Curriculum Vitae
Associate Professor Dr. Abdul Rahim Bin Abdullah
Manager (CoE-CeRIA)
Center for Robotics and Industrial Automation (CeRIA)
Faculty of Electrical Engineering (FKE)
(Certified Energy Manager, CEM-MY-1107-0417 ) 

______________________________________________________________________________________________________________________
MAIN AREAS OF RESEARCH
Advanced Digital Signal Processing for Power Quality, Rehabilitation Engineering, Assistive Technology and Power Electronics and Drives.
______________________________________________________________________________________________________________________
LIST OF INTELLECTUAL PROPERTY

        1) Electromyography (EMG) Monitoring System  – LY2016000103 (2016)
        2) High Voltage Insulation Surface Condition Monitoring System   – LY2016000862 (2016)
        3) Power Quality Monitoring System (PQMS)  – LY2016000863 (2016)
        4) Harmonic Source Identification System (HSIS) – LY2016000864 (2016)
        5) Low Cost Product Quality Inspection System - CRLY 00003729 (2016)
        6) Smart Data Extraction System - CRLY 00003728 (2016)
______________________________________________________________________________________________________________________
LIST OF AWARDS
  1. ANUGERAH AKADEMIK UNIVERSITI (PENYELIDIKAN) 2014
  2. ANUGERAH AKADEMIK UNIVERSITI (PENYELIDIKAN) 2012
  3. ANUGERAH KHAS UNIVERSITI 2012
  4. ANUGERAH PEKERJA CEMERLANG 2015
  5. ANUGERAH PEKERJA CEMERLANG 2012
  6. ANUGERAH PEKERJA CEMERLANG 2006
  7.  I-ENVEX 2016 --  3 Gold 2 Silver Medals
  8.  UTeMEX 2016 - 2 Silver Medals
  9.  INOTEK 2016 - 1 Gold 1 Bronze Medals 
  10.  I-ENVEX 2015 – 3 Gold, 2 Silver Medals
  11. UTEMEX 2015 – 1 Gold, 1 Silver medals
  12.  INNOFEST 2014 – 1 Special Award, 5 Gold, 1 Silver Medals
  13. I-ENVEX 2014 – 1 Special Award, 2 Gold, 2 Silver, 1 Bronze Medals
  14.  I-ENVEX 2013 – 1 Special Award, 2 Gold, 1 Bronze medals
  15. PECIPTA 2013 – 1 Gold, 2 Silver medals
  16.  ITEX 2013- 1 Silver, 1 Bronze Medals
  17. UTEMEX 2013 – 2 Silver medals
  18. UTEMEX 2012 – 3 Gold, 3 Silver, 6 Bronze medals
  19. ITEX 2012 – 2 Silver medals
  20. I-ENVEX 2012 -  2 Bronze Medals.
  21. Proton Green Mobility Challenge 2012 (PGMC 2012): 2nd Runner-Up, Winner Best Research & Development,  Winner V-Max, Winner Sponsorship & Marketing/Website
  22. Best Paper Award of The 2017 IAENG International Conference on Imaging Engineering "Automated Stroke Lesion Detection and Diagnosis System".
  23. Certified of Merit for The 2017 IAENG International Conference on Imaging Engineering "Quadratic Distance and Level Classifier for Product Quality Inspection System".
  24. Best Paper Award of The 2017 11th International Power Engineering & Optimization Conference (PEOCO 2017) "Real-Time LCD Digit Recognition System".
  25. Best Paper Award of The 2012 IAENG International Conference on Imaging Engineering "Fully Automated Region Growing Segmentation of Brain Lesion in Diffusion-weighted MRI"
______________________________________________________________________________________________________________________
SUPERVISION

 Name Title Matrix No. PhD/Master Status
 Mustafa Bin Manap Voltage Source Inverter Switches Faults Classification and Identification System
  M011210014 
(Main Supervisor)
  Master (Research) Completed 
 Nurbahirah Binti Norddin Time-Frequency Analysis Technique for Determination of High Voltage Insulation Material Surface Condition
 M011110005
(Main Supervisor)
 Master (Research) Completed
 Nur Qamarina Binti Zainal Abidin Insulator Surface Condition Monitoring System For Leakage Current Analysis
 M011110011
(Main Supervisor)
 Master (Research) Completed
Azhar Bin Sulaiman Performance Analysis in Material Selection for Surface Insulation Condition of High Voltage Application
 M011120006
(Main Supervisor)
Master (Mixmode)  Completed
 Nur Hafizah Tul HudaPower Quality Signals Detection and Classification using Time-Frequency Distributions 
 M0111200006
(Main Supervisor)
  Master (Research) Completed
 Nur Sumayyah Binti Ahmad Real Time Monitoring System of 3 Phase Voltage Source Inverter (VSI) for Electrical Drive Application
 M011210022
(Main Supervisor)
Master (Research)
Completed

  Tengku Nor Shuhada Binti Tengku ZawawiElectromyography  (EMG) Signal Analysis of Manual Lifting using Time-Frequency Distribution 
 M011220003
(Main Supervisor)
  Master (Research) Completed
  Rizanaliah Binti Kasim Network Communication Over Power Line in Low Voltage Direct Current for DC Microgrid
 M011220004
(Main Supervisor) 
Master (Research)  Completed 
 Noor Athira Binti AbidullahReal-Time Power Quality Signal Detection and Classification System 
 M011310007
(Main Supervisor) 
 Master (Research) Completed
 Muhammad Zuhaili Bin RazaliAnalysis of Nominal Stack Efficiency Towards Thermodynamic Potential in Proton Exchange Membrance (PEM) Fuel Cell 
 M011320003
(Main Supervisor) 
 Master (Research) Completed
Nabilah Binti Mat Kassim Harmonic Source Indentication System using Time-frequency Analysis Technique 
 M01140018
(Co-supervisor)
 Master (Research) On – going
 Muhammad Sufyan Safwan Bin Mohd Basir A New Time-Frequency Distribution for Real-Time Batteries Parameters Estimation System
M011510013 
(Main Supervisor) 
 Master (Research) On – going
 Mohamad Radzi Bin Mohamad RidzuanA Environmentally Energy Dispatch With New Optimazation Method 
 M011510014
(Co-supervisor)
  Master (Research) On – going
 Mohd Faiz Bin Habban Fault Detection and Classification system of Converter for EV Application
  M011610011
(Main Supervisor) 
 Master (Research)  On – going
  Nor Shahirah Binti Mohd Nor A New Technique for Multimodal Brain Image Segmentation for Computer Aided Diagnosis 
  M021610012
(Co-supervisor)
 Master (Research) On – going 
  Nor Nabilah Syazana Binti Abdul RahmanAutomatic Vision-Based Defect Detection of Products Quality Inspection and Monitoring System for IKS 
  M021610013
(Co-supervisor)
  Master (ResearchOn – going  
 Muhammad Amir Usamah Bin Che Mood Health Screening Test System for Socail Security Organization (SOCSO) Programme
 M021620007
(Co-supervisor)
 Master (Research On – going  
 Zaiton Binti Mohd Sharif Characterization of Wireless Channel using Time-frequency Representations
 2012664436 
(EE999(UiTM) 
(Co-supervisor)
 PhD (Research) Completed 
 Mohd Hatta Bin JopriA New Time-Frequency Analysis for Harmonic Signal Source Detection, Identification And Diagnosis System
 P011410002
(Main Supervisor) 
 PhD (Research) On – going
 Tengku Nor Shuhada Binti Tengku ZawawiMuscularskeletal Disorder Electromygraphy Signal Analysis for Health Screening Test System
P011620005
(Main Supervisor) 
 PhD (Research) On – going 
Ng Lip Tat  Effectiveness Analysis of IDDQ Test Method in Screening Out Device Under Test
 P011110001
(Co-supervisor)
PhD (Research) On – going 

_____________________________________________________________________________________________________________________
RESEARCH PROJECT

Year 2017:
  1. A New Time-Frequency Distribution Of Electromyography (Emg) Pattern Recognition For Repetitive Core Lifting Task, Co-Researcher, PJP/2017/FKEKK/HI9/S01526, RM 40 000, 1 May 2017 - 31 Oct. 2018.
  2. A New Compact Microwave Spatial Power Combiner Design By Using Vivaldi Structure Technique For Wideband Applications, Co-Researcher, PJP/2017/FKEKK/HI13/S01540, RM 28 000, 1 May 2017 - 31 Oct. 2018.
  3. A New Class Of Metasurface Structure For Circular Polarized Antenna Performance Enhancement, Co-Researcher,  PJP/2017/FKEKK/HI13/S01541, RM 28 000, 1 May 2017 - 31 Oct. 2018.
  4. Adaptive Brain-Computer-Interface (BCI) for Quadriplegic Assistive Machine Using Deep Reinforcement Learning, Co-Researcher,  PJP/2017/CeRIA-FKE/S01557, RM 20 000, 1 Jun 2017 - 31 Nov. 2018.

Year 2016:
  1. Automatic Vision-Based Defect Detection of Products Quality Inspection and Monitoring System for Small and Medium Industries (SME), Principle Researcher, Gluar/STEVIA/2016/FKE-CeRIA/I00009,  RM 100 000, 3 Oct. 2016 - 2 Oct 2018
  2. Automated Detection For Indentifying And Quantifying The Extend Of Strokes From Multispectral Neuroimaging, Co-Researcher,
  3.  PJP/2016/UPM/FKEKK-CERIA/S01490, RM 12 000, 1 Nov 2016 - 31 Oct 2017.

Year 2015:
  1.  Characterisation of biomechanical properties of articular cartilage using low-field magnetic resonance imaging (MRI) image, Co-Researcher, FRGS/1/2015/TK05/UTEM/02/1,  RM 98700, 1 Nov. 2015 - 31 Oct 2017
  2.  Numerical Analysis Of The Efficiency Of Lithium Ion Battery During Discharge Using Method Of Lines Technique, Co-Researcher, FRGS/1/2015/SG04/UTEM/02/2, RM 90200,  1 Nov. 2015 - 31 Oct 2017
  3. A New Image Analysis Technique of Finger-vein Biometrics for Individual Identity Recognition System, Co-Researcher, FRGS/1/2015/TK04/UTEM/02/16, RM86352, 1 Nov. 2015 - 31 Oct 2017
  4. A New Time-Frequency Technique of Charging and Discharging Signal Analysis for Battery Parameters Identification System, Co-Researcher, RAGS/1/2015/TK0/FKE/03/B00091, RM 74750, 1 Dec. 2015 - 30 Nov 2017
  5. An Industry Standard Compliant Aircraft Identification and Tracking (ADAT) System to Enhance Air Navigation Safety, Co-Researcher, 01-01-06-SF1396, RM 242 600, 1 April 2015 - 30 March 2017
  6. Optimum Var Resources For Maximum Loadability Enhancement Using New Optimization Algorithm, Co-Researcher, RAGS/1/2015/TK0/FKE/03/B00094, RM 68 000, 1 Dec. 2015 - 30 Nov 2017
  7. A New EMG Classification Scheme of Highly Dimensional Features Vector for Dexterous Hand Prosthesis Control, Co-Researcher, PJP/2015/FKE(11A)/S01449, RM 14 764, 1 Dec. 2015 - 30 Nov 2017.
Year 2014:
  1. A new Time-Frequency Analysis Technique for Power Quality Disturbances Classification and Diagnostic, Principle Researcher, 06-01-14-SF0019, Principle Researcher, RM 267 500, 1 Nov. 2014 - 31 April 2017
  2. A New Leakage Current Analysis Technique For Insulating Materials Surface Condition Classification, Principle Researcher,  FRGS(RACE)/2013/FKE/TK3/2/F00201, RM 50 000, 1 Feb 14 - 31 Jan 2016
  3. Investigation of Priority Fitness Scheme in Robust Control Strategy for Underactuated Gantry Crane System, Co-Researcher, FRGS/1/2014/TK03/UTEM/03/F00213, RM 114 400, 1 July 2014 – 30 Jun 2016
  4. A new Harmonic Signal Analysis Technique for Automated Source Detection and Identification System, Co-Researcher, RAGS/2014/TK03/FKE/B00050, RM 56 400, 1 Dec 2014 – 30 Nov 2016
  5. A new Algorithm of Time-Frequency Analysis Technique for 3-phase Voltage Source Inverter Faults Detection System, Co-Researcher, RAGS/2014/TK03/FKE/B00048, RM 51 000 , 1 Dec 2014 – 30 Nov 2016
  6. Electromyography Signal Analysis based on Time Frequency Distribution for Manual Lifting in Industrial Application, Co-Researcher, PJP/2014/FKE(14D)/S01353, RM 21 000, 1 Aug 2014 – 31 Jan 2016
  7. A New Time-Frequency Analysis Technique for Automated Power Quality Diagnosis System, Co-Researcher, PJP/2014/FKE(17C)/S01365, RM 11 300, 1 Aug 2014 – 31 Jan 2016
  8. Design And Development Of Hot And Cold Air System Using Seebeck Effect For Portable O-Ref (Oven & Refrigerator) Application, Co-Researcher, PJP/2014/FTK(1B)/S01297, RM 20 000, 1 Aug 2014 – 31 Jan 2016
  9. Prototype Development Of Online Surface Condition Monitoring System Using Leakage Current Analysis Technique For High Voltage Insulators, Co-Researcher, PJP/2014/FKE/PROTOTAIP/S01385, RM 20 000, 15 Dec 2014 – 14 Dec 2015

Year 2013:
  1. Online Surface Condition Monitoring System using a New Leakage Current Analysis Technique for High Voltage Insulators, Principle Researcher, ERGS/1/2013/TK02/UTEM/02/02/E00023, RM 126 000, 1 Jun 2013 – 31 Mei 2015
  2. Independent Control Scheme for Sub-Bearing Permanent Magnet AC Motor Drive, Co-Researcher, FRGS/2/2013/FKE/TK02/02/F000168, RM 74 100, 16 Dec 2013 – 15 Dec 2015
  3. Innovating electrification of the automotive industry, Co-Researcher, GLUAR/2013/FKE(1)/I00001, RM 40 000, Jan 2013 - Dec 2015
  4. High Performance of Voltage Source Inverter Faults Detection System using Joint Time-Frequency Analysis Technique for Induction Motor, Co-Researcher, ERGS/2013/FKE/TK02/UTEM/03/02/E00025, RM 70 500, 1 Jun 2013 – 31 Mei 2015
  5. A Novel Optimal Switching Strategy for Direct Torque Control of Induction Machines Utilizing Multilevel Inverter, Co-researcher, FRGS/2013/FKE/TK02/02/1/F00159, RM 138 560, 1 Mei 2013 - 30 April 2016
  6. New Approach of Experimental and Computational Intergration  to Investigate the biomechanical Properties for Aricular Cartilage in Synovial Joint, Co Reseacher, FRGS(RACE)/2013/FKM/TK2/1 F00200, RM 50 000, 1 Feb 2014 – 31 Jan 2016
  7. A Novel Key Driving Parameters Of Nominal Stack Efficiency Towards Thermodynamic Potential In Proton Exchange Membrane (Pem) Fuel Cell, Co-Researcher, RAGS/2013/FKE/TK02/02/B00025, RM 52 900, 1 Oct 2013 – 30 Sept 2015
  8. A New Time Frequency Distribution Technique Of Electromyography Pattern Recognition For Exoskeleton Bionic Arm Robot, Co-Researcher, RAGS/2013/FKE/TK02/03/B00026, RM 77 000, 1 Oct 2013 – 30 Sept2015
  9. Feasibility Study Of Palm Oil As New Insulation Medium For Power Transformer, Co-Researcher, RAGS/2013/FKE/Tk02/01/B00024, RM 61 500, 1 Oct 2013 – 30 Sept 2015
  10. New Image Processing Technique for Brain Lesion Detection and Classification System based on Magnetic Resonance Imaging (MRI) Images, Co-Researcher, PJP/2013/FKEKK(4B)/S01142, RM 20 000, 1 Jun 13 – 30 Nov 14
  11. Development of Portable Bluetooth Device for Noninvasive Glucose and Heart Rate Monitoring Systems for Diabetic targeted patient, Co-Researcher, PJP/2013/FKEKK(30C)/S01220, RM 19 050,1 Oct 13 – 31 Mac 15
  12. Perfomance Analysis of Real Time Power Quality Signals Detection and Classification System, Co-Researcher, PJP/2013/FKE(12C)/S01192, RM 16 900, 1 Jun 13 – 30 Nov 14
  13. Design and Development of On Load Tap Changer (OLTC) Demo Box For Simulated Fault Conditions Studies Using Dynamic Winding Resistance Measurement (DWRM), Co-Researcher, PJP/2013/FKE(15C)/S01205, RM 15 300, 1 Jun 13 – 30 Nov 14
  14. Development of Time-Frequency Distributions (TFD) Measurement Technique for Transformer Fault Identification, Co-Researcher, PJP/2013/FKE(16C)/S01206, RM 12 200, 1 Jun 13 – 30 Nov 14.
Year 2012:
  1. A New Online State-of-Charge Estimation and Monitoring System for Electric Vehicle, Principle Researcher, RAGS/2012/FKE/TK07/1 B100011, RM 55 000, 15 Dec 2012 – 14 Nov 2014
  2. Development of Real Time Power Quality Disturbance Detection & Classification System, Principle Researcher, FRGS(RACE)/2012/FKE/TK02/02/2 F00152, RM 49 900, 1 Dec 2012 – 30 Nov 2014
  3. EMG Signal Analysis using Time-Frequency Distributions For Exoskeleton Robot-Bionic Arm Model, Principle Researcher, PJP/2012/FKE(11D)/S01121, RM 15 000, 1 Oct 2012 – 31 Mac 204
  4. Network Communication Over Power Line in Low-Voltage Direct Current for DC-Microgrid-UTeM, Principle Researcher, PJP/2012/FKE(1A)S01038, RM 13 200, 1 Jun 2012 – 30 Nov 2013
  5. A new Design Framework for Sustainable Electricity Distribution System in Malaysia, Co-Researcher, FRGS/2012/FKE/TK02/02/1/F00121, RM56 000, 1 May 2012 – 30 April 2014
  6. Investigation of Bionic Hand Controller Based on Forearm EMG Signal for Exosceleton Robot, Co-Researcher, RAGS2012/UTEM/TK02/1 B00008, RM55 000, 15 Dec 2012-14 Nov 2014
  7. High Torgque Performance of Direct Taorque Control (DTC) of 5-Pahse Induction Machine using Hybrid Control Strategy, Co-Researcher, ERGS/1/2012/TK02/UTEM/02/4, RM 86 000, 1 May 2012 – 30 April 2014
  8. Real Time Pattern Rcognition and Classification of EMG Signal for Exoskeleton Bionic Arm Model using Neural Network, Co-Researcher, PJP/2012/CERIA/Y00002, RM150 000, 1 Oct 12 – 31 Mac 14
  9. Power Quality Mitigation An MOU Activity with Siltera, Co-Researcher, PJP/2012/FKE(3A)/S01072, RM17 000, 1 Oct 12 – 31 Mac 14
  10. A Novel Dual-Mode Flux Control Strategy using Wide-Speed High Torque Capabilty for Hybrid Vehicles, Co-Researcher, PJP/2012/FTK(2A)/S01079, RM 19 300, 1 Oct 12 – 31 Mac 14
  11. Development of PV Intergrated Direct Curent Microgrid-UTeM, Co-Researcher, PJP/2012/FKE(37A)S01041, RM 24 600,1 Jun 12 – 30 Nov 13
  12. Development Of Islanding Detection Interface For Renewable Energy Connected Microgrids, Co-Researcher, PJP/2012/FKE(58A)/S01065, RM 20 000, 1 Jun 12 – 30 Nov 13

Year 2011:
  1. Power Quality Signals Detection and Classification using Time-Frequency Distributions, Principle Researcher, PJP/2011/FKE(33C)/S00975, RM 12 000, 1 Nov 2011 – 31 Oct 2012
  2. Malaysian Vehicle License Plate Recognition, Co-Researcher, RM 11 300, 1 Nov 11 – 31 Oct 12
  3. Development of Experimental Set-Up of DC motor Drive for Laboratory Module and Supported Research Facilities, Co-Researcher, PJP/2011/FTK(8A)/S00958, RM 9 000, 1 Nov 11 – 31 Oct 12
  4. Techno-economic appraisal of green technologies integration on UteMs Buildings, Co-Researcher, PJP/2011/FKE(35A)/S00977, RM 10 000, 1 Nov 11 – 31 Oct 12
  5. A Novel Direct Torque Control Scheme for High Torque Performance Five-phase Induction Machine Drive, Co-Researcher, PJP/2011/FKE(2C)/S00820, RM 20 000, 1 Mac 11 - 29 Feb 12
  6. High Performance Torque Control of Brushless DC Motor for Electric Vehicle Applications, Co-Researcher, PJP/2011/FKE(3C)/S00821, RM 19 000, 1 Mac 11 - 29 Feb 12
  7. Pico - Magnetic Generator, Co-Researcher, PJP/2011/FKE(12A)/S00829, RM 17 700, 1 Mac 11 - 29 Feb 12
  8. Color Constancy Algorithm to Improve Color Deviations and Clarity in CCTV Surveillance Camera, Co-Researcher, PJP/2011/FKE(17C)/S00834, RM 14 500, 1 Mac 11 - 29 Feb 12
  9. The Development of An Artificial Reinforcement Material for Polymeric Composite Electrical Insulation from Waste Material, Co-Researcher, PJP/2011/FKE(29A)S00945, RM 15 500, 1 Mac 11 - 29 Feb 12
______________________________________________________________________________________________________________________
PUBLICATION

Book
1. Abdul Rahim Abdullah and Norhashimah Mohd Saad, “Real Time Digital Signal Processing: A Practical Approach Using TMS320C6713 DSP Processor”, UTeM Publisher, 2007. ISBN: 978-983-2948-16-2.

Journal/Proceeding

 2017
1.     NM Saad, NSM Noor, AR Abdullah, OY Fong, NNSA Rahman, "Real-Time LCD Digit Recognition System", Indonesian Journal of Electrical Engineering and Computer Science, Vol.6, No. 2, pp. 402-411, 1 May 2017.
2.     AR Abdullah, AR Syafeeza, MAUC Mood, TNST Zawawi, AR Munzier, "An Improved Features of Health Screening Test System for Malaysian Social Security Organisation (SOCSO) Programme", Indonesian Journal of Electrical Engineering and Computer Science, Vol.6, No.2, pp. 473-481 , 1 May 2017
3.     M Hatta Jopri, A Rahim Abdullah, Mustafa Manap, M Faiz Habban, Tole Sutikno (2017), “An Accurate Classification Method of Harmonic Signals in Power Distribution System by Utilising S-Transform”, International Journal of TELKOMNIKA (Telecommunication Computing Electronics and Control), Vol. 15, No. 1, pp. 157-161, 3 Jan 2017. doi: http://dx.doi.org/10.12928/telkomnika.v15i1.3119
4. M Hatta Jopri, A Rahim Abdullah, Mustafa Manap, M Rahimi Yusoff, Tole Sutikno (2017), “A Fast Localization of Multiple Harmonic Sources for Rectifier Loads by Utilizing Periodogram”, International Journal of TELKOMNIKA (Telecommunication Computing Electronics and Control), Vol. 15, No. 1, pp. 157-161, 3 Jan 2017. doi: http://dx.doi.org/10.12928/telkomnika.v15i1.3120
5. MF Habban, M Manap, AR Abdullah, MH Jopri, T Sutikno (2017), “An Evaluation of Linear Time Frequency Distribution Analysis for VSI Switch Faults Identification”, International Journal of Power Electronics and Drive Systems (IJPEDS), Vol. 8, No. 1
6.     EF Shair, SA Ahmad, MH Marhaban, SB Mohd Tamrin, AR Abdullah, "EMG Processing Based Measures of Fatigue Assessment during Manual Lifting", BioMed research international, Vol. 2017, pp. 1-12, 19 Feb 2017
7. MH Jopri, AR Abdullah, M Manap, MR Yusoff, T Sutikno, MF Habban (2017), “An Improved Detection and Classification Technique of Harmonic Signals in Power Distribution by Utilizing Spectrogram”, International Journal of Electrical and Computer Engineering (IJECE), Vol. 7, No. 1.
8. MH Jopri, AR Abdullah, T Sutikno, M Manap, MR Yusoff  (2017), “A Utilisation of Improved Gabor Transform for Harmonic Signals Detection and Classification Analysis”, International Journal of Electrical and Computer Engineering (IJECE), Vol. 7, No. 1.
9.    H Musa, FR Azmi, AR Abdullah, H Hazmilah, M Sedek, "Developing learning model in effective social entrepreneurship", Proceedings of Mechanical Engineering Research Day 2017, Vol. 2017, pp. 290-291, 29 May 2017
10.    FR Azmi, H Musa, AR Abdullah, NA Othman, S Fam, "Analyzing the awareness of green technology in Malaysia practices", Proceedings of Mechanical Engineering Research Day 2017, Vol. 2017, pp. 252-254, 29 May 2017
11.    H Musa, FR Azmi, AR Abdullah, M Sedek, NM Saad, "Emotional intelligence and stress among SME entrepreneurs in Melaka: A case of entrepreneurial education", Proceedings of Mechanical Engineering Research Day 2017, Vol. 2017, pp. 248-249, 29 May 2017
12.  Abdul Rahim Abdullah, Mohd Hatta Jopri, Mustafa Manap, Mohd Rahimi Yusoff,"An Improved Spectrogram to Identify Multiple Harmonic Sources in Distribution System with Inverter Loads", Proceedings of the International MultiConference of Engineers and Computer Scientists 2017 Vol II, IMECS 2017, March 15 - 17, 2017, Hong Kong.
13.  N. Mohd Saad, N.N.S. Abdul Rahman, A.R. Abdullah, A.R. Syafeeza, N.S.M. Noor," Quadratic Distance and Level Classifier for Product Quality Inspection System", Proceedings of the International MultiConference of Engineers and Computer Scientists 2017 Vol I, IMECS 2017, March 15 - 17, 2017, Hong Kong. 
14.    N. Mohd Saad, N. S. M. Noor, A.R. Abdullah, Sobri Muda, A. F. Muda and N. N. S. Abdul Rahman, "Automated Stroke Lesion Detection and Diagnosis System", Proceedings of the International MultiConference of Engineers and Computer Scientists 2017 Vol I, IMECS 2017, March 15 - 17, 2017, Hong Kong.

 2016
1.    MRM Ridzuan, EE Hassan, AR Abdullah, "A Hybrid MEP and AIS Algorithm for Energy Dispatch in Power System", International Journal of Simulation--Systems, Science & Technology, Vol.17, No. 41, pp. 1-5
2. MH Jopri, AR Abdullah, M Manap, MR Yusoff, T Sutikno, MF Habban (2016), “An Improved of Multiple Harmonic Sources Identification in Distribution System with Inverter Loads by Using Spectrogram”, International Journal of Power Electronics and Drive Systems (IJPEDS), Vol. 7, No. 4.
3.     Ayuni Fateeha Muda, Norhashimah Mohd Saad, Low Yin Fen, Abdul Rahim Abdullah, Nazreen Waeleh, Ahmad Sobri Muda, "Automatic Brain Lesions Segmentation using Fuzzy C-Means with Correlation Template and Active Contour on Diffusion-Weighted Imaging", International Journal of Simulation--Systems, Science & Technology, Vol.17, No. 34, pp. 3.1-3.7, 24 Nov 2016.
4.    TNST Zawawi, AR Abdullah, EF Shair, SM Saleh (2016), "Performance Comparison of EMG Signal Analysis for Manual Lifting using Spectrogram", Journal of Telecommunication, Electronic and Computer Engineering (JTEC), Vol.8, Issue. 7, pp. 29-34.
5.    EF Shair, AR Abdullah, TNST Zawawi, SA Ahmad, SM Saleh (2016), "Auto-Segmentation Analysis of EMG Signal for Lifting Muscle Contraction Activities", Journal of Telecommunication, Electronic and Computer Engineering (JTEC), Vol. 8, Issue 7, pp. 17-22.
6. MRM Ridzuan, EE Hassan, AR Abdullah, N Bahaman, AFA Kadir (2016), “A New Meta Heuristic Evolutionary Programming (NMEP) in Optimizing Economic Energy Dispatch”, Journal of Telecommunication, Electronic and Computer Engineering (JTEC),  Vol. 8, Issue 2, pp. 35-40.
7.    MSSM Basir, AR Abdullah, R Ranom, R Kasim, NA Selamat, NH Shamsudin (2016), “Experimental Verification of Nickel-Metal Hydride Battery Parameters Estimation”,Journal of Telecommunication, Electronic and Computer Engineering (JTEC),  Vol. 8, Issue 2, pp. 47-52
8. NMH Jopri, AR Abdullah, N Mat Kassim, M Manap, NA Ngatiman, MR Yusoff, (2016) “Localization of Multiple Harmonic Sources for Inverter Loads Utilizing Periodogram”, Journal of Telecommunication, Electronic and Computer Engineering (JTEC),  Vol. 8, Issue 2, pp. 87-91.
9. Nabilah Mat Kassim, Abdul Rahim Abdullah, Aida Fazliana Abdul Kadir, Nur Hazahsha Shamsudin (2016), “Harmonics Source Identification Analysis using Spectrogram for Rectifier Load”,Journal of Telecommunication, Electronic and Computer Engineering (JTEC)  Vol. 8, Issue 2, pp. 41-46.
10. Nabilah Mat Kassim, Abdul Rahim Abdullah, Aida Fazliana Abdul Kadir, Nur Hazahsha Shamsudin (2016), “Analysis of harmonic source identifier using periodogram”, Journal of Engineering and Applied Sciences,  Vol. 11, Issue 8, pp. 5071-5077.
11. M Manap, AR Abdullah, NZ Saharuddin, NA Abidullah, NS Ahmad, N Bahari (2016), “Voltage Source Inverter Switches Faults Analysis Using S-Transform”, International Journal of Electronics and Electrical Engineering, Vol. 4, No. 2, pp. 157-161, April 2016. doi: 10.18178/ijeee.4.2.157-161.
12. Rizanaliah Kasim, Abdul Rahim Abdullah, Nur Asmiza Selamat, Muhammad Sufyan Safwan Mohamad Basir, Mohd Zulkifli Ramli (2016), “Nickel-Cadmium battery analysis using spectrogram”, Journal of Engineering and Applied Sciences,  Vol. 11, Issue 6, pp. 3975-3979
13. Tengku Nor Shuhada Tengku Zawawi, Abdul Rahim Abdullah, Isa Halim, Ezreen Farina Shair, Saleha Mohamad Salleh (2016), “Application of spectrogram in analysing electromyography (EMG) signals of manual lifting”, Journal of Engineering and Applied Sciences,  Vol. 11, Issue 6, pp. 2603-3609.
14. Muhammad Zuhaili Razali, Abdul Rahim Abdullah, Wan Ahmad Najmi Wan Mohamed, Mohd Shahril Ahmad Khiar (2016), “Hydrogen Inlet Pressures Parameter Analysis Of Proton Exchange Membrane Fuel Cell (Pemfc) Using Spectrogram”, Journal of Engineering and Applied Sciences,  Vol. 11, Issue 6, pp. 3875-3882.
15.     Ayuni Fateeha Muda, Norhashimah Mohd Saad, Low Yin Fen, Abdul Rahim Abdullah, Nazreen Waeleh,"Automated Brain Lesion Classification using Hybrid Fuzzy C-Means with Correlation Template and Wavelet Transform", Jurnal Teknologi, Vol. 78, No. 7-5, pp.39-48
16.     Muhammad Zuhaili Razali, Abdul Rahim Abdullah, Wan Ahmad Najmi Wan Mohamed, Mohd Shahril Ahmad (2016), "Stack temperature parameter analysis of proton exchange membrane fuel cell (PEMFC) using spectrogram", Journal of Scientific Research and Development, Vol. 17, Issue. 5, pp. 63-68.2. Nur Fawwaz Asri, Teuku Husaini, Abdul Rahim Abdullah, Abu Bakar Sulong, Wan Ramli Wan Daud, Edy Herianto Majlan (2016), “Interfacial Contact Resistance for Ti-6Al-4V and SUS 316L Plates as Bipolar Plates in PEMFC”, Middle-East Journal of Scientific Research,  Vol. 24, Issue 4, pp. 1436-1442
18.    Aida Fazliana Abdul Kadir, Chin Kim Gan, Abdul Rahim Abdullah, "Optimal allocation and sizing of photovoltaic-based distributed generation for voltage dip improvement", 2016 IEEE International Conference on Power and Energy (PECon), pp. 89-94, 28 Nov 2016.
19.    NM Kassim, AR Abdullah, AF A Kadir, MH Jopri, NH Shamsudin, "Performance verification of real-time harmonic sources identification system", 2016 IEEE International Conference on Power and Energy (PECon), pp. 350-355, 28 Nov 2016.

 2015
1. N. H. Shamsudin, N. Isnzhal, A. R. Abdullah, “An Improved Crossover Genetic Algorithm with Distributed Generator (DG) installation for DNR restoration in reducing power losses”, the International Review on Modelling and Simulations (IREMOS),  Vol. 8, Issue 5, pp. 566-575. GS
2. N.H. Shamsudin, N.A. Misdar, A. R. Abdullah, M.S.S.M. Basir, N. A Selamat (2015), “Speed Warning System Using Solar Power”, Journal of Theoretical & Applied Information Technology, Oct2015, Vol. 80 Issue 3, p431-438. 8p. GS.
3. A. R. Abdullah, R. Kasim, N. A. Selamat and M. Z. Ramli, “Nickel-Metal Hydride Battery Analysis Using Spectrogram”, ARPN Journal of Engineering and Applied Sciences, Vol. 10, No. 15 August 2015.
4. M. Z. Razali, A. R. Abdullah, W. A. N. W. Mohamed, M. S. A. Khiar (2015), “Effect of Hydrogen Inlet Pressure Analysis on open Voltage of Proton Exchange Membrane (PEM) Fuel cell by using Periodogram”, Australian Journal of Basic and Applied Sciences, 9(12) Special 2015, Pages: 86-92. Eprint*,RG
5. R. Kasim, A. R.Abdullah, N. A. Selamat, N. H. Bahari and M. Z. Ramli (2015), “Lithium-ion Battery Parameter Analysis Using Spectrogram”, Australian Journal of Basic and Applied Sciences, 9(12) Special 2015, Pages: 76-80. eprint*,RG, GS.
6. A. R. Abdullah, N. H. H. Ahmad, N. A. Abidullah, N. H. Shamsudin, M. H. Jopri (2015), “Performance Evaluation of Real Power Quality Disturbances Analysis using S-transform”, Applied Mechanics and Materials Journal, Vol. 752-753, pp. 1343-1348 – eprint, RG, GS.
7. E. F. Shair, S. Y. Khor, A. R. Abdullah, H. I. Jaafar, N. Z. Saharuddin, and A. F. Zainal Abidin,” Cuckoo Search Approach for Cutting Stock Problem”, International Journal of Information and Electronics Engineering, Vol. 5, No. 2, pp: 138-143, March 2015. Eprint, RG, GS.
8.    AN Ramani, AR Abdullah, N Norddin, NQZ Abidin, A Aman, "Automated Classification System for Polymeric Insulation Surface Condition" ,  International Journal of Electrical Energy, Vol. 3, No. 2, June 2015.
9. Ayuni Fateeha Muda, Norhashimah Mohd Saad*, S.A.R. Abu-Bakar, Sobri Muda, A.R. Abdullah, “Brain Lesion Segmentation Using Fuzzy C-Means on Diffusion-Weighted Imaging” ARPN Journal of Engineering and Applied Sciences, VOL. 10, NO. 3 (2015) 1138-1144.
10. Tengku Zawawi, T. N. S.; Abdullah, A. R.; Shair, E. F.; Halim, I.; Mohamad Saleh, S. (2015), “EMG Signal Analysis of Fatigue Muscle Activity in Manual Lifting”, Journal of Electrical Systems, Vol. 11, Issue 3, pp. 319-325. GS.
11. S. Daud, A. F. A. Kadir, C. K. Gan, A. R. Abdullah, M. F. Sulaima, N. H. Shamsudin, “Optimal Placement and Sizing of Renewable Distributed Generation via Gravitational Search Algorithm”, Applied Mechanics and Materials Vol. 785 (2015) pp 556-560, 2015. RG, GS.
12. Mohd Arif Abu Hassan, Abdul Rahim Abdullah, Nurhazilina Bahari, and Muhammad Ihsan Mohd Sabri, “Efficiency Comparison of Trapezoidal and Sinusoidal Method for Brushless DC Motor Drive”, Applied Mechanics and Materials Vol. 785 (2015) pp 248-252, 2015. eprint, RG, GS.
13. M. Manap, A. R. Abdullah, N. Z. Saharuddin, N. A. Abidullah, N. S. Ahmad, M. H. Jopri, “Performance Comparison of VSI Switches Faults Analysis Using STFT and S transform”, Applied Mechanics and Materials Vol. 785 (2015) pp 210-214, 2015. eprint, RG, GS.
14. R. Kasim, A. R. Abdullah, N. A. Selamat,N. A. Abidullah, and T.N.S.T.Zawawi, “Lead Acid Battery Analysis using Spectrogram”, Applied Mechanics and Materials Vol. 785 (2015) pp 692-696, 2015. eprint, RG, GS.
15. R.Kasim, A.R.Abdullah, N.A.Selamat M.F.Baharom, N.H.T.H.Ahmad, “Battery Parameters Identification Analysis using Periodogram”, Applied Mechanics and Materials Vol. 785 (2015) pp 687-691, 2015. eprint, RG, GS.
16. M. Mustafa, N. S. Ahmad, A. R. Abdullah, N. Bahari (2015), “Comparison of Open and Short-Circuit Switches Faults Voltage Source Inverter (VSI) Analysis Using Time-Frequency Distributions”, Applied Mechanics and Materials Journal, Vol. 752-753, pp. 1164-1169 – eprint, RG, GS.
17. N. S. Ahmad, M. Mustafa, A. R. Abdullah, N. A. Abidullah, N. Bahari (2015), “Voltage Source Inverter Fault Detection System using Time Frequency Distribution”, Applied Mechanics and Materials Journal, Vol. 761, pp. 88-92 – eprint*, RG, GS.
18. A. R. Abdullah, N. A. Abidullah, N. H. Shamsudin, N. H. H. Ahmad, M. H. Jopri (2015), “Performance Verification of Power Quality Signals Classification System”, Applied Mechanics and Materials Journal, Vol. 752-753, pp. 1158-1163 – eprint, RG, GS.
19 K. A. Karim, M. N. Othman, W. A. Redhauddin, M. I. Bugis, Z. Ramli, A. R. Abdullah, A. Jidin (2015),” Electric Vehicle Development and Prediction of Battery Consumption Based On a Journey Profile”, Applied Mechanics and Materials Journal, Vol. 699, pp. 794-799 – RG, RG
20. NH Shamsudin, MSSM Basir, AR Abdullah, MF Sulaima, EF Shair, “Losses minimization in network reconfiguration for fault restoration via a uniform crossover of genetic algorithm”, IEEE International Symposium on Technology Management and Emerging Technologies (ISTMET 2015), pp. 330-334, 25 August 2015.
21. EF Shair, TNST Zawawi, AR Abdullah, NH Shamsudin, I Halim, “sEMG signals analysis using time-frequency distribution for symmetric and asymmetric lifting”, IEEE International Symposium on Technology Management and Emerging Technologies (ISTMET 2015), pp. 233-237, 25 August 2015.
22. Ayuni Fateeha Muda, Norhashimah Mohd Saad*, Nazreen Waeleh,Abdul Rahim Abdullah, Low Yin Fen, “Integration of Fuzzy C-Means with Correlation Template and Active Contour for Brain Lesion Segmentation in Diffusion-Weighted MRI”, 2015 Third International Conference on Artificial Intelligence, Modelling and Simulation, (2015) 268-273.
      
2014
1. N. A. Abidullah, A. R. Abdullah, A. Z., Sha’ameri N. H. Shamsudin, N. F. T. H. Ahmad , MH Jopri (2014), “Real-Time Power Quality Disturbances Detection and Classification System”, World Applied Sciences Journal, Vol. 32, N. 8, :eprint, uris,RG, GS.
2. EF Shair, SY Khor, AR Abdullah, HI Jaafar, NM Ali, AFZ Abidin (2014), “A Brief Review of Cuckoo Search Algorithm (CSA) Research Progression from 2010 to 2013”, International Review of Automatic Control (IREACO) 7 (5), 428-435. eprint,RG, GS.
3. N.H. Shamsudin, N.F. Omar, A.R. Abdullah, M.F. Sulaima, N.A. Abidullah and H.I. Jaafar, “An Improved Genetic Algorithm for Power Losses Minimization using Distribution Network Reconfiguration Based on Re-rank Approach”, Research Journal of Applied Sciences, Engineering and Technology 8(8), 1029-1035, 2014. RG, GS.
4. N. S. Ahmad, A. R. Abdullah, N. Bahari, M. A. A. Hassan (2014), “ Switched Faults Analysis of Voltage Source Inverter (VSI) using Short Time Fourier Transform (STFT), International Review of Modelling and Simulations (I.RE.MO.S), Vol. 7, N. 3, pp. 409-415, June 2014 ISSN:1974-9821. :eprint, RG, GS.
5. S.H.A. Musa, A.R. Abdullah, C.K. Gan, N.H. Rahim, R. Kasim (2014), “Performance Evaluation of DC Microgrid System for Residential LED Lighting Application”, International Review of Electrical Engineering (I.R.E.E.), Vol. 9, N. 3, pp. 648-654, May - June 2014 ISSN:1827-6660  – ISI. :eprint, RG, GS.
6. N. H. T. Ahmad, A. R. Abdullah, N. A. Abidullah, M. H. Jopri (2014), “Analysis of power quality disturbances using spectrogram and S-Transform”, International Review of Electrical Engineering (I.R.E.E.), Vol. 9, N. 3, pp. 611-619, May – June 2014 ISSN:1827-6660  – ISI :eprint, uris, RG, GS.
7. N. H. Shamsudin, N. A. Abidullah, A. R. Abdullah, M. S. Mamat, M. F. Sulaima, H. I.Jaafar, “A new technique for the reconfiguration of radial distribution network for loss minimization”, International Journal of Engineering and Technology (IJET), 6(5), )ct-Nov 2014, pp: 2488-2495. RG,eprint, GS.
8. M. A. A Hassan, A.R. Abdullah, N. Bahari (2014), “Speed Control Analysis of Brushless DC Motor Based on Maximum Amplitude DC Current Feedback”, MATEC Web of Conferences, Vol.13, 03007 ISSN: 2261-236X : RG,eprint, GS.
9. N. S. Ahmad, A. R. Abdullah, N. Bahari (2014), “Open and Short Circuit Switches Fault Detection of Voltage Source Inverter Using Spectrogram”, Journal of International Conference on Electrical Machines and Systems, Vol. 3, Issue. 2, Pg. 190-199. :eprint, RG, GS.
10. M. H. Jopri, N. A. Abidullah, G. Z. Peng, A. R. Abdullah (2014), “A New Two Points Method for Identify Dominant Harmonic Disturbance Using Frequency and Phase Spectrogram”, International Review of Electrical Engineering (I.R.E.E.), Vol. 9, N. 2, March - April 2014: ISI :eprint, RG, GS.
11. A. R. Abdullah, N. A. Abidullah, NH Shamsudin, NHH Ahmad, MH Jopri (2014), “Power Quality Signals Classification System Using Time-Frequency Distribution”, Applied Mechanics and Materials Journal, Vol. 494, 1889-1894. ISSN: 1660-9336. :eprint, RG, GS.
12. K.A. Karim, M. N. Othman, A. Jidin, A. R. Abdullah, M.Z. Ramli (2014),”Development of Integrated Monitoring System for Re-Electric Vehicle”, Jurnal Teknologi, 71:2(2013), 99-104,2014.
13.  A. R. Abdullah, G. Z. Peng, S. A. Ghani, M. H. Jopri, “A new vector draft method for harmonic source detection at point of common coupling”, 2014 IEEE 8th International Power Engineering and Optimization Conference (PEOCO), Langkawi, Kedah, pg.110-114, 24-25 March 2014, RG,eprint, GS

2013
1. A.R. Abdullah, N.H.T.H. Ahmad, A.Z. Shameri, N.A Abidullah, M.H. Jopri, E.F. Shair (2013), “Optimal Kernel Parameters of Smooth-Windowed Wigner-Ville Distribution for Power Quality Analysis”, Journal of Basic and Applied Physics, Nov. 2013, Vol. 2 Iss. 4, PP. 235-242. ISSN:2304-9340(Print) ,ISSN:2304-9332(Online) : RG,eprint, GS.
2. N. Q. Z. Abidin; A. R. Abdullah; N. Norddin; A. Aman, “Online Surface Condition Monitoring System Using Time Frequency Distribution on High Voltage Insulators”, Australian Journal of Basic and Applied Sciences, Vol.7, No. 11, pp. 7-14, Spet 2013
3. N. Norddin, A. R. Abdullah, N. Q. Z. Abidin, A. Aman (2013), “High Voltage Insulation Surface Condition Analysis using Time Frequency Distribution”, Australian Journal of Basic and Applied Sciences 7 (7), 833-841. : RG,eprint, GS.
4. S. H. A. Musa, A. R. Abdullah, N. H. Rahim, and C. K. Gan, "Laboratory Experiment of Compact Fluorescent and Compact LED Lamp for Residential Area," in IEEE Student Conference on Research and Development (SCOReD), 2013, Putrajaya, Malaysia, 16 -17 December 2013. RG,GS.
5. M. A. A. Hassan, A. R. Abdullah, N.Bahari, and A.Jidin  "Incorporating Brushless DC Motor in Outdoor Fan Control of Low Voltage Air-Conditioning System," in IEEE Student Conference on Research and Development (SCOReD), 2013, Putrajaya, Malaysia, 16 -17 December 2013. RG, GS.
6. N. A. Abidullah, A. R. Abdullah, N. H. Shamsudin, N. H. T. H. Ahmad and M. H. Jopri, "Real-Time Power Signals Monitoring System," in IEEE Student Conference on Research and Development (SCOReD), 2013, Putrajaya, Malaysia, 16 -17 December 2013. RG, GS.
7. T. N. S. T. Zawawi, A. R. Abdullah, E. F. Shair, I. Halim, and Rawaida. O, "Electromyography Signal Analysis using Spectrogram," in IEEE Student Conference on Research and Development (SCOReD), 2013, Putrajaya, Malaysia, 16 -17 December 2013. eprint, RG,GS.
8. H. I. Jaafar, A.R. Abdullah, Z. Mohamed, J.J Jamian, A.M. Kassim, M.S.M. Aras, M.N.M. Nasir, M.F. Sulaima, “Analysis of Optimal Performance for Nonlinear Gantry Crane System using MOPSO with Linear Weight Summation Approach”, Malaysian Technical Universities Conference on Engineering & Technology (MUCET), 3-4 December 2013, Kuantan, Pahang. eprint, RG, GS.
9. N. S. Ahmad, A. R. Abdullah, N. H. Bahari, Mr. M. Manap, A. Jidin, M. H. Jopri, “Short Circuit Faults Analysis in Voltage Source Inverter using Spectrogram”, International Conference on Electrical Machines and Systems 2013 (ICEMS 2013), 26-29 October 2013, Busan, Korea. eprint, RG, GS.
10. N. F.  Alias, A. Jidin, M. A. Said, A. R. Abdullah, M. H. Jopri, Ms. N. H. Rahim, “Improved Performance of Direct Torque Control of Induction Machine with 3-Level Neutral Point Clamped Multilevel Inverter”, International Conference on Electrical Machines and Systems 2013 (ICEMS 2013), 26-29 October 2013, Busan, Korea. eprint,RG, GS.
11. N. Norddin; A. R. Abdullah; N. Q. Z. Abidin; A. Aman; A. N. Ramani, “Polymeric Insulation Surface Condition Analysis Using Linear Time Frequency Distributions”, IEEE International Power Engineering and Optimization Conference 2013(PEOCO2013), Langkawi, Malaysia: 3-4 June 2013- eprint, RG,mygrant,GS.
12. N.H.T.Huda, A.R. Abdullah, M.H Jopri, “Power Quality Signals Detection Using S-Transform”,  IEEE International Power Engineering and Optimization Conference 2013(PEOCO2013), Langkawi, Malaysia: 3-4 June 2013- eprint, RG, mygrants,eprints,GS.
13. N. Q. Z. Abidin; A. R. Abdullah; N. H. Rahim; N. Norddin; A. Aman, “Online Surface Condition Monitoring System Using Time-Frequency Analysis Technique on High Voltage Insulators”, IEEE International Power Engineering and Optimization Conference 2013(PEOCO2013), Langkawi, Malaysia: 3-4 June 2013- eprint, RG,mygrants,GS.
14. A. Sulaiman, A. R. Abdullah, A. Aman, N. Norddin, N. Q. Zainal Abidin, “Performance Analysis of High Voltage Insulators Surface Condition Using Time-frequency Distribution”,  IEEE International Power Engineering and Optimization Conference 2013(PEOCO2013), Langkawi, Malaysia: 3-4 June 2013- eprint, RG,mygrants,GS.
15. A.R.Abdullah, N.S.Ahmad, E.F.Shair, A.Jidin, “Open Switch Faults Analysis in Voltage Source Inverter using Spectrogram”, IEEE International Power Engineering and Optimization Conference 2013(PEOCO2013), Langkawi, Malaysia: 3-4 June 2013- eprint, RG,mygrants,GS

2012

1. K. Abdul Karim, M. N. Othman ,  A. R. Abdullah, M. Z. Ramli, A. Jidin, “A CONVERSION OF ICE SYSTEM INTO ELECTRIC VEHICLE”, The Power and Energy Conversion Symposium (PECS 2012), Melaka, 17 December 2012. - eprint , mygrants, GS
2. N. H. T. Ahmad,  A. R. Abdullah, M. H. Jopri, “POWER QUALITY SIGNALS DETECTION AND CLASSIFICATION USING LINEAR TIME FREQUENCY DISTRIBUTION”, The Power and Energy Conversion Symposium (PECS 2012), Melaka, 17 December 2012. - eprint , mygrants, GS
3. NM Saad, SAR Abu-Bakar, S Muda, M Mokji, AR Abdullah (2012), “Fully Automated Region Growing Segmentation of Brain Lesion in Diffusion-weighted MRI”, IAENG International Journal of Computer Science, Vol. 39, 2012.- eprint, mygrants,GS
4. NM Saad, SAR Abu-Bakar, A. R. Abdullah, L. Salahuddin, S Muda, M Mokji (2011), “Brain Lesion Segmentation from Diffusion-weighted MRI based on Adaptive Thresholding and Gray Level Co-occurrence Matrix,” Journal of Telecommunication, Electronic and Computer Engineering (JTEC), Vol.3 No. 2, 2011. :eprint,GS
5. A.R. Abdullah, A.Z. Sha’amer (2010), Power Quality Analysis using Bilinear Time-Frequency Distributions, EURASIP Journal on Advances in Signal Processing. Vol(2010) Issue: , 837360, ISSN/EISSN:16876172 16876180 : RG,eprint,GS
6. A. F. Noor Azam, M. Manap, A. Jidin, N. Bahari,  H. Jopri, A. R. Abdullah, “TORQUE HYSTERESIS CONTROLLER FOR BRUSHLESS DC MOTOR DRIVES”, The Power and Energy Conversion Symposium (PECS 2012), Melaka, 17 December 2012. - eprint , mygrants, GS
7. N. Q. Zainal Abidin, A. R. Abdullah, N. Norddin,A. Aman, “ONLINE LEAKAGE CURRENT MONITORING SYSTEM USING TIME-FREQUENCY DISTRIBUTION ON HIGH VOLTAGE INSULATOR”, The Power and Energy Conversion Symposium (PECS 2012), Melaka, 17 December 2012. - eprint , mygrants, GS
8. N. Nordin, A. R. Abdullah,  N. Q. Zainal Abidin, A. Aman , “LEAKAGE CURRENT ANALYSIS OF POLYMERIC INSULATION USING LINEAR TIME FREQUENCY DISTRIBUTION”, The Power and Energy Conversion Symposium (PECS 2012), Melaka, 17 December 2012. – RG,eprint , mygrants, GS
9. N. Nordin, A.R. Abdullah, N. Q. Z. Abidin, A. Amin , “Leakage Current Analysis on Polymeric and Non-Polymeric Insulating Materials Using Time-Frequency Distribution”,  IEEE International Conference on Power and Energy (PECON 2012), Sabah, Malaysis, 2-5 December 2012. – RG,eprint ,mygrants, GS
10. N. A. Bakar, M. R. M. Nawawi, A. R. Abdullah, A. Noordin, Z. Musa, O. C. Xian,” Malaysian vehicle license plate recognition using double edge detection”, IEEE International Conference on Control System, Computing and Engineering (ICCSCE), 2012, Penang , Malaysia, 23-25  Nov. 2012,  pp. 422-426. eprint, RG, GS
11. NB Bahari, A Jidin, AR Abdullah, MN bin Othman, M Manap, “Modeling and simulation of torque hysteresis controller for brushless DC motor drives”, IEEE Symposium on Industrial Electronics and Applications (ISIEA), 2012, 152-155, 23-26 Sept. 2012. – RG,eprint , mygrants, GS
12. N. Nordin, A.R. Abdullah, N. Q. Z. Abidin, A. Amin, “Dielectric Property of Waste Tire Dust-Polypropylene (WTD-PP) Composite For High Voltage Outdoor Insulation Application”,  IEEE International Power Engineering and Optimization Conference 2012 (PEOCO2012), Melaka, Malaysia: 6-7 June 2012. – RG,eprint ,mygrants,GS
13. A. Aman, A.R. Abdullah, M.M. YAacob, “Leakage Current Analysis on Polymeric Surface Condition using Time-Frequency Distribution”,  IEEE International Power Engineering and Optimization Conference 2012 (PEOCO2012), Melaka, Malaysia: 6-7 June 2012- RG,mygrants, GS
14. N. Mohd Saad, S.A.R. Abu-Bakar, Sobri Muda, M. Mokji, A.R. Abdullah,“Automated Region Growing for Segmentation of Brain Lesion in Diffusion-weighted MRI” submitted to the IAENG International MultiConference of Engineers and Computer Scientists 2012 (IMECS 2012). - eprint , mygrants, GS
15. A. R. Abdullah, A. Z. Sha’ameri, N. A. Mohd Said,, N. Mohd Saad, A. Jidin, “Bilinear Time-Frequency Analysis Techniques for Power Quality Signals” the IAENG International MultiConference of Engineers and Computer Scientists 2012 (IAENG 2012). – RG,eprint ,mygrants,GS