CNC

CNC adalah produk yang di buat dengan menggunakan teknologi

3 AXIS CNC 4 HEAD

posted May 17, 2012, 9:35 PM by suyono indra




※Standard components :
1.Precision ballscrews, guide rail, block : Germany(Rexroth, Bosch Group)
Z-Axis: Precision ballscrews (Germany)
2.Frequency inverter : Sanken, Japan
3.Z-axis electric brake : Shinko, Japan
4.Vacuum pump : Becker, Germany
5.Spindle: HSD, Italy

3 AXIS CNC 2 HEAD WITH TOOL CHANGER

posted May 17, 2012, 9:30 PM by suyono indra




※Standard components :
1.Precision ballscrews, guide rail, block : Germany(Rexroth, Bosch Group)
Z-Axis: Precision ballscrews (Germany)
2.Frequency inverter : Sanken, Japan
3.Z-axis electric brake : Shinko, Japan
4.Vacuum pump : Becker, Germany
5.Spindle: HSD, Italy

5 AXIS CNC WITH TOOL CHANGER

posted May 10, 2012, 5:13 PM by suyono indra   [ updated May 17, 2012, 7:57 PM ]



ITEM DESCRIPTION CNC-5AXIS-ATC
SPINDLE No. of Spindles 1
Speed

2,000 ~ 22,000 r.p.m.

Spindle Lub. Grease & Cooling Water
TABLE SIZE 4’×8’ 4’×8’
AXES TRAVEL Horizontal (X-Axis) 1320mm
Longitudinal (Y-Axis) 2540mm
Vertical (Z-Axis) 700mm
C-Axis +/-213 degrees
A-Axis +/-120 degrees
MAX. FEED SPEED X, Y Axes 32 M/min.
Z Axis 9 M/min.
A axis 82.50/Sec
C axis 740/Sec
TOOLS Tool Holder Type ISO-30
No. of Tools Per Spindle 12
MOTOR Spindle 15KW×1
Vacuum Pump 7.5HP×1
VACUUM PUMP Capacity

50HZ : 250M3/H,
60HZ : 300M3/H

AIR PRESSURE   6 kg/cm2
DIMENSIONS Floor Space Required (mm) 5100×4100
Height (mm) 3650
Weight (kgs) 9000
CNC SYSTEM Fanuc Fanuc 18i-MB5

※Standard components :
  1. Precision ballscrews, guide rail, block : Germany(Rexroth, Bosch Group) Z-Axis: Precision ballscrews (Germany)
  2. Frequency inverter : Sanken, Japan
  3. Z-axis electric brake : Shinko, Japan
  4. Vacuum pump : Becker, Germany
  5. Spindle: HSD, Italy




1-3 of 3