WELCOME TO HP

123.hp.com/setup

How To Configure HP Printer?

There are 5 stages to set an HP printer at your home or workplace. Follow the steps of the stages one by one and successfully configure it via 123 hp com oj3830 setup.

Unpackaging your HP printer

• Once you arrive home/ office with your latest HP printer, unpack it immediately.
• Remove all the content from outside the printer such as tape and packaging.
• Remove the tape and packaging from inside as well and take out the HP printer.

Power Settings

• Once the packaging is done, take out the wire and plug-in.
• Plug-in to your operating system and to the power source and turn the ‘Switch’ on.
  • Now, go to the ‘Printer Control’ and then,‘Settings’ to set the following requirements before proceeding:
    1. Language
    2. Time
    3. Region
  • Click on ‘Save Changes’ to submit the information.

Set up the Ink Cartridge

• Open the door of the cartridge and wait until the carriage is idle before continuing with further steps.
• Insert it into the ink cartridge after removing the tape.
• Make sure that you have enabled the ‘Sound’ option as a ‘Click Sound’ will notify that ink cartridges have been securely configured.
• Now, follow the on-screen information and finish the alignment of the ink cartridges
• Open the ‘Paper Tray’ and load it with the blank white papers. Make sure that the papers are of correct dimensions and quality as per what has been set into your operating system. Otherwise, the paper may get stuck.
• Now, connect the HP wireless printer with the computer by opening the ‘Driver’ folder.
• Select the ‘Name’ of your printer and enter the ‘Printer Model’ to confirm the OS version.
• Choose the ‘Type of the Connection’ and follow the rest instruction given on-screen.

How to set up HP Printer to a WPS/ Wi-Fi Connection?

If you want to connect your HP wireless printer with your Wi-Fi network, you must follow the below-mentioned steps carefully. The following method is effective, easy to execute, and does not require any technician’s help.

• Make sure your operating system and network are compatible with each other until logging in.
• Go to the 123.hp.com/setup page and find your printer configuration, then search for the ‘Printer model number’ and press the ‘Install’ button.
• Now open the ‘Downloads’ folder and double-click the ‘Printer setup program’ tab to open.
• Turn your ‘HP Wireless Printer’ ‘On’ and prepare your printer to connect to your operating device.
• Reach to the ‘Network’ section by following the instructions given on-screen.
• When an option of ‘Wireless printer’ will prompt on your screen, click on ‘Ok’ and ‘Next’
• Now click on ‘Yes, give the printer my wireless settings’ and wait while your wireless printer connects to the operating system.
• Once you receive all the related information. Hit the button of ‘Finish’ and print the documents using the newly configured wireless printer.

How To Install An HP Wireless Printer Via CD Media?

The installation procedure of an HP wireless printer into your operating system completes in just a few steps. To begin with the steps, buy a CD of HP printer from the official HP India retail shop and follow the subsequent lists.

• Take out the CD from the pack and insert in your Disk Drive
• Note: You must ensure that the CD has no scratches.
• Your operating system will notify you about the CD inserted, click on the message
• Click on the ‘Start’ button and go to the ‘Computers’
• Double click on ‘CD Drive..’ and open it
• Hit the button of ‘Run’ after reading and agreeing with the ‘Terms and Conditions’
• Follow the on-screen instruction, if any and the installation process will complete

Now, you can scan and print any document via your new HP printer.