300-610 VCE Dumps

2020 New Braindump2go 300-610 VCE Dumps Free Share

2020/Sep Latest Braindump2go 300-610 Exam Dumps with PDF and VCE Free Updated Today! Following are some new 300-610 Real Exam Questions!

QUESTION 38

You plan to configure LISP between two data centers. Which two LISP components most be configured? (Choose two.)

A. VTEP

B. the site identifier

C. a map resolver

D. a map server

E. VNI

Answer: CD

Explanation:

http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_lisp/configuration/xe-3s/irl-xe-3s- book/irl-cfg-lisp.html

QUESTION 39

You must design an OTV implementation that supports packets fragmentation.

Which option do you use?

A. adjacency server to track the overlay membership

B. OTV headers defined to allow core to hash traffic

C. Cisco ASR 1000 Series Aggregation Services Router that has Advanced IP Services

D. MTU size of 9216 bytes on all the join interfaces

Answer: C

QUESTION 40

Which statement accurately describe the allocation of IP pool for out of Band management of cisco?

A. A maximum of eight OOB IP address can be configure to access the CIMC on the server

B. The management IP address used to access CIMC on a server can be out of band address the inter connect via the fabric uplink port

C. A maximum of Sixteen OOB IP address can be configure to access the CIMC on the server

D. The management IP address used to access CIMC on a server can be out of band address the inter connect via the Management port

Answer: B

QUESTION 41

Which two vSphere features must be included in the design of a Cisco HyperFlex systems stretched cluster? (Choose two.)

A. HA

B. VSS

C. FT

D. VDP

E. DRS

Answer: AE

Explanation:

https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/HyperFlex_Stretched_Cluster/3_5/ b_HyperFlex_Systems_Stretched_Cluster_Guide_3_5.pdf

QUESTION 42

What can be implemented on Cisco Nexus 5600 Series Switches for link redundancy within a Fibre Channel fabric?

A. vPC+

B. E-Trunk

C. SAN port channel

D. LACP port channel

Answer: D

QUESTION 43

Which factor determines the choice of platform designing a Cisco HyperFlex infrastructure to support computer-aided design applications?

A. network speed

B. GPU support

C. storage capacity

D. processor count

Answer: C

QUESTION 44

What is the disadvantage of asynchronous storage replication as compared to synchronous storage replication in a disaster recovery design?

A. reduction in application performance

B. distance limitations

C. specific backup requirements

D. potential data loss

Answer: D

Explanation:

https://www.evidian.com/products/high-availability-software-for-application-clustering/synchronous-replication-vs-asynchronous-replication/

QUESTION 45

Where does Cisco UCS handle Fibre Channel traffic failover?

A. on a Cisco UCS Fabric Interconnect ASIC in Fibre Channel switching mode

B. on the host, by using multipathing software

C. in the hardware on the Cisco UCS VIC 12xx adapter or later

D. in the hardware on any Cisco UCS VIC adapter

Answer: B

Explanation:

https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/whitepaper_c11-701962.html

QUESTION 46

Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?

A. NPIV mode

B. FC end-host mode

C. NPV mode

D. FC switching mode

Answer: D

Explanation:

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Storage-Mgmt/3-1/b_UCSM_GUI_Storage_Management_Guide_3_1/b_UCSM_GUI_Storage_Management_Guide_3_1_chapter_01110.html

QUESTION 47

Which two naming formats identify target or initiator iSCSI nodes? (Choose two.)

A. WWPN

B. EUI

C. IQN

D. WWN

E. OUI

Answer: CD

Explanation:

https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guides/cli_3_3_1/ciscsi.html

QUESTION 48

What influences the number of ISLs that are required between Cisco MDS Series switches?

A. FCoE protocol

B. type of storage

C. end-to-end oversubscription ratio

D. N Port virtualization

Answer: C

Explanation:

https://www.cisco.com/c/en/us/products/collateral/storage-networking/mds-9700-series-multilayer-directors/white-paper-c11-729697.html

QUESTION 49

Drag and Drop Question

Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.

Answer:

QUESTION 50

Drag and Drop Question

Drag and drop the technologies from the left onto the correct descriptions on the right.

Answer:

QUESTION 51

You plan to implement Cisco Nexus 7000 Series switches in a data center. Which two factors must be considered for the implementation? (Choose two.)

A. M-Series modules support FcoE.

B. In storage VDCs, you can have only storage traffic.

C. Each F-Series module that runs FCoE requires an FCoE license.

D. F1-Series and F2-Series modules cannot exist in the same VDC.

E. F3-Series modules lack support for FEX.

Answer: CE

QUESTION 52

Which two statements accurately describe a Cisco UCS Fabric Interconnect cluster? (Choose two )

A. Only the active Fabric Interconnect forwards data traffic

B. The Fabric Interconnect cluster uses a Cisco UCS B-Senes Blade Server chassis to forward data when the L1-L2 links are down

C. The Fabric Interconnect cluster uses a virtual IP address for management connections

D. The Fabric Interconnect uses L1-L2 links to forward data when the primary Fabric Interconnect uplinks are down.

E. primary Fabric Inter connect node conies up after a failure, the node compares the Cisco UCS system database version to Fabric Interconnect

Answer: CE

QUESTION 53

Which statement accurately describes the configuration requirements for disjoint Layer 2 networks on Cisco UCS?

A. The Cisco UCS fabric Interconnect must be in switch mode.

B. The VLAN IDs must overlap in both Layer 2 domains.

C. All of the uplinks most be in one port channel to keep all of the ports active.

D. The Cisco UCS Fabric Interconnect must be in end-host motto.

Answer: D

QUESTION 54

Which two configurations allow for routing traffic between two VDCs? (Choose two.)

A. Connect the VDCs to an external Layer 3 device.

B. Cross-connect the ports between the VDCs.

C. Create VRF-aware software infrastructure interfaces.

D. Create a policy map in the default VDC that routes traffic between the VDCs.

E. Create interfaces in the VDC that can be accessed by another VDC.

Answer: AD

QUESTION 55

Refer to the exhibit. A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?