HOMEPAGE

  • How do I log into my 192.168.0.1 IP address
    192.168.0.1 is a private IP address often used by many Netgear, Linksys, TP-Link, and D-link model routers. When you access this IP address, you can easily customize the default gateway by entering the control panel. 
    How do I log into my 192.168.0.1 IP address?
    1. Open your web browser and enter the IP address of the router into the address bar or go to http://192.168.0.1.
    2. You will then be taken to a D-Link login page. By default, the username is admin and there is no password.
    It's really easy to access your router IP address.
    Note: 192.168.0.1 is a private IPv4 network address, any device on the network can use 192.168.0.1. It is not recommended to assign more than one device to 192.168.0.1 since it may cause an IP conflict.

    Posted Nov 7, 2018, 8:59 PM by Steven A
Showing posts 1 - 1 of 1. View more »
  • NETGEAR ROUTER SETUP
    Here's how to configure your NETGEAR router for Internet connection. It's very easy.
    NETGEAR ROUTER SETUP with Smart Wizard user interface
    1. Connect your modem to the internet port of the NETGEAR router and your computer to any of the four LAN ports.
    2. Power off the computer, router, and broadband/cable modem and then back on again. 
    3. Wait until it finished booting up.
    4. Launch a web browser and type the router's IP address into the address bar (for example: 192.168.0.1, 192.168.1.1, etc.) then hit Enter.
    5. You are prompted to the login page.
    6. Enter your login credentials. The default username is admin and the default password is password.
    7. Click Setup Wizard.
    8. Click Yes then click Next.
    9.  Click Next again to save your settings. 
    Note: Remember not to change the default settings unless your internet service provider gave you specific DNS information that must be configured.  
    Posted by Steven A
  • Change Wifi Password
    A simple guide for those who want to change wifi password just within a few clicks. You can change the default username and password for your Wifi router.
    How to change Wifi password
    1. Open your router's configuration page & enter your router's username and password
    Standard router addresses are 192.168.0.1, 192.168.1.1, or 10.0.1.1, etc. Just enter the address into your browser's address bar.
    2. Open the Wireless section
    3. Change the name (SSID) and/or password
    Look for the box labeled "Password", "Passphrase" or "Shared Key". Then, enter your new desired password into this box. You might be asked to type the password again to make sure that you entered it correctly.
    To create a strong password, use a combination of at least 8 characters, numbers, random cases, and special characters. 
    4. Save your settings
    Click "Apply" or "Save" to save your changes and wait for a few seconds for the process to complete. 
    5. Now you can connect to your router network with your new password.
    Posted Nov 7, 2018, 8:59 PM by Steven A
  • How do I reset my router password
    If you forget your router's username and password, then, you are in the right place. This guide will teach you how to recover it within just a few seconds. There are few options that you can try.
    How do I reset my router password

    How do I reset my router password
    Solution #1: Use the Router's Default Username and Password
    All routers come with documentation or, most commonly, a label on the router itself with its default username and password. They are generally on the back or underside of the router.
    This is one of the most easiest and reliable solutions. If it doesn't work, try the next solution.
    Solution #2: Look Up the Default Username and Password
    In case you can't find the label or documentation with your router's default login information, you can go to 192.168.0.1 to look for your router.
    With this method, you can find it using your router's serial number or model number. Then, check the database.
    Solution #3: Factory Reset
    If the above solutions don't work, you can try to reset the router instead.
    After you reset it to its factory settings, the default login and password will be restored. As the reset button is small and hard to find, you may use a matchstick to press it down for about 15 seconds.
    Posted Nov 8, 2018, 6:18 PM by Steven A
Showing posts 1 - 3 of 3. View more »