STARTING A CENTRIFUGAL PUMP : CENTRIFUGAL PUMP

STARTING A CENTRIFUGAL PUMP : LUCAS DIESEL FUEL PUMP : BOSCH VP37 FUEL INJECTION PUMP.

Starting A Centrifugal Pump


starting a centrifugal pump
    centrifugal pump
  • a pump that use centrifugal force to discharge fluid into a pipe
  • A centrifugal pump is a rotodynamic pump that uses a rotating impeller to increase the pressure of a fluid. Centrifugal pumps are commonly used to move liquids through a piping system.
  • A pump that uses an impeller to move water or other fluids
  • (CENTRIFUGAL PUMPS) Centrifugal pumps are able to provide uni-ventricular or bi-ventricular support to the ventricles. Blood is removed from the left or right atrium and returned to the aorta or pulmonary artery, respectively, therefore surgery is required to place the device.
    starting
  • Use a particular point, action, or circumstance as an opening for a course of action
  • appropriate to the beginning or start of an event; "the starting point"; "hands in the starting position"
  • Embark on a continuing action or a new venture
  • start: a turn to be a starter (in a game at the beginning); "he got his start because one of the regular pitchers was in the hospital"; "his starting meant that the coach thought he was one of their best linemen"
  • Come into being; begin or be reckoned from a particular point in time or space
  • (especially of eyes) bulging or protruding as with fear; "with eyes starting from their sockets"

Being swallowed by lush green
Being swallowed by lush green
UBL WDG-4 duo about to enter a tunnel... New dedicated goods diesel locos. These are GM's GT46MAC models. First units were imported in 1999 (13 fully built, 8 in kit form). Now [4/02] DLW has begun local production; 3 have been built and a further 25 or so were built in 2002. As of [1/06] 60+ units have been built.The locos are rated at 4000hp and use 3-phase AC traction motors. They can start a load of 58 BOXN wagons on a 1 in 150 grade and have a balancing speed of 85km/h for such a load on level track. Max. speed is 100km/h. They can be MU'd with up to 4 units operating in tandem. Gear ratio 85:16. Axle load 21 tonnes. They have an evaporation-bath-cooled converter system, and the Siemens SIBAS 16 traction control system. The locos also have slip-control mechanisms. # Builders: GM, DLW # Engine: GM-EMD 16-710 G3B, 4000hp, with EMD 'G' turbocharger. WW PGR governor. Unit fuel injection, centrifugal pump as with WDP-2, cooling and fan as in WDP-2. # Transmission: Electric with TA-17-CA6A alternator, 900rpm, 2200V AC / 3000V DC, 1600A AC, 2100A DC. # Wheelsets: Co-Co bogies # Starting TE:55t at 41% adhesion. # Length over buffer beams: 19964mm # Distance between bogies: 13888mm # Weight: 128t # Fuel tank capacity: 6000l
Don't start up
Don't start up
Het Pomphuis werd gebouwd en sinds 1920 gebruikt om droogdok n° 7 leeg te pompen, zodat een schip onderhouden, geladen en gelost kon worden. In de 7 meter diepe put staan 3 reusachtige gietijzeren installaties; de centrifugale pompen pompten in 2 uur het droogdok leeg. Het gebouw zelf heeft art-nouveau elementen. De activiteiten van het Pomphuis stopten (het droogdok verdween wegens een verbreding van het Albertkanaal) in 1982 en men wilde het Pomphuis in 1996 afbreken, maar in 2002 kreeg het Pomphuis een nieuwe bestemming als restaurant. The Pump House had been built and since 1920 used to drain dry dock n° 7, so that a ship could be maintained, unloaded and loaded. In the 7 meters deep well stood 3 giant cast-iron installations; the centrifugal pumps drained the dry dock in 2 hours . The building himself has art-nouveau elements. The activities of the Pump House stopped (the dry dock disappeared because of a broadening of the Albertkanaal) in 1982 and they wanted demolish the pump house in 1996, but in 2002 the pump house got a new destination as a restaurant.

starting a centrifugal pump
Comments