Finnleo SCA-BW Heaters

The heaters on this page are fully stainless steel have external CON digital controllers which will control ON/OFF time and sauna temperature, along with light if required. 

Also for your safety a re-settable safety over-temperature cut-out.

Select to include one pack of sauna stones weighing approximately 20kg.

The TOTAL price including delivery will be automatically added at the checkout.

YOU DO NOT NEED TO HAVE A PAYPAL ACCOUNT TO USE THE SHOPPING CART

Delivery to Highlands & Islands requires a separate quote, please email or phone before buying.

PayPal Simple Storefront

PayPal Simple Storefront

PayPal Simple Storefront

PayPal Simple Storefront

Electrical Specification

All these heaters can be connected to either 230V, 50Hz single-phase, or 400V, 50Hz 3-phase supplies.

 

They should be installed by a qualified person and in a domestic property all wiring should comply with BS7671, IET Wiring Regulations 17th Edition and The Building Regulations 2000, Part P.

 

Sauna heaters can sometimes trip residual current devices (RCDs). BS7671, Regulation 703.411.3.3 (page 179 BS7671, 2008) allows these heaters to be connected to NON-RCD circuits

PayPal Simple Storefront

PayPal Simple Storefront

PayPal Simple Storefront

PayPal Simple Storefront

CON Digital Controllers

The CON-11 & 12 automatically control temperature and have an overheat cut-out mounted in the thermostat housing. This device automatically resets when the sauna has cooled sufficiently.


The CON-11 is supplied for up to 6kW heaters, the CON-12 for >6kW heaters.


The dimensions of both controllers are: 25cm wide; 22cm high; 8cm deep.