Security Camera Installation Sacramento

Picture Of Security Camera Installation Sacramento

Step 1: Mounting

You'll find three basic parts for installing a burglar alarm camera. First thing you must decide when security camera is how to mount it. Try to mount the safety camera somewhere enough that if someone would like to tamper by it they won’t be capable of reach it from walk-out. If this is likely to be an indoor surveillance camera it is best to place the security camera with the corner of a room. 

A dome security camera equipped with a regular 4mm or 3.6 mm lens gives you an 85 degree to 92 degree view angle that can allow you to cover most rooms with one wireless security camera. Now if the safety camera is going to be an outdoor security camera, make sure the wireless security camera is weatherproof and has an infrared LED function for nighttime viewing.

Step 2: Powering

Next you must take under consideration is how you’re gonna power this security camera. All video cameras have two cables that must be connected for this to work. The initial cable is for power and the second cable is good for video. In case you are mounting a security alarm camera and you have a power outlet at the security camera then you certainly won’t have to worry about this. More often than not this won’t happen: most likely you are mounting the safety camera somewhere that won’t have got power outlet nearby. 

When installing wireless security camera and you be aware of distance in the security camera is 100ft or less from your viewing or recording device, you can use a RCA cable for all installations of security cameras. If your security camera is further then 100ft we’ll suggest that you use Coaxial Siamese Cable (power and video bundle into one cable) to become proficient to run one cable (as an alternative to two). In cases like this what you have to do is get a male power adapter connector (known in the market as male “pigtail”). This may allow you to get the energy source from some other place and not necessarily in the location of the security camera.

Next, you are going to connect the pigtail towards the power connector on the security camera. At the end of the pigtail there'll be two open wires one for positive (all black with white line dash) the other for negative (black). Connect the right wire to the Coaxial Siamese cable power connection: positive fits positive and negative complements negative. 

At the other end with the coaxial cable connect a lady pigtail to the two open wires in the coaxial cable and repeat exactly the same step, positive picking positive and negative picking negative. You might have just bridged the space needed for your security camera to give it a power source. Just connect a 12V power adapter (make sure you get the right amp your security camera requires because some infrared surveillance camera requires more amps to power the infrared LED) on the female pigtail connector and you really are done with power.

Step 3: Connecting to output

The very last thing you must do when installing a burglar camera is that you need to hook up to where the video will either be viewed or recorded. For connecting the video you'll need BNC connectors: one with the security camera and something at the recording or viewing end. To watch a single home security camera you can connect that straight to your VCR and after that to your TV however, you need to get a BNC to RCA adapter. For multiple video cameras we recommend that you employ a standalone DVR (digital video recorder). 

With the technology nowadays, and standalone DVRs being so inexpensive, you should always consider this method. The best part about utilizing a standalone DVR could be the remote viewing. This function will help you remotely log in your home security system from anywhere on this planet via the internet.