Home

For a better mobile experience, click here.

Features of LED lights

Commercial Led Lighting

The units come with many identifying features that include:

Industrial Led Lighting
Aluminum heat sink:
LEDs operate best when the heat is conducted away from them. Since aluminum is a good heat conductor it effectively conducts heat away from the lights and this not only helps the unit to work more effectively but also last for a long time.

Mercury-free: Mercury is a harmful chemical when you are exposed to it at high levels. Since the lights don't have the chemical, you don't have to worry about how you are going to dispose it. You can dispose it anywhere without having to mind that children or animals will get into contact with the chemical.

No ballast required: Ballast is necessary when you are striking balance in certain lights such as fluorescent. Unfortunately, it adds to the cost of lighting as it increases power consumption. Since the LED lights don't have ballast they don't consume a lot of power.

Shock resistant: LEDs don't have fragile elements that might snap due to vibrations. Due to this, you don't have to worry about the lights getting damaged during installation.


Reasons why you should consider installing LED lights

If you are looking for light bulbs for your home or office you should go for LEDs. Some of the reasons why you should go for them include:

They are a directional light source: According to the manufacturers, the lights emit light at an 110-degree pattern. Due to this, they hit the 110-degree angle which increases their chances of hitting their intended target thus you see more clearly.

They don't give off UV: UV light is known to cause signage and fading of colors in fabrics. It also causes eye fatigue and strain. Since the lights don't emit light in the non-visible light spectrum you don't have to worry about your eyes getting damaged or your fabrics fading.

They make air conditioning more efficient: LEDs produce less heat. This means that the air conditioner works efficiently and without much struggle.



A Buyer's Guide to LED Lighting Power Supplies

As LED lighting is becoming increasingly popular in architectural lighting, task lighting, medical lighting (particularly for use in surgical theatres), transportation, entertainment, and even household lighting. This article intends to be a comprehensive guide to their utility, what the advantages that LED lighting possesses over other types of lighting and how to select an appropriate power source for the LED lights.

Led Replacement For Metal Halide

First, what IS an LED light? A light-emitting diode (LED) is an electronic light source. LED's are based on the semiconductor diode. When the diode is forward biased (switched on), electrons are able to recombine with holes and energy is released in the form of light. This effect is called electroluminescence and the color of the light is determined by the energy gap of the semiconductor.

LED's present many advantages over traditional light sources including lower energy consumption, longer lifetime, improved robustness, smaller size ( enabling LED's to be easily populated onto printed circuit boards.) and faster switching (LED's light up very quickly. 

A typical red indicator LED will achieve full brightness in microseconds, and LED's used in communications devices can have even faster response times.). Thus their utility value is very high. Maybe the greatest advantage of all is that as the color of the light depends on a specific variable (i.e.- the energy gap of the semiconductor) thus LED's can emit light of an intended color without the use of color filters that traditional lighting methods require. This is more efficient and can lower initial costs for a vast range of applications which previously used the color filtering process.

Led Retrofit Kits


Best LED Lighting Guide - My LED Lighting Guide - ‎(888)‎ 423 - 3191

Further advantages of LED's exist, among them efficiency of an LED is prominent. LED's produce more light per watt than incandescent bulbs, and wastage of energy is minimal, as LED's radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED. Further as light is emitted from a solid state material, greater shock absorption capability is present in the LED lights. Further, LED's do not contain mercury, unlike most fluorescent lamps.

But LED's are currently more expensive, on an initial capital cost basis, than most conventional lighting technologies, and are very much sensitive to temperature and voltage. LED's must be supplied with the voltage above the threshold and a current below the rating. This can involve series resistors or current-regulated power supplies, and the proper function of the power supply is an essential factor in creating maximum utility and longevity of the systems. 

If too much current passes through the semiconductor material forming the Diodes the LED will burn out! LED power supplies must, among others, provide Universal AC input, allowing the full range of applications, Short circuit, over load, over voltage protection, a built-in dimming function, allowing the light levels to be adjusted to create different effects.

Metal Halide Led Replacement

And of course the safety of the LED power supply is a prime concern, to prevent overheating, cooling should take place, and the most efficient form of this is by free air convection. And the power supply must come fully equipped with an isolated, (preferably) plastic case that is resistant to external influences such as water on order to protect it from harmful effects of water and dust.

If you are planning an LED lighting project, for your home, garden or even your office or your shop, a thorough research on the subject may be your best starting point. And as LED's are very sensitive make sure you use an appropriate and high quality power supply. Speak to your local electronic engineer or a reputed seller of LED lights and power supplies for more information. A vast array of online LED and LED power supply vendors exist as well. Their official websites offer high quality information and specifications to tailor a solution for your lighting requirements.


4 Tips to Buy The High Bay LED Lighting Fixtures

Are you going to invest in the High Bay LED lighting fixtures? If so, you may want to make sure that you opt for the products that will satisfy your needs down the road. Most people go for High Bay LED lighting fixtures because of their immense benefits. Primarily, they choose them because of their energy efficiency and lighting consistency. Given below are tips to help you buy the best of them.

Metal Halide Led Retrofit

Evaluate Your needs

The first thing you need to do is evaluate your needs. What do you need? The evaluation will help you know your requirements. Once you have done this, you will find it easier to identify and choose the best products. Don't forget to consider your environment prior to choosing the designs that attract you.

Estimate the efficiency of other systems

There are some other things that you should evaluate. For instance, you may want to evaluate the efficiency of the electrical, thermal and the optical systems first. By doing so you will be able to decide on the number of High Bay LED lighting fixtures that you will need. Buying the right number of each product is necessary so you don't speed too much.

Conduct research online

As you know that this is going to be a long-term investment as spending a lot of money on lighting every year is not feasible for everyone. Therefore, we suggest that you get the contact details of the major suppliers and manufacturers of these products. Make sure you also carry out some research online. These days there are a lot of manufacturers out there who have been competing for market share.

Choosing a good one is hard but not impossible. If you do some research online and go through some websites, you will be able to find the best supplier and manufacturer. All you have to do is make sure that the products that you will buy will be reliable and high quality. This can be ensured only if you make sure that the supplier or manufacturer is trusted.

Installation location

No matter what you want to buy, you want to get the best quality product. The same is the case with High Bay LED lighting fixtures. As far as buying these products is concerned, you need to make sure that the location is good for the installation. This is really important if you want to get the most out of your High Bay LED lighting fixtures. If the location is designed well, the new setup will make the room look bigger for its size. So, if the rooms are well designed, you will find it easier to do with fewer units.

Long story short, if you are going to buy High Bay LED lighting fixtures for your new premises, we suggest that you don't make the buying decision prior to consider the tips given above. Lastly, make sure you get the things installed by a professional to ensure the safety of you as well as the systems. Hopefully, you will be able to get your hands on the best products.

Led Retrofit Kits


Led High Bay Lighting

Contact us today!

My LED Lighting Guide