How To make some things work with BifferBoard.
Hardware:
Connect to serial console
Connect to serial console from Windows
Making your own console cable
Get 4 extra GPIO pins using the JTAG connector
Use serial RX/TX pins as GPIO
Power bifferboard from 12VDC battery
Use Bifferboard as network audio player
Use Bifferboard as Serial to Network adapter
Use button to reset bifferboard
Power bifferboard and USB hub from one PSU
Connect to Internet using a Huawei Mobile Broadband Modem
Connect to a Serial GPS Module
Connect to USB GPS
Install a MicroSD slot in the case
Simple DIY serial adaptor
Connect to JTAG and Serial at the same time
Software:
Using the Bifferboard as a streaming webcam
Setting up Qemu for emulating the Bifferboard
Upload new firmware (Flash kernel and upload rootfs)
Revert back to factory firmware (openwrt)
Write to Flash RAM from within Linux
use bifferboard without serial (programming) cable
get files onto the bifferboard
Install opkg files
Set correct time
Control the red LED using GPIO and BASH
Custom operating systems
Get SSH access via 3G