WHEEL BOLT PATTERN OFFSET. WHEEL BOLT

Wheel Bolt Pattern Offset. Fifth Wheel Manufacturers. Samsung Color Wheel Calibration.

Wheel Bolt Pattern Offset


wheel bolt pattern offset
    bolt pattern
  • lug pattern / bolt circle / pcd is defined by the number of bolt holes and the distance measured from the center of one lug hole to the farthest lug hole accross from it.  This is often measured in millimeters (25.4mm=1inch).
  • the arrangement of the bolt holes on a wheel. A 4 bolt wheel with 100mm between opposite bolt holes would be written as 4/100. Some wheels have more than one bolt pattern on the same wheel to accomodate multiple fitments.
  • A series of holes drilled in axle flange face that correspond with a series of holes drilled in the brake drum or rotor that wheel studs press into to allow wheels to bolt to the unit.
    offset
  • A consideration or amount that diminishes or balances the effect of a contrary one
  • The amount or distance by which something is out of line
  • compensate for or counterbalance; "offset deposits and withdrawals"
  • beginning: the time at which something is supposed to begin; "they got an early start"; "she knew from the get-go that he was the man for her"
  • counterbalance: a compensating equivalent
  • A short distance measured perpendicularly from the main line of measurement
    wheel
  • A circular object that revolves on an axle and is fixed below a vehicle or other object to enable it to move easily over the ground
  • A circular object that revolves on an axle and forms part of a machine
  • Used in reference to the cycle of a specified condition or set of events
  • steering wheel: a handwheel that is used for steering
  • a simple machine consisting of a circular frame with spokes (or a solid disc) that can rotate on a shaft or axle (as in vehicles or other machines)
  • change directions as if revolving on a pivot; "They wheeled their horses around and left"
wheel bolt pattern offset - Moto Metal
Moto Metal Series MO951 Gloss Black Machined - 16 X 8 Inch Wheel
Moto Metal Series MO951 Gloss Black Machined - 16 X 8 Inch Wheel
With its distinctive semi-split six spoke design, the MOTO Metal MO951 wheel makes its presence known. Its clean spokes and sharp lines combine for a rugged and stylish wheel that adds that finishing touch to your vehicle. This wheel offers a glossy black finish and a machined lip. One-piece painted aluminum with center cap and a one year finish and a lifetime structural warranty. Originating from the Southern California Motocross community, Moto Metal takes street looks and adapts them for today's lifted Truck and SUVs. Aggressive fitments and styles have made Moto Metal one of the top brands in the wheel industry.

87% (17)
FN Wheels - Model: BFD Graphite Grey (Dark Gunmetal) - Size: 18x9" - PCD: 6x139.7
FN Wheels - Model: BFD Graphite Grey (Dark Gunmetal) - Size: 18x9" - PCD: 6x139.7
FN Wheels is proud to offer the BFD. This wheel is available in 18x9" shown here in the following specs: Diameter: 18" Width: 9" Bolt Pattern (PCD): 6x139.7 Offset: 0mm Color: Graphite Grey (Dark Gunmetal) Weight: 22.5lbs The BFD is manufactured using a state of the art counter-pressure cast method that minimizes porosity and maximizes uniformity. Unlike typical (lower cost) gravity cast wheels, counter-pressure cast wheels such as the FN Wheels BFD are lighter, stronger, and are more environmentally friendly to produce. Each FN BFD Wheel is tested to meet or exceed the standards outlined by the stringent JWL-T and VIA standards from Japan. The BFD is also produced to meet or exceed the requirements set forth by the SEMA standard of SAE J2530. Meeting the SAE J2530 standard is noteworthy, because this standard is currently a voluntary standard. Simply speaking, aside from the stunning aesthetics, each FN Wheels BFD is designed to PERFORM. Popular applications include: Chevrolet Pickup / Silverado, GMC Pickup / Sierra, Lexus GX, Nissan Armada, Frontier, Hardbody Pickup, Pathfinder, Titan, Toyota 4-Runner, Pickup, FJ Cruiser, Landcruiser, Sequoia, T100 Tacoma, Tundra, as well as many others.
FN Wheels - Model: BFD Matte Bronze - Size: 18x9" - PCD: 6x139.7
FN Wheels - Model: BFD Matte Bronze - Size: 18x9" - PCD: 6x139.7
FN Wheels is proud to offer the BFD. This wheel is available in 18x9" shown here in the following specs: Diameter: 18" Width: 9" Bolt Pattern (PCD): 6x139.7 Offset: 0mm Color: Matte Bronze Weight: 22.5lbs The BFD is manufactured using a state of the art counter-pressure cast method that minimizes porosity and maximizes uniformity. Unlike typical (lower cost) gravity cast wheels, counter-pressure cast wheels such as the FN Wheels BFD are lighter, stronger, and are more environmentally friendly to produce. Each FN BFD Wheel is tested to meet or exceed the standards outlined by the stringent JWL-T and VIA standards from Japan. The BFD is also produced to meet or exceed the requirements set forth by the SEMA standard of SAE J2530. Meeting the SAE J2530 standard is noteworthy, because this standard is currently a voluntary standard. Simply speaking, aside from the stunning aesthetics, each FN Wheels BFD is designed to PERFORM. Popular applications include: Chevrolet Pickup / Silverado, GMC Pickup / Sierra, Lexus GX, Nissan Armada, Frontier, Hardbody Pickup, Pathfinder, Titan, Toyota 4-Runner, Pickup, FJ Cruiser, Landcruiser, Sequoia, T100 Tacoma, Tundra, as well as many others.

wheel bolt pattern offset
Comments