Bespoke Home Offices

Our  offices are all bespoke so we don't have a standard building range, you can design your building from the exterior to the interior using many different range of products.
We have listed a specification which has been popular with this type of product with optoinal sizes and a guide price.
Redwood tongue & Groove Cladding fixed using glue & pins.
2.4m eaves height giving you maximum internal head room.
Double insulated floor first layer of 18mm boarding with 50mm layer of celotex insulation then a internal layer of 18mm moisture resistant chipboard,
100 x 50mm (4x2”) Tanalised pressure treated framework.
Breathable & waterproof lining paper giving your building a vapour barrier.
Insulated using 100mm thick rock wall insulation.
A choice of internal finishing are available.
Internally cladded with 12mm plasterboard and fully plastered walls & ceiling, ready for painting or tongue & groove walls & ceiling.
Internal windows & doors are finished with mouldings & skirting applied
Half glazed joinery made single door with 24mm double glazing.
Three joinery made split single opening windows 1200mm x 1200mm with 24mm double glazing.
Roof is covered with heavy duty slaters felt the finished externally with cedar roof shingles, other roof choices are available i.e. slate, decra roof system.



10 x 10w


16 x 10w


20 x 10w


12 x 12w


14 x 12w


16 x 12w


18 x 12w


20 x 12w


20 x 16w


20 x 20w


This building is a 26 x 14 with the apex roof, built with tanalised 15mm featheredge cladding with 100 x 50mm framing, it has a 15mm tongue and groove floor, roof is O,S,B. boarded.

Doors and windows are  joinery made with double glazing units, Roof was finished with 38kg roofing felt, At this stage the customer requested that there electrician installed lights and sockets.

We then returned to finish the Building, we insulated the walls with 100mm rock wall insulation, then finished with 12mm plasterboard, we then dry lined and sanded ready for painting, Skirting then applied.