ADJUST WHEEL BEARINGS. WHEEL BEARINGS

ADJUST WHEEL BEARINGS. STEEL WHEEL REFURBISHMENT. TOWING A 5TH WHEEL TRAILER

Adjust Wheel Bearings


adjust wheel bearings
    wheel bearings
  • The assemblies that permit smooth rotation between the wheel hub and spindle.
    adjust
  • Permit small alterations or movements so as to allow a desired fit, appearance, or result to be achieved
  • Alter or move (something) slightly in order to achieve the desired fit, appearance, or result
  • adapt or conform oneself to new or different conditions; "We must adjust to the bad economic situation"
  • Adapt or become used to a new situation
  • alter or regulate so as to achieve accuracy or conform to a standard; "Adjust the clock, please"; "correct the alignment of the front wheels"
  • align: place in a line or arrange so as to be parallel or straight; "align the car with the curb"; "align the sheets of paper on the table"
adjust wheel bearings - Rikon 10-325
Rikon 10-325 14-Inch Deluxe Band Saw
Rikon 10-325 14-Inch Deluxe Band Saw
Rikon Model 10-325 features two speeds (1445 and 2950 ft/min), a 13-inch resaw capacity and a powerful 1-1/2 HP 110/220V motor. Blade tracking and tension windows add safety while aligning your blade. Changing the blades (accepts 1/8-inch to 3/4-inch widths) is easy with a hinged blade guard that provides 2 inches of access; there's no twisting to install or remove blades. Quick release blade tension is designed to operate horizontally adding to the ease of use of this band saw. The 16-inch x 20-1/2-inch cast iron table is supported by a one-piece trunnion system. Hinged steel doors make access to the cast iron wheels easy and the tool holder keeps your tools accessible. The enclosed cabinet is accessible for storage of extra blades and jigs. Includes: micro adjustable blade guide bearings, work light, heavy-duty fence with resaw bar, and 4-inch dust port. Shipping weight is 261 lbs.

Designed to give you options for cutting wood and non-ferrous materials, the award-winning RIKON 10-325 14-Inch Deluxe Bandsaw offers a large, cast iron work table, ball-bearing blade guides, and a powerful 1-1/2-horsepower motor with two speeds. With convenient features such as quick release blade tension, dust ports, and viewing windows to help with adjustments, this precision bandsaw also includes a heavy-duty rip fence with re-saw bar.
callout box top


10-325
14-Inch Deluxe Bandsaw
At a Glance:
Two speeds offer a variety of cutting applications


Large work table tilts and locks into place


Edge-facing thrust bearings extend blade and bearing life and improve stability


Heavy-duty rip fence includes re-saw bar


13-inch re-saw capacity


Two-year limited warranty


callout box bottom

RIKON 10-325 14-Inch Deluxe Bandsaw

13-inch capacity allows for easy re-sawing of a variety of materials. View larger.
RIKON 10-325 14-Inch Deluxe Bandsaw
Large work table has tilt-and-lock capability and work light. View larger.
Straight Cut
Balanced 14-inch bandsaw and sturdy rip fence for accurate cuts. View larger.
Designed for Smooth, Uniform, Stable Performance
The RIKON 14-Inch Deluxe Bandsaw is driven by a 1-1/2-horsepower, 110/220-volt motor that functions smoothly and powerfully. And with a 13-inch re-saw capacity, it can easily re-saw slicing veneers, book-matched projects, and lumber sizing. Precision-balanced, solid cast iron wheels give the blade uniform operation, and the edge-facing thrust bearings also help to extend blade and bearing life while improving the stability of the blade during cutting.
Two Speeds for Different Cutting Applications
With a 13-inch cutting capacity and two speed settings, the RIKON 14-Inch Deluxe Bandsaw can be used for a variety of applications. The 1,445-feet/minute setting is ideal for hardwoods, some plastics, and non-ferrous metals, while the 2,950-feet/minute setting can be used for other woodworking applications.
Convenient Features Increase Functionality
A large, 16-inch by 21-1/2-inch table provides plenty of additional work space during woodcutting operations. You can also easily tilt and lock the table into place with the solid cast table trunnion. A convenient tool storage cabinet at the bottom of the unit gives you a place to keep extra blades, jigs, or other tools.
Heavy Duty, Adjustable Rip Fence
An included rip fence can be mounted on either the right or left side of the blade, and a re-saw bar can be attached to help correct any blade wandering during re-sawing. You can easily correct the fence for blade drift by turning the adjustment collars and fence bolts.
Quick-Release Blades and Viewing Windows for Easy Adjustments
It's easy to assemble, operate, and adjust the RIKON 14-Inch Deluxe Bandsaw with the helpful manual, blade selection guide, and wheel adjustment tip sheet. Inset windows allow you to check the centering of the blade as well as the tension of the blade, so you can keep your operation running smoothly and accurately. You can also quickly release blade tension when changing blades or when the machine is off to help increase the life of the blade.
Dust Port Keeps Work Area Clean
The 4-inch dust port helps you keep dust out of the air when you attach your dust collection system to the port opening.
The RIKON 10-325 14-Inch Deluxe Bandsaw is backed by a manufacturer's two-year limited warranty.
What's in the Box
RIKON 10-325 14-Inch Deluxe Bandsaw, work table, base cabinet, rip fence, tool holder, work light, owner's manual, and parts for assembly.

Angle Cut
Make exacting cuts in hardwoods, plastics, non-ferrous metals, and more.

76% (10)
Plymouth with Floating Power and Free Wheeling, 1931 - Promotional Brochure (inner fold)
Plymouth with Floating Power and Free Wheeling, 1931 - Promotional Brochure (inner fold)
PLYMOUTH with FLOATING POWER and FREE WHEELING SPECIFICATIONS AXLE, Rear -- Semi-floating, pressed-steel housing. Drive gear and pinion, spiral bevel type. Gear ratio, 4.33 to 1. Axle shaft: forging of high-alloy chrome-nickel steel, heat-treated, 1 3/8" diameter at outer bearing end. AXLE, Front -- Heat-treated, I-section drop forging. Adjustable tapered roller wheel bearings. Ball thrust bearings at steering knuckle head. BODIES -- "Safety-Steel." Specially designed for strength and quietness. BRAKES, Service -- Plymouth 4-wheel hydraulic, internal-expanding, weather-proof. Centrifuse drums, 11" inside diameter; brake facing, 1 1/2" wide. BRAKES, Parking -- External-contracting on drum mounted at rear of transmission. Drum, 6" diameter; brake band, 2" wide. CARBURETOR -- Plain-tube type with single adjustment for idle speed. Equipped with acceleration pump, air cleaner and intake silencer. CLUTCH -- Single dry-plate type with twin discs. Spring center driven disc 8 7/8" in diameter with asbestos composition fabric facing riveted to each side. COOLING SYSTEM -- Pump circulated. Water capacity, 3 1/2 gallons (3.02 imperial gallons; 13.72 liters). Extra large water areas in cylinder block for efficient cooling. Cellular radiator with detachable shell. 4-blade 16" fan driven by V belt. Quickly adjustable to take up wear of belt. Temperature indicator on instrument panel. ENGINE -- L-head type, water-cooled. Bore, 3 5/8"; stroke, 4 3/4"; S. A. E. horsepower, 21.03; developed horsepower, 56; piston displacement, 196 cu. in. Full force-feed lubrication to all crankshaft, camshaft, connecting rod bearings and timing gears. Positive spray from metered hole in connecting rod lubricates cylinders and valve mechanism. Oil capacity, six quarts (5.667 liters). Three-bearing crankshaft. Aluminum alloy pistons. Crankcase ventilation with air cleaner. Two-point suspension in rubber for Floating Power. ELECTRICAL SYSTEM -- Single-wire system. Generator: third-brush regulation, six-volt type. Starting motor: six-volt type, mechanically engaged before revolving. Battery: six-volt, 84-ampere-hour capacity. Ignition: top outlet waterproof distributor and coil; full automatic mechanical spark advance and vacuum controlled spark retard at idle speeds. FRAME -- Drop center, pressed steel, wide flange. Channel, 5 1/2" deep. Flanges, 2 1/8" wide at center section. Four cross members. FUEL SYSTEM -- Fuel drawn from supply tank by fuel pump, mounted on right side of engine, driven from camshaft. Fuel filter. Fuel tank mounted at rear of frame; capacity, 12 gallons (10 imperial gallons; 43.4 liters). OVER-ALL LENGTH - With bumpers, 170 inches. SPRINGS -- Semi-elliptic. Front: length, 35 1/2"; width, 1 3/4". Rear: length, 53 1/2"; width, 1 3/4". Self-adjusting shackles. STEERING GEAR -- semi-irreversible, worm-and-sector type. Adjustable for wear. Steering arm, drop forging, heat-treated. Three-spoke thin grip wheel, 17" diameter. TRANSMISSION -- Easy-Shift constant-mesh, three-speed selective sliding-gear type. Unit with engine. All gears are chrome-vanadium steel. FREE WHEELING -- In all forward speeds, cam-and-roller type -- controlled by button on instrument board. WHEELS -- Five wire wheels, spare mounted rear.; or artillery type wood wheels with spare rim. Balloon cord nonskid tires, 4.75/19. INSTRUMENTS and EQUIPMENT -- Hydraulic shock absorbers on all springs. Instrument panel includes speedometer, ammeter, oil pressure gauge, electrical gasoline gauge, temperature indicator, ignition switch, choke and throttle control buttons, free wheeling control -- all indirectly lighted. Horn button, light control, at center of steering wheel. Equipment includes automatic windshield cleaner, rear-vision mirror, magnetic horn, stoplight, full set of tools on all models. NOTE -- All specifications subject to change without notice. Promotional Brochure Date: 1931 Form P-15
Plymouth, Chrysler Motors Product, with Floating Power and Free Wheeling, 1931 - Promotional Sales Brochure [Page 12]
Plymouth, Chrysler Motors Product, with Floating Power and Free Wheeling, 1931 - Promotional Sales Brochure [Page 12]
SPECIFICATIONS AXLE, Rear -- Semi-floating, pressed-steel housing. Drive gear and pinion, spiral bevel type. Gear ratio, 4.33 to 1. Axle shaft: forging of high-alloy chrome-nickel steel, heat-treated, 1 3/4" diameter at outer bearing end. AXLE, Front -- Heat-treated, I-section drop forging. Adjustable tapered roller wheel bearings. Ball thrust bearings at steering knuckle head. BODIES -- "Safety-Steel." Specially designed for strength and quietness. BRAKES, Service -- Plymouth 4-wheel hydraulic, internal-expanding, weather-proof. Centrifuse drums, 11" inside diameter; brake facing, 1 1/2" wide. BRAKES, Parking -- External-contracting on drum mounted at rear of transmission. Drum, 6" diameter; brake band, 2" wide. CARBURETOR -- Plain-tube type with single adjustment for idle speed. Equipped with acceleration pump, air cleaner and intake silencer. CLUTCH -- Single dry-plate type. Spring center driven disc 8 7/8" in diameter with asbestos composition fabric facing riveted to each side of disc. COOLING SYSTEM -- Pump circulated. Water capacity, 3 gallons. Extra large water areas in cylinder block for efficient cooling. Cellular radiator with detachable shell. 4-blade 16" fan driven by V belt. Quickly adjustable to take up wear of belt. Temperature indicator on instrument panel. ENGINE -- L-head type, water-cooled. Bore, 3 5/8"; stroke, 4 3/4"; S. A. E. horsepower, 21.03; developed horsepower, 56; piston displacement, 196 cu. in. Full force-feed lubrication to all crankshaft, camshaft, connecting rod bearings and timing gears. Positive spray from metered hole in connecting rod lubricates cylinders and valve mechanism. Oil capacity, 4.6 quarts. Three-bearing crankshaft. Aluminum alloy pistons. Crankcase ventilation with air cleaner. Two-point suspension in rubber for Floating Power. ELECTRICAL SYSTEM -- Single-wire system. Generator: third-brush regulation, six-volt type. Starting motor: six-volt type, mechanically engaged before revolving. Battery: six-volt, 84-ampere-hour capacity. Ignition: top outlet waterproof distributor and coil; full automatic mechanical spark advance and vacuum controlled spark retard at idle speeds. FRAME -- Drop center, pressed steel, wide flange. Channel, 5 1/2" deep. Flanges, 2 1/8" wide at center section. Four cross members. FUEL SYSTEM -- Fuel drawn from supply tank by fuel pump, mounted on right side of engine, driven from camshaft. Fuel filter. Fuel tank mounted at rear of frame; capacity, 9.6 gallons. OVER-ALL LENGTH - With bumpers, 170". SPRINGS -- Semi-elliptic. Front: length, 35 1/2"; width, 1 3/4". Rear: length, 53 1/2"; width, 1 3/4". Self-adjusting shackles. STEERING GEAR -- semi-irreversible, worm-and-sector type. Adjustable for wear. Steering arm, drop forging, heat-treated. Three-spoke thin grip wheel, 17" diameter. TRANSMISSION -- Easy-Shift constant-mesh, three-speed selective sliding-gear type. Unit with engine. All gears are chrome-vanadium steel. FREE WHEELING -- In all forward speeds, cam-and-roller type -- controlled by button on instrument board. WHEELS -- Five wire wheels, spare mounted rear. Balloon cord nonskid tires, 4.75/19. INSTRUMENTS AND EQUIPMENT -- Hydraulic shock absorbers on all springs. Instrument panel includes speedometer, ammeter, oil pressure gauge, electrical gasoline gauge, temperature indicator, ignition switch, choke and throttle control buttons, free wheeling control -- all indirectly lighted. Horn button, light control, at center of steering wheel. Equipment includes automatic windshield cleaner, rear-vision mirror, magnetic horn, stoplight, full set of tools on all models. NOTE -- All specifications subject to change without notice. Promotional Brochure Date: 1931 Printed in Canada [no form number]

adjust wheel bearings