BendPak Products‎ > ‎

BendPak Lifts XPR-12C

posted Nov 16, 2011, 1:48 PM by Junior A   [ updated Nov 29, 2011, 11:52 AM ]
bendpak lifts, bendpak 2post lifts, auto lifts
When you need to lift something heavy—really heavy—your best bet is always BendPak. Our super-duty models are pure brutish muscle. This XPR-12C, for instance, has an astounding 12,000-lb. capacity and features heavier column construction, carriage construction and frame components than ever before. Like all our clear floor lifts, this lift offers superior direct-drive performance, cutting-edge technology, top of the line materials and design that's ahead of its time. Fits in shops with ceilings higher than 14', and it won't crowd your floor while you work beneath a vehicle.




Features

  • 12,000-lb. lifting capacity
  • Padded overhead safety shutoff bar
  • Extended height top-beam provides greater overhead clearance
  • Single-point safety release
  • Dual direct-drive hydraulic cylinders
  • Dual-synchro equalization system for equal lifting
  • Oversize 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Oversize A36 steel base plates
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 1/2" aircraft-quality equalizer cables
  • Oversize cable sheave diameter reduces cable fatigue
  • Durable, rubber lift pads with stack-able adapters
  • 8-piece truck and van adapter set comes standard
  • Convenient storage is included for truck and van adapters
  • Triple-telescoping arms provide increased range for lifting point access
  • Versatile drop-in contact pads with stack-able adapters

Specifications

  • Lifting capacity*: 12,000 lbs. / 5,443 kg
    • *Max capacity / front axel: 6,000 lbs. / 2,722 kg
    • *Max capacity / rear axel: 6,000 lbs. / 2,722 kg
  • Overall height: 170" / 4,318 mm
  • Overall width (outside of base plate): 155" / 3,937 mm
  • Width (outside of columns): 144" / 3,658 mm
  • Floor to overhead switch: 165” / 4,191 mm
  • Inside columns: 120" / 3,048 mm
  • Front arm min reach: 32" / 813 mm
  • Front arm max reach: 60" / 1,524 mm
  • Rear arm min reach: 32" / 813 mm
  • Rear arm max reach: 60" / 1,524 mm
  • Min pad height: 5" / 127 mm
  • Rise: 69" / 1,753 mm
  • Lift height max (pad only): 74" / 1,880 mm
  • Lift height max (6" adapter): 80" / 2,032 mm
  • Drive-thru clearance: 106" / 2,592 mm
  • Motor: 220 VAC / 60 Hz / 1 Ph
  • Time to full rise: 45 sec
  • Max load per arm: 3,000 lbs. / 1,361 kg
  • Shipping weight: 2,588 lbs. / 1,176 kg
  • Shipping dimensions: 172" x 29" x 54" / 4,369 mm x 737 mm x 1,372 mm

Note:

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

Č
ą
Junior A,
Nov 16, 2011, 1:51 PM
ą
Junior A,
Nov 16, 2011, 1:52 PM
ą
Junior A,
Nov 16, 2011, 1:52 PM
ą
Junior A,
Nov 16, 2011, 1:52 PM
Comments

Advertise Here

BendPak Lifts Distributors