Educational Profile

• Ph.D (Doing)
  • TKM College of Engineering, Kollam
  • APJ Abdul Kalam Technological University
• M.E (2010)
  • Mechanical Engineering - Manufacturing Engineering
  • Anna University
  • First Rank
• B.Tech (2004)
  • Mechanical Production Engineering
  • University of Kerala / TKM College of Engineering
  • First Class

Research Interest

• Manufacturing Engineering
• Composite Materials

Paper Publications

• Arun J , Dr. T G Ansalam Raj , “Optimising The Machining Parameters Of Dry Turning Using Design Of Experiments” ,Marian Journal of Research, Vol. 1, 2015

Conferences

• Kannan, Akash, Arun Joseph, Gireesh and Arun J"Effect of reinforcement on Aluminium to enhance mechanical propertes and tribological behaviour" in NCAEET at Marian Engineering College, Trivandrum
• Sreekanth, Nithin,Rahul, Sivaraj andArun J"Hydrogen Powered Petrol Engine"n NCAEET at Marian Engineering College, Trivandrum
• Arun J and Dr. T G Ansalam Raj “Prediction of Surface roughness using Hybrid Intelligence systems” in the National Conference on Advanced Technologies in Mechanical Engineering at Lord Jegannath College of Engineering and Technology, Kanyakumari Dist., Tamil Nadu.

Projects / Theses Guided

• Crack Detection Vehicle; Aabin Gazal Jose, Calvin George, Abhijith S, MEC, Completed March 2017.
• Bicycle powered compressed air; Akshai K K,Faris A, Akshay K, Hari Krishnan R J, MEC, Completed March 2017.
• Intelligent braking System; Akhil Sreeram, Nidhin,Amal,Haris, Ashiq, MEC, Completed March 2017.
• Automatic sliding door Mechanism; Abhilash,Anwin, Aravind, MEC, Completed March 2012.
• Pressurized recirculating engine cooling with the aid of a pumping system; Athul Joseph , Antony John ,Nikhil Antony, MEC, Completed March 2012.
• Design and construction of metal polishing machine for Metallurgical analysis; Arun P G ,Aravind K N, John Lessly Arnold, Completed March 2012.

Faculty Development Programs Attended

• Attended a five days workshop on “Design and Analysis of Mechanical Systems” conducted by the National Institute of Technology, Tiruchirappalli from 10/6/2019 to 15/6/2019.
• Attended a two day workshop on 'Design of Experiments' conducted by the SRM Institute of Science and Technology, Chennai on 7/2/2019 to 8/2/2019
• Attended "Optimization Techniques and its Engineering Applications " conducted by the Department of Mechanical Engineering, TKM College of Engineering, Kollam from December 31, 2018 to January 05,2019.
• Attended the STTP on Optimization Techniques for Engineering Application organized by Dept of Mechanical Engineering, Mar Baselios College of Engg and Technology, TVM is to be conducted from 17th July to 21th July 2017.
• Attended a workshop on Modeling and Simulation for Automotive DESIGN under Dept. of Mechanical Engineering, GEC Barton Hill, TVM is to be conducted from 29th November to 2nd December 2017
• Attended the course on Solar Energy, conducted by Ministry of Skill Development and Entrepreneurship, Govt. of India on 1st and 2nd October 2016
• Attended FDP: “Essential Mathematics for Engineering” organised by KTU during 29th November –3rd December 2016
• Attended course on BOSCH AUTOMOTIVE JOINT CERTIFICATION PROGRAM organised by Centre for continuing education GEC Barton Hill, TVM from 14th December to 17th December 2016
• Attended a course on Prime Avera Conducted by Synergy at Marian Engineering College from 3rd Jan to 7th Jan 2017
• Short Term Training Programme on Finite Element Method from 13/11/2006 – 07/12/2006 at College of Engineering Trivandrum
• Short Term Training Programme on Trends in Robotics and Automation from 12/5/2008 – 16/05/2008
• Training Programme on Mechatronics Applications from 4/6/2013 & 5/6/2013

Contributions

• ·Resource person for during Faculty Development Program on “Design and Engineering” conducted from 18th to 22nd December 2017, sponsored by APJ Abdul Kalam Technological University and conducted by Department of Mechanical Engineering, College of Engineering Trivandrum.
• A resource person for conducting Faculty Development Program on “Initiating the Thinking Process for Creative Engineering Design” organised under TEQIP-II at College of Engineering Thalassery, from 05-08 January 2016
• A resource person for conducting the Faculty Development Program on “DESIGN AND ENGINEERING” conducted by APJ Abdul Kalam Technological University on 19 March 2016
• A resource person for “Project based Learning” in the State level Short Term Training Programme on Induction Training Programme for Young Teachers conducted at Govt. Engineering College Thrissur during 21-25 November 2016 under Faculty & Staff Development Training Centre sponsored by Directorate of Technical Education, Govt. of Kerala.

Co-curricular Activities

• Coordinator of Marian Centre for Continuing Education 2018-2019
• Coordinator of Marian Centre for Continuing Education 2017-2018

Informative Video Links

• Introduction to Lathe :https://youtu.be/ZSybtG2lQkA
• Introduction to Milling Machine: https://youtu.be/5jYDqCs4mJA
• Introduction to Shaper : https://youtu.be/lMvEkuH85ko

Informative Notes for Subjects

• Design and Engineering - Click here
• Metallurgy Materials Engineering - Click Here
• Machine tools - Click Here

Online Classes

• Manufacturing Technology
  • Module 4 Notes - Click Here
  • Module 4 Recorded session - Click Here