mechatronics Engineering and Professor Titular "C" Full Time at the Faculty of Engineering of the UNAM. He has taught courses in the areas of Design, Manufacturing & Automation, both as a graduate degree. Level 1 is National Researcher in the National System of Researchers.

 

As a project leader at the Mechanical Design and Technological Innovation Center of the Faculty of Engineering, UNAM has lead 15 research and technological development projects, having currently four in process.

 

He has published 40 articles in reports from national and international congresses and articles in international refereed journals.

 

He has supervised 57 theses in the areas of mechanical engineering, industrial engineering, engineering, mechatronics and computer engineering at undergraduate and postgraduate level.

 

He was president of the Mexican Society of Mechanical Engineering during the 2006-2008 biennium.

 

In 2006 was awarded with the Young Academics UNAM in the field of Education in Exact Sciences.
External activities
CACEI evaluator, in CIEES Evaluator, Member of the Technical Council of Mechatronics CENEVAL.
Areas of interest and expertise
Prosthesis design, Design for assembly, Design for manufacturing, Mechanical Design, Mechatronic Design, Product design

Workgroups

Most recent publications

Magazine
  • González-Villela, VJ, Parkin R., López-Parra, M., Dorador-González, JM, Guadarrama-Liho, MJ, 2004, A MOBILE ROBOT WITH WHEELER obstacle avoidance capability. Mechanical Engineering Technology and Development. Vol 1, No. 5, Year 3.
  • Dorador, JM, Young, RIM, 2000, "Application of IDEF0, UML Methodologies IDEF3 AND CREATION IN THE MODELS OF INFORMATION." International Journal of Computer Integrated Manufacturing, Vol 13, No. 5, pp. 430-445. ISSN: 0951 - 192X
Magazine
  • Dorador González, Jesús Manuel, "Intelligent Prosthesis". Science and Development. July 2005, Vol 30, No. 185, pages 40-45. ISSN 0185-0008,
  • Dorador González, Jesús Manuel; RIVERS Patricia Murillo, Ana Itzel and JUÁREZ FLORES LUNA MENDOZA. "Robotics and intelligent prosthesis. Revista Digital Universitaria [online]. January 18, 2005, Vol 6, No. 1.[Consulted: January 19, 2005]. Available online: <>
  • ISSN: 1607-6079
In international conferences
  • Serafín Cedeño Castaneda, Emilio Sánchez Medina, Humberto Mancilla Alosno, Jesús Manuel Dorador González , 2008, "Design of a mechanism for moving ARTICLES OF EIGHT LINK", XIV International Congress of the Mexican Society of Mechanical Engineering, Puebla, Mexico, September 2008. ISBN 978-968-9773-03-8
  • Fernando Villegas Velasquez, Saúl Gutiérrez Santillán, Jesús Manuel Dorador González, 2008, EVOLUTIONARY STRUCTURAL OPTIMIZATION MODELS FOR TWO-DIMENSIONAL MODELING PARAMETERS. EVENT PLANNING EFFORTS "XIV International Congress of the Mexican Society of Mechanical Engineering, Puebla, Mexico, in September 2008. ISBN 978-968-9773-03-8
  • Navarrete Becerril Fernando, Ulises Peñuelas Rivas, Pilar Lira Corona, Iván Díaz Lavan Nieto, Jesús Manuel Dorador González, 2007   "AUTOMATION OF A MACHINE ground glass" XIII International Congress of the Mexican Society of Mechanical Engineering, Durango, Mexico, in September 2007. ISBN 968-9173-02-2
  • Ileana B. Garcia Valenzuela, Patricia A. Rios Murillo, Alvaro Ayala Ruiz, Jesús Manuel Dorador González, 2007   "DETERMINATION OF SPECIFICATIONS FOR THE DESIGN OF A VAGINAL SPECULATOR FOR THE PREVENTION OF EARLY cervical cancer", XIII International Congress of the Mexican Society of Mechanical Engineering, Durango, Mexico, in September 2007. ISBN 968-9173-02-2
  • Barcenas Fernando Cortes, Ulises M. Peñuelas Rivas, Juan Carlos Contreras Licona, Jesús Manuel Dorador González, 2007, "Machine Design INCUBATOR AUTOMATIC EGG", XIII International Congress of the Mexican Society of Mechanical Engineering, Durango, Mexico, in September 2007. ISBN 968-9173-02 -- 2
  • Erik Medina Peña, Ulises Peñuelas Rivas, Ángel Rojas Salgado, Ociel Flores Díaz, Jesús Manuel Dorador González, 2007, "REDESIGN OF A ROBOT WITH A BASE functionality," XIII International Congress of the Mexican Society of Mechanical Engineering, Durango, Mexico, September 2007. ISBN 968-9173-02-2
  •  JM Dorador González, RI Flores Luna, AM Juarez Mendoza. "PROTOTYPE DESIGN OF HAND PROSTHESIS Mechatronics, 2006, XII International Congress of the Mexican Society of Mechanical Engineering, Acapulco, Mexico, in September 2006.
  •  Lisette Simon Farah, Hanna Lesly Garcia Guerra, Jesús Manuel DoradorGonzález, "DESIGN OF AN ADJUSTABLE SOCKET FOR LOWER limb prostheses," 2006, XII International Congress of the Mexican Society of Mechanical Engineering, Acapulco, Mexico, in September 2006.
  •  Cedeño Castaneda, S., Alonso Mancilla, H., Hernández-Delgadillo, A., Dorador González, JM, "PROFIBUS-DP INDUSTRIAL NETWORK FOR THE CONTROL OF A servo radio stations AUTOMATIC, 2006, XII International Congress of the Mexican Society Mechanical Engineering, Acapulco, Mexico, in September 2006.
  •  Sanchez, J., Padilla, S., Dorador, JM "NEW FACILITIES OF VIRTUAL MACHINES: MACHINES FROM OPERATING CAD browsers, for analysis." 2006, International Measurement Confederation (IMEKO) World Congress.Brazil.
  •  Espinosa, A., Dorador, JM "A WORKING MODEL FOR A NEW MEXICAN ENGINEERING DESIGN CENTER IN THE NATIONAL UNIVERSITY OF MEXICO. 2006 ASME International Design Engineering Technical Conferences.Philadelphia.
  •  Castaneda, S., Mancilla, H., Hernandez, A., Hurtado, G., Dorador, JM, Santillan, S., 2005, "Using Trapezoidal TRAJECTORIES AND QUÍNTICAS KINEMATICS IN AN AUTOMATED radio station." In the XI International Congress of the Mexican Society of Mechanical Engineering and Bolivariano IV Congress of Mechanical Engineering, Morelia, Mexico, in September 2005.
  •  Rios, P., Roether, G, Dorador, JM, 2005, "Design, manufacture and testing of a prototype mechanical arm for upper limb prosthesis. In the XI International Congress of the Mexican Society of Mechanical Engineering and Bolivariano IV Congress of Mechanical Engineering, Morelia, Mexico, in September 2005.
  •  Dorador, JM Armenta, MS, Ramírez, T., Chavez, C., Corona, S., 2005, "DESIGN FOR ASSEMBLY EVALUATION FOR LARGE AND HEAVY ITEMS. In the XI International Congress of the Mexican Society of Mechanical Engineering and Bolivariano IV Congress of Mechanical Engineering, Morelia, Mexico, in September 2005.
  • Valenzuela, I., Santiago, A., Dorador, JM, 2005, ERGONOMICS upper limb. " In the XI International Congress of the Mexican Society of Mechanical Engineering and Bolivariano IV Congress of Mechanical Engineering, Morelia, Mexico, in September 2005.
  •  González, V., Parkin, R. Lopez, M., Dorador, JM, 2005, "DYNAMIC TORQUE CONTROL EXTENSION FOR A MOBILE ROBOT WITH WHEELER CAPABILITY Obstacle Avoidance." In the XI International Congress of the Mexican Society of Mechanical Engineering and Bolivariano IV Congress of Mechanical Engineering, Morelia, Mexico, September 2005
  •  Dorador, JM, Gonzalez VJ, 2003 "The Mechatronics Engineering Career at UNAM," The International Conference on Mechatronics 2003 (ICOM2003), Loughborough, England, June, 2003. ISBN 1860584209
  •  Young, RIM, Wang, S., Dorador, JM, Costa, CA, Zhao, J., 2001, "A SHARED INFORMATION / KNOWLEDGE ENVIRONMENT TO SUPPORT CONCURRENT ENGINEERING, ISPE/CE2001, Eighth ISPE International Conference on Concurrent Engineering Research and Applications, California, USA, 29 July-1 August 2001, ISBN 0 - 9710461-0-7
  •  Young, RIM, Dorador, JM, Zhao, J., Cheung, WM, 2000, "A MANUFACTURING INFORMATION INFRASTRUCTURE TO LINK TO GLOBAL DESIGN TEAM BASED MANUFACTURE", Proceedings of the 4th International Conference on Design and Information Infrastructure Systems for Manufacturing 2000 ( DIISM 2000), Melbourne, Australia, 15-17 November, 2000. ISBN: 0 - 7923-7358-8
  •  Cheung, WM, Zhao, J., Dorador, JM, Young, RIM, 2000, LINKING PRODUCT DESIGN AND MANUFACTURING CAPABILITY THROUGH A MANUFACTURING STRATEGY REPRESENTATION ", Proceedings of the 16th International Conference on Computer-Aided Production Engineering (CAPE2000), EDINBURGH , UK, August 7-9, 2000 Professional Engineering Publishing, ISSN 1356-1448, ISBN 1 86058 263 X, pp. 615-622.
  •  Young, RIM, Canciglieri-JNR O., Costa, CA, Dorador, JM, Zhao, J., Cheung, WM, 2000, "INFORMATION SUPPORT IN AN INTEGRATED PRODUCT DEVELOPMENT SYSTEM", 3rd International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2000), Montréal (Québec) Canada, 16-19 May 2000. ISBN 2-553 - 00803-1
National
  • Jesus Manuel Dorador, Rosa Luna Itzel Flores, Ana Juarez Marissa Mendoza, Adriana Lopez Zazueta, "PROTOTYPE DESIGN OF HAND PROSTHESIS Mechatronics. Participation in the Third Meeting of Women in Science, Optics Research Center, Leon, Guanajuato. May 2006.
  • Lisette Simon Farah, Hanna Lesly Garcia Guerra, Jesús Manuel González Dorador. "INTELLIGENT DESIGN OF PROSTHESIS," The Third Meeting Participation of Women in Science, Optics Research Center, Leon, Guanajuato. May 2006.
  • Jesús Manuel Dorador González, "Design of a prosthetic arm Mechatronics. In the National Congress of Industrial Technology 2005, Universidad Tecnológica Metropolitana, Mérida, Yucatán. April 2005.
  • Jesús Manuel Dorador González, RESEARCH AND TEACHING ENGINEERING IN THE Mecatronics FI, UNAM. In the First Congress "Research in the Faculties and Schools" organized by the Secretaría de Desarrollo Institucional de la UNAM
  • Luna Rosa Itzel Flores, Ana Juarez Marissa Mendoza, Eduardo Pinzon Castillo, Jesús Manuel Dorador González, "NEWS AND TRENDS IN THE DESIGN OF PROSTHESIS upper limb." In the X National Congress of the SOMIM, Querétaro, September, 2004
  • Carlos Vara, Alvaro Ayala, Jesus M. Dorador. "A robot remotely over the Internet". In the X National Congress of the SOMIM, Querétaro, September, 2004
  • Miguel Angel Flores Rentaría, Vicente Borja Ramirez, Marcelo López Parra, Jesús Manuel Dorador González Alvaro Ayala Ruiz, "MAQUINARIA setup process." In the X National Congress of the SOMIM, Querétaro, September, 2004
  • Patricia Rios Araceli Murillo, Louth John Albert Marquez, Jesus Manuel Dorador Gonzalez, "USE OF MATERIALS WITH MEMORY FOR ACTION FORM OF A FINGER PROSTHESIS upper limb." In the X National Congress of the SOMIM, Querétaro, September, 2004
  • Javier Fernández Hernández, Juan Carlos Torres Márquez, María del Socorro Servín Armenta, Jesus Manuel Dorador Gonzalez, PRODUCT DEVELOPMENT MODEL FOR CONCURRENT ENGINEERING USING AML.In the X National Congress of the SOMIM, Querétaro, September, 2004
  • Auto González, JM, "Creating the Career of Mechatronics Engineering at the Faculty of Engineering, UNAM" XXXI National Conference of Engineering, National Association of Colleges and Schools of Engineering (ANFEI). Tijuana, Mexico. June, 2004
  • Campa Cruz, HJ, Dorador Gonzalez, JM, 2003, "Instrumentation and Automatic Control of an industrial production process of epoxidized soybean oil," In the Ninth National Congress of the SOMIM, Veracruz, September, 2003
  • Dorador González, JM, Servin Armenta, MS, Young, RIM, 2003, "Models of Information Systems to Support Integrated Product Design and Manufacturing," In the Ninth National Congress of the SOMIM, Veracruz, September, 2003
  • Armenta, MS, Ayala, A., Dorador, JM, 2002 "Models of information to assist in design for assembly" in the VIII National Congress of SOMIM, Monterrey, NL September, 2002
  • Flores, MA, Borja, V., Dorador, JM, 2002, "Specification of information to a model of the product that helped in shaping machinery" in the VIII National Congress of SOMIM, Monterrey, NL September, 2002
  • Dorador, JM, 2002, "Building a career in Mechatronic Engineering at the Faculty of Engineering, UNAM, in the Eighth National Congress of SOMIM, Monterrey, NL September, 2002

Lectures
Product design, Mechanics of Materials, Engineering Project
Links
Comments