WEDGE END TABLE : PAINTING COFFEE TABLES : METAL PATIO DINING TABLE.
Wedge End Table
- The flat peen of a peen and finish hammer, shaped like a wedge
- Present formally for discussion or consideration at a meeting
- Postpone consideration of
- a set of data arranged in rows and columns; "see table 1"
- postpone: hold back to a later time; "let's postpone the exam"
- a piece of furniture having a smooth flat top that is usually supported by one or more vertical legs; "it was a sturdy table"
wedge end table - Wedge End
Wedge End Table by Ashley - Dark Wood (T851-6)
Made with select veneer and hardwood solids. Dark Brown Finish. Cocktail table has a frosted Glass Famous Collectionnsert and casters under the shelf. Famous Collectionped tables have sculptural appearance that can fit Famous Collectionn many Resortces. Dimensions:
Inches: 24W x 27D x 26H37.48 View(List)View Metric: 606.42mm W x 685.8mm D x 663.58mm H More Dimensions: FROM FLOOR TO SHELF 10 7/8 FROM SHELF TO APRON 10 3/4 STATIONARY SHELF 19 3/4 x 23 1/4 x 1 3/8
Some assembly may be required. Please see product details.
Flintstone cafe - tables
0 PHOTOGRAPH PARTICULARS 0 At times the land formations that catch your eye, are out by themselves. Other times, like in this photo, it they appear as a group. The perfectly flat tops of these cap rocks appeared like cafe tables. Right out of a Flintstone cartoon. Wilma, Betty, Barney, & Fred. 0 ACTIVITIES DAY FIVE OF TWELVE 0 After a good night’s rest at Farmington, New Mexico we left at dawn, as was our custom on this trip, with three major destinations in mind: Bisti (pronounced: Biss Tie) badlands; Chaco Canyon; and Bandelier national monument. We had motel rooms reserved at Santa Fe. The hike into the rock and clay formations at Bisti turned out to be my favorite stop on the entire road trip. I had never been there before. We were the only ones there, the weather was bright and clear, and the formations were absolutely amazing. I used my small Garmin etrex to make certain that we would hike to one of the two “good spots” and back out, in the most time efficient manner. There is another good section of Bisti that I know, one day, I will return to visit. Same with the De-Na-Zin area. Always something for another road trip. After Bisti we made our way to Chaco Canyon and visited Chetro Ketl and Pueblo Bonito. I had been to Chaco three times before but never in a situation where I wasn’t rushed for time. Ed and I enjoyed our walks to both ruins and took our time. After Chaco Canyon it was clear (using the ETA on the NUVI navigator), that we weren’t going to make Bandelier with enough light to really enjoy it, so for the first and only time on this road trip, we altered our route solely as a result of “running out of time”. There were several times we altered plans due to weather and dirt (mud) road conditions. So instead of traveling the highways that would lead us to Bandelier from Chaco, we checked the map and took a scenic but more direct highway into Santa Fe (highway 96 instead of highway 4 that would have taken us to Santa Fe via Bandelier). We got into Santa Fe right at dark, in time to check out the historic town square, the cathedral, and get a good meal. The next morning would follow a now established and predictable routine: On each and every day of this road trip, Ed and I would load our gear back in the Jeep right at or just before dawn, always looking forward to the new day’s destinations. The way a road trip should be. 0 3,875 MILE/12 DAY ~ 4 CORNERS ROAD TRIP OVERVIEW 0 At the start of year 2011, I made tentative plans to take a two week solo “road trip” through the Four Corners area (The Colorado Plateau), during the last half of March. Then, if my wife could get the time needed off from her part time job, I also planned a “road trip” vacation to the Southwest, in April with her. When I put the plan together for the March trip, I decided to see if an old friend of mine, Ed (Flickr’s: OldWrangler), might be interested in joining me. I volunteered to take my old four wheel drive pickup truck and split the gasoline expense with him. We would each get an inexpensive motel room on the road to serve as “base camps” to hike, photograph, and explore back roads in the Four Corners area. Not only did Ed accept but he also proposed that we take his brand new 4-door Jeep Wrangler instead of my old pickup truck. That didn’t take any thinking on my part. I LOVE Jeeps and Ed and I have always got along well (decades ago, I worked for him and we had taken a fun road trip together back in 2008, along with my friend John and my youngest son). The deal was sealed. We left my house in Central Washington early Monday morning on the 14th of March. We returned 12 days and 3,875 miles later on Friday evening March 25th. We spent a lot of time drinking Diet Pepsi from the ice chest and keeping the hits of the 60s (and occasionally the 70s), cranked up high on the Jeep’s Sirius satellite radio sound system. Sing along music! “Road trip” tunes. Weather often dictated changes to our proposed route and activities. We stayed flexible, and in the end we visited the large majority of places we had hoped to see, when the road trip began. We had sun and clear skies, snow, dust storms, and high winds at times. Ed’s Jeep had an outside temperature display. We drove in everything from18 degree weather to temperatures in the 70s in New Mexico. Here in outline form are the places we saw, hiked, photographed, and visited during the 12 day road trip: Mon 3.14.11 * Interstate travel from my house in Central Washington to Lehi, Utah Tue 3.15.11 * Scenic back roads ( Hwys: 6, 89, & 31) from Spanish Fork to Huntington, Utah * Dirt road travel to “The Wedge” and down Buckhorn Wash to I-70. * Side trip to the Head of Sinbad petroglyph and then on to Moab. Wed 3.16.11 * Island in the Sky district of Canyonlands NP (Mesa Arch & Upheaval Dome) * The Shafer “Jeep” Trail down to the White Rim road and back to Moab. * Hike to Delicate Arch & visit Windows section in Arches NP. Thu 3.17.11 * Newspaper Roc
630 - bob davoli table in process of plugging holes
So, when we started putting the table together we discovered it only worked out if we left 1/4" holes between the pie pieces, rather than having them flush. Steve and I (most likely me) made some sort of error in either judgement or calculation of the offsets for our template cuts. That is - the router bit isn't a laser, it eats away some amount of material in addition to just cutting along the line. Somehow, we set things up wrong and it ended up eating away too much material on the sides, and so things didn't fit together. After consultation with Neal, we decided to assemble the thing with the holes, wait until the glue was well-set, and then tap little wedge-shaped plugs into each hole. Steve made the plugs and I tapped 'em and it only took about an hour and a half. However, this greatly increased the amount of finishing work for Steve the next day - before he could even begin sanding out all the other imperfections in the surface, he had to saw off all these protruding plugs and sand them smooth. In the end, the thing looked beautiful, and while the plugs are visible, they don't distract.