Wire Balustrade kits from Quickrail offer an economical and attractive alternative to obtrusive bulky cable fittings. One innovative Cabling Kit to simplify installation & dramatically reduce costs. This unique architectural balustrade system is available in horizontal or vertical for both timber and metal posts or combined.

Wire Balustrade Quote for Horizontal Installation

Horizontal Wire Balustrade Estimate and Worksheet measuring guide.

To receive a quote. Please click the Estimate form or Worksheet and measuring guide file. Fill in the information required and send to us by Fax or Email. We will carefully review your requirements and respond with a quote. You can also review the installation guides to see how the cabling kits are installed. Some Frequently Asked Questions are answered at the end of this page.

Horizontal Wire Balustrade Estimate Form

Horizontal wire Balustrade Estimate form


Horizontal wire Balustrade worksheet and measuring guide


Horizontal Wire Balustrade installation guide for Timber Post


Horizontal Wire Balustrade installation guide for Metal Post

For Quickrail Wire Balustrade Installation Videos & more click on the Youtube Image.

Take a tour of some Wire Balustrade installations that have been applied by our customers.

Horizontal Cabling Applications.

FAQ - Wire Balustrade Frequently asked questions & regulations:

Is this system made from 316 (marine) grade stainless steel? Yes, all of our systems are made of 316 grade stainless steel. Meets Australian AS1657 Standards.

Can I install this sytem myself? Yes, all of our systems have been designed for easy installation.

What type and size of wire can I use? We recommend 1 X 19 strand, 3.2mm, 316 grade stainless steel only as it has the least amount of flex and is more durable.

What are the spaces between cables? For Australia, if your deck is more than one metre and less than four metres off the ground you will require cable space of 80mm.

Can I run cable around corners? NO. Cable of 1 X 19 strand can NOT be run around corners. Whenever there is a change in angles you have to change the fittings.

Can I run cable through intermediate posts? Yes, as long as it is in a straight run.

For Metal Posts: You will require an 8.5mm hole with the use of a grommet and a 10mm hole for timber posts. Once again, grommets are used to seal the hole in the timber and keep moisture out.

How do I obtain a quote or order? For a kit system we require face to face measurements in any straight run. For stairs we will require to be notified as the cut on the cable is different to that on a straight run. Please download the 'Precision Quote worksheet'.

What will it cost for freight? Freight varies depending on location. Please put destination when obtaining a quote and it will appear on the quotation.

If I have a Question ? If you have any Queries at all you can CALL US. Refer to our Contact us page.


Structural Engineered certified products. Designed Engineered & Manufactured in Australia. To comply with Building Code Of Australia . Meets Australian AS1657 Standards. AUSTRALIAN PATENT # 2004235679

Copyright © STK ENGINEERING Pty Ltd. All Rights Reserved