SYNTHETIC WHEEL BEARING GREASE : SYNTHETIC WHEEL

SYNTHETIC WHEEL BEARING GREASE : 5X4.5 STEEL WHEELS.

Synthetic Wheel Bearing Grease


synthetic wheel bearing grease
    wheel bearing
  • A bearing or bearing assembly located at each wheel allowing the wheel to spin around the axle with minimal wear and friction. Front wheel bearings are contained within the hub, and are sometimes integral to the hub. A wheel bearing set consists of an inner and outer bearing.
    synthetic
  • (of an emotion or action) Not genuine; insincere
  • man-made: not of natural origin; prepared or made artificially; "man-made fibers"; "synthetic leather"
  • (of a substance) Made by chemical synthesis, esp. to imitate a natural product
  • a compound made artificially by chemical reactions
  • Relating to or using synthesis
  • involving or of the nature of synthesis (combining separate elements to form a coherent whole) as opposed to analysis; "limnology is essentially a synthetic science composed of elementsthat extend well beyond the limits of biology"- P.S.Welch
    grease
  • Oil or fat used or produced in cooking
  • dirt: the state of being covered with unclean things
  • Oily or fatty matter, in particular
  • A thick oily substance used as a lubricant
  • a thick fatty oil (especially one used to lubricate machinery)
  • lubricate with grease; "grease the wheels"
synthetic wheel bearing grease - Red Line
Red Line 80402 Synthetic Grease
Red Line 80402 Synthetic Grease
Red Line CV-2 Grease is designed to withstand the extreme temperatures and pressures which occur in high-performance wheel bearings and CV-joints. The excellent high-temperature stability, extreme- pressure protection, and water resistance enables it to out-perform even the best conventional or synthetic greases. Red Line CV-2 Grease can be used in a wide range of applications at temperatures ranging between -100 degree Farenheit to 500 degree Farenheit and provides good oxidation and corrosion resistance, low evaporation and oil separation, and has a minimum effect on rubber seals. Possesses a very high melting point, excellent water washout resistance and superior antiwear which makes it excellent for high temperatures and extreme loads. CV-2 contains an organic moly and is for wheel bearings, high angle and conventional CV joints, chassis lubrication and high temperature, high speed industrial equipment. The exceptional extreme- pressure performance and the fluidity of the synthetic oil allows increases in bearing life of 200 percent to 800 percent. Red Line CV-2 Grease will retain its consistency and extreme-pressure performance under high- temperature and high-shear conditions for extended periods, which extends the performance ranges of the lubricated components. Red Line CV-2 will darken after high-temperature use; this darkening will not detrimentally effect the performance of the grease. Although Red Line CV-2 is compatible with small amounts of many petroleum-based greases, it is always good lubrication practice to thoroughly clean out the old grease to eliminate abrasive particles and to minimize the possibility of grease incompatibility.

77% (12)
Synthetic Padparadschah Sapphire
Synthetic Padparadschah Sapphire
All of the synthetic corundum listed here are in the form of split boules. As is the normal practice, synthetic corundum boules are split in half , length-wise, at the factory to relieve internal pressures. Click on the individual photos to get details of each lot.
GH3 - Synthetic Ivory
GH3 - Synthetic Ivory
The CLP340 comes with Yamaha's 'Graded Hammer 3' weighted keys. They're also synthetic Ivory so don't feel 'plastic'.

synthetic wheel bearing grease
synthetic wheel bearing grease
Red Line CV-2 Synthetic Grease with Moly - 14 Ounce Jar, Pack of 4
Red Line's CV-2 Synthetic Grease is designed to withstand the extreme temperatures and pressures which occur in high-performance wheel bearings and CV-joints. The excellent high-temperature stability, extreme- pressure protection, and water resistance enables it to out-perform even the best conventional or synthetic greases. Red Line CV-2 Grease can be used in a wide range of applications at temperatures ranging between -100°F to 500°F and provides good oxidation and corrosion resistance, low evaporation and oil separation, and has a minimum effect on rubber seals. It possesses a very high melting point, excellent water washout resistance and superior antiwear which makes it excellent for high temperatures and extreme loads. CV-2 contains an organic moly and is for wheel bearings, high angle and conventional CV joints, chassis lubrication and high temperature, high speed industrial equipment. The exceptional extreme- pressure performance and the fluidity of the synthetic oil allows increases in bearing life of 200% to 800%. Red Line CV-2 Grease will retain its consistency and extreme-pressure performance under high- temperature and high-shear conditions for extended periods, which extends the performance ranges of the lubricated components. Red Line CV-2 will darken after high-temperature use; this darkening will not detrimentally effect the performance of the grease. Although Red Line CV-2 is compatible with small amounts of many petroleum-based greases, it is always good lubrication practice to thoroughly clean out the old grease to eliminate abrasive particles and to minimize the possibility of grease incompatibility.

Comments