Our laboratory aims to establish highly original surface treatment and material synthesis technologies that enable the fabrication of high-performance materials through environmentally friendly and cost-effective processes. Here, we introduce our unique technologies and the highly distinctive, advanced functional materials developed through our research.
Improvement of Corrosion Resistance and Strength in Aluminum and Magnesium Alloys Using Steam Coating (SC)
Aluminum and magnesium alloys, known for their lightweight properties and high specific strength, are expected to expand their applications in transportation equipment and structural components. However, they possess a major disadvantage: they are more prone to corrosion than other metals. To address this, our laboratory has developed the world’s first process that forms a protective coating on aluminum and magnesium alloys using only water (chemical-free), significantly improving their corrosion resistance. This technology is a highly original, eco-friendly process established for the first time by our research group.
As shown in this diagram, the alloy and water are placed inside a pressure- and heat-resistant vessel and heat-treated under specified conditions. The high-temperature, high-pressure steam reacts with the aluminum or magnesium alloy, forming a dense hydroxide-based coating on the surface. Because this coating possesses high corrosion resistance, it enhances the overall corrosion resistance of the alloys while maintaining their inherent lightweight and high-strength properties. Furthermore, this film-deposition process can also be applied to large-scale components.
Furthermore, we have successfully enhanced the hardness (HV) of the alloys while simultaneously forming a corrosion-resistant coating through the high-temperature, high-pressure steam treatment. This Vickers hardness was measured directly on the alloy substrate itself after the coating had been peeled off.
Construction of a Pitting Potential Prediction Model for Steam Coating Films Using Materials Informatics (MI)
Synthesis of Electrode Materials for Metal-Air Batteries Using Solution Plasma (SP)
Metal-air batteries are highly anticipated for their potential to achieve high energy densities because they utilize oxygen from the air as the cathode active material. However, they strictly require catalysts to facilitate efficient oxygen reactions. Heteroatom-doped carbon materials containing elements such as nitrogen or boron in their structures have attracted significant attention as candidate catalysts, leading to various synthesis methods being proposed worldwide. In our laboratory, we synthesize this highly promising heteroatom-doped carbon inside a beaker at room temperature and atmospheric pressure. This is made possible by "Solution Plasma," a low-temperature, non-equilibrium plasma generated directly within a liquid.
By using an organic solvent such as benzene as the raw material for carbon synthesis, solution plasma is generated directly within the liquid. The plasma activates the molecules, triggering a series of chemical reactions that generate carbon materials, as shown in the photo above. If a nitrogen-containing molecule is used as the raw material, nitrogen is incorporated into the carbon framework during the synthesis process, resulting in a nitrogen-doped carbon material. The figures below show the transmission electron microscope (TEM) image and elemental mapping of the carbon synthesized by SP.
Furthermore, we have successfully synthesized a composite material consisting of carbon and CoSn(OH)6. Utilizing this composite material has been shown to deliver excellent catalytic performance for both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The figures below present the transmission electron microscope (TEM) image and elemental mapping of the carbon/CoSn(OH)6 composite, alongside the Linear Sweep Voltammetry (LSV) curves measuring its catalytic properties for OER and ORR. These results clearly demonstrate that the material possesses high catalytic activity for both reactions. Therefore, this composite holds great promise for application as a cathode material in lithium-air (Li-air) batteries.
Fabrication of Electrode Materials for Lithium-Air Batteries Using High-Entropy Oxides (HEOs)
Fabrication of Electrode Materials for Aluminum-Ion Batteries Using Two-Dimensional Layered MXenes
First reported in 2011, MXenes are a class of two-dimensional transition metal carbides and nitrides that have recently garnered immense attention, particularly in the fields of energy storage and conversion. MXenes are represented by the general formula Mn+1XnTx (n = 1-4), where M denotes an early transition metal such as titanium or vanadium, X represents a light element like carbon or nitrogen, and Tx indicates surface termination groups derived from the etching process. They are synthesized by selectively etching the A-layers from layered 3D compounds called MAX phases (general formula Mn+1AXn, where A is typically aluminum). The schematic diagram below illustrates the relationship between the precursor MAX phase and the resulting MXene. Due to their high electrical conductivity, excellent interfacial properties originating from surface functional groups, and unique layered structures, MXenes have been widely reported as electrode materials for energy storage applications, including lithium-air batteries and electric double-layer capacitors (EDLCs). In recent years, high expectations have also surrounded their application as cathode materials for aluminum-ion batteries leveraging these exceptional properties.
The figures below present the XRD patterns and SEM images of the MAX phase (Ti3AlC2) synthesized in our laboratory via the solid-state method, alongside the MXene obtained through the etching process of the MAX phase. The XRD results confirm the presence of peaks characteristic of both the MAX phase and the synthesized MXene, while the SEM images reveal the distinct layered structure unique to MXenes. These findings clearly demonstrate the successful synthesis of MXene. This material holds great promise for applications across various fields. Leveraging this unique layered structure, our laboratory is actively conducting research aimed at utilizing this material as a cathode for aluminum-ion batteries.
Development of Adsorbent Materials for Carbon Dioxide (CO2) Capture
Carbon dioxide (CO2) is one of the primary greenhouse gases and is considered the main driver of recent global warming. Consequently, the development of technologies for CO2 capture and utilization has become indispensable. To address this challenge, our laboratory is actively conducting research and development on the fabrication of adsorbents for CO2 capture and catalyst materials for reducing CO2 into valuable resources. Both approaches utilize carbon-based materials, which are fabricated using our aforementioned Solution Plasma (SP) technology. The figures below show the SEM image, nitrogen adsorption-desorption isotherms, and pore size distribution of the nitrogen-doped carbon synthesized by SP. These results confirm that the material features a porous structure containing mesopores. Furthermore, by optimizing the SP processing conditions, we achieved a CO2 adsorption capacity of 4 mmol/g. These findings clearly demonstrate that the material fabricated in this study is highly viable for use as a CO2 adsorbent.
Development of Catalyst Materials for the Reduction of Carbon Dioxide (CO2) into Valuable Resources
To suppress the progression of global warming, there is an urgent need to establish "Carbon Capture and Utilization (CCU)" technologies that not only reduce emitted carbon dioxide (CO2) but also effectively utilize it as a valuable resource. Among these, electrochemical CO2 reduction (ECR) technology has attracted significant attention because it can convert CO2 into other chemical feedstocks at room temperature and atmospheric pressure using electricity derived from renewable energy sources.
In this study, we targeted the conversion of CO2 into carbon monoxide (CO), which is one of the simplest and most practical ECR products (CO2 + 2H+ + 2e- → CO + H2O). Key challenges in ECR include low selectivity caused by competition with the hydrogen evolution reaction (HER) and the high cost of pure catalysts like silver (Ag). To address these issues, a novel approach is required to integrate the merits of multiple catalyst materials by combining them at the nanoscale. We focused on "nitrogen-doped carbon (N-doped carbon)," which offers high electrical conductivity and structural design flexibility; "ZIF-8," a metal-organic framework (MOF) boasting a high specific surface area and porous structure; and "$\text{Ag}$ nanoparticles," which serve as active centers for CO generation (schematic diagram, left). By combining these materials through our unique "Solution Plasma Method"—a simple, one-step process—we successfully fabricated a composite catalyst material with precisely controlled nanostructures.
Evaluation of the electrochemical CO2 reduction properties using this composite catalyst confirmed that HER was effectively suppressed, and CO could be generated with high current density and Faradaic efficiency (selectivity). This outcome is attributed to the porous structure of ZIF-8, which promotes CO2 capture. The composite architecture of Ag nanoparticles and N-doped carbon contributes to suppressing HER and enhancing ECR activity. These results provide new insights for fabricating high-performance ECR catalysts while minimizing the consumption of expensive materials.
The figures below show the nanoparticles and Ag elemental mapping profiles of the synthesized Ag@C_Cu-ZIF-8. This outcome clearly confirms the successful loading of Ag nanoparticles. Furthermore, when ECR was conducted using this composite material, the generation of CO was successfully confirmed. Notably, it was also revealed that loading the Ag nanoparticles onto the Cu-ZIF-8 framework led to a drastic increase in CO production.