VERTICAL WIRE BALUSTRADE KITS

Wire Balustrade kits from Quickrail offer an economical and attractive alternative to obtrusive bulky cable fittings. One innovative Cabling Kit to simplify installation & dramatically reduce costs. This unique architectural balustrade system is available in horizontal or vertical for both timber and metal posts or combined.

Wire Balustrade Quote for Vertical Installation

To receive a quote. Please click the worksheet file. Fill in the information required and send to us by Fax or Email. We will carefully review your requirements and respond with a quote. You can also review the installation guides to see how the cabling kits are installed. Some Frequently Asked Questions are answered at the end of this page.

VERTICAL WORKSHEET AND MEASURING GUIDE.pdf

For Quickrail Wire Balustrade Installation Videos & more click on the Youtube Image.

Vertical Wire Balustrade guide Timber Top Rail

Timber Installation for Verticals.pdf

Wire Balustrade Installation Metal Top Rail

Vertical wire balustrade for steel rails

Take a tour of some Stainless Wire Balustrade installations that have been applied by our customers.

Vertical Cabling Applications.

FAQ - Wire Balustrade Frequently asked questions & regulations:

Is this system made from 316 (marine) grade stainless steel? Yes, all of our systems are made of 316 grade stainless steel. Meets Australian AS1657 Standards.

Can I install this system myself? Yes, all of our systems have been designed for easy installation.

What type and size of wire can I use? We recommend 1 X 19 strand, 3.2mm, 316 grade stainless steel only as it has the least amount of flex and is more durable.

What are the spaces between cables? For decks that are more than four metres off the ground or if you intend to surround a pool or water area you would have to run the cable vertically. You will require cable spaces of 80mm.

What are Vertical Stay Posts? Under the building code if the Gap between your posts (in a given Bay) is greater than 900mm you require a Vertical stay post. The Stay post is applied to reduce the bowing effect of Top and Bottom rails thus causing Cables to slacken and allow passage through. Quickrail can supply this post with your cable order. Our Vertical stay posts are made from 316 Stainless Steel 19mm Round tube and are Cut to fit your requirements as set out in the worksheet.

For Metal Rails: You will require an 8.5mm hole for Steel Post / Rail Spigots to suit most Steel Rail applications.

How do I obtain a quote or order? For a kit system we require face to face measurements in any straight Vertical Section (Per Bay). For stairs we will require to be notified as the cut on the cable is different to that on a straight run. Please download the 'Precision Quote worksheet'.

What will it cost for freight? Freight varies depending on location. Please put destination when obtaining a quote and it will appear on the quotation.

If I have a Question ? If you have any Queries at all you can CALL US. Refer to our Contact us page.


QUICKRAIL WIRE BALUSTRADE KITS MANUFACTURED BY STK ENGINEERING Pty Ltd

Structural Engineered certified products. Designed Engineered & Manufactured in Australia. To comply with Building Code Of Australia . Meets Australian AS1657 Standards. AUSTRALIAN PATENT # 2004235679

Copyright © STK ENGINEERING Pty Ltd. All Rights Reserved