Fronk, B. M., (2021), “Chapter 3: Fluid Dynamics and Heat Transfer of Supercritical Carbon Dioxide Cooling” in Transcritical CO2 Heat Pump: Fundamentals and Applications, Wiley, Eds. Zhang, X-R, Yamaguchi, H. 10.1002/9781118380055.ch3
Narayanan, V., Fronk, B M., L’Estrange T., Rasouli, E., (2019), “Supercritical Carbon Dioxide Thermal Power Generation – Overview of the Technology and Microchannel Receiver Development,” in Advances in Solar Energy Research, Springer, Eds. Tyaki, H., Agarwal, A. K., Chakraborty, P. R., Powar, S. https://doi.org/10.1007/978-981-13-3302-6_11
Garimella, S., Fronk, B. M. (2015), “Volume 2: Condensation Heat Transfer,” in Encyclopedia of Two-Phase Heat Transfer and Flow – Fundamentals and Methods, World Scientific Publishers, series ed. John R. Thome. https://doi.org/10.1142/9310-vol2
Jajja, Saad; Sequira, Jessa; Fronk, Brian (2019): Supercritical Carbon Dioxide Heat Transfer Data for Rectangular Microchannels and Micro-Pin Array with Non-Uniform Heated Boundary Condition at Reduced Pressure of 1.1. figshare. Dataset. https://doi.org/10.6084/m9.figshare.9750914.v1
Jajja, S.; Fronk, B. M.(2018): Supercritical Carbon Dioxide Heat Transfer Data for 0.75 mm Square Microchannels with Horizontal, Single-Side Heated Boundary Condition at Reduced Pressure from 1.03 to 1.1. figshare. Dataset. https://doi.org/10.6084/m9.figshare.7144247.v1
Jacob, Tabeel A.; Matty, Ethan P.; Fronk, Brian (2019): In-tube condensation data of R404A, R448A, and R452A in a horizontal 4.7 mm ID tube. figshare. Dataset. https://doi.org/10.6084/m9.figshare.10024739.v2
Jacob, Tabeel A.; Matty, Ethan P.; Fronk, Brian (2019): In-tube condensation data of R134a and R450A in a horizontal 4.7 mm ID tube. figshare. Dataset. https://doi.org/10.6084/m9.figshare.7611674.v1
Jacob, T. A.; Sattar, M.; Ali, N.; Fronk, B. M. (2018): Flow visualization of R-134a at mass fluxes from 75 to 150 kg m-2 s-1, for a quality from 0.1 to 0.8 in square, parallel microchannels (D_H = 0.84 mm). figshare. Media. https://doi.org/10.6084/m9.figshare.5248390.v3
Jajja, S. (2020). Turbulent Heat Transfer of Supercritical Carbon Dioxide in the Proximity of the Pseudo-Critical Point with Non-Uniform Heat Flux Boundary Conditions. (PhD dissertation). Retrieved from https://ir.library.oregonstate.edu/concern/graduate_thesis_or_dissertations/hm50tz669
Jacob, T. (2020). Investigation of In-Tube Non-Equilibrium Condensation of Low Global Warming Potential Refrigerants. (PhD dissertation). Retrieved from https://ir.library.oregonstate.edu/concern/graduate_thesis_or_dissertations/gm80j283g
Matty, E. (2021). Condensation of Zeotropic Mixture, R-454C, and its Individual Components, R-1234yf and R-32 in Microfin Tubes. (Master's thesis). Retrieved from https://ir.library.oregonstate.edu/concern/graduate_thesis_or_dissertations/9s161d76t
Tolley, T. (2020). The Feasibility of Process Intensification of the Water-Gas Shift Reaction using Differential Temperature Microreactors. (Master's thesis). Retrieved from https://ir.library.oregonstate.edu/concern/graduate_thesis_or_dissertations/m039kb91m
Chamorro, D.S. (2020). Impacts of Porous Support Geometry on Membrane Performance and Energy Use in Steam Reforming Process (Master's thesis). Retrieved from https://ir.library.oregonstate.edu/concern/graduate_thesis_or_dissertations/8k71nq15j
Karki, S. (2018). Enabling Feasibility Assessment of Solar Thermal Energy Systems for Industrial Process Heating Applications (Master's thesis). Retrieved from https://ir.library.oregonstate.edu/concern/graduate_thesis_or_dissertations/k643b6518
Bukshaisha, A.A. (2018). Investigation of Seasonal Performance of a Membrane Heat Pump System in Different Climate Regions (Master's thesis). Retrieved from https://ir.library.oregonstate.edu/concern/graduate_thesis_or_dissertations/w6634884q
Polander, M.B. (2018). Investigation of Destratification in Warehouses (Master's thesis). Retrieved from https://ir.library.oregonstate.edu/concern/graduate_thesis_or_dissertations/8g84mr920
Armatis, P.D. (2017). Numerical and Experimental Evaluation of Membrane Based Energy Recovery Ventilator with an Internal Support Structure (Master's thesis). Retrieved from https://ir.library.oregonstate.edu/concern/graduate_thesis_or_dissertations/b27741818
Dokken, C. B. (2017). Potential of Genetic Algorithms for Design of Liquid Cooled Heat Sinks Fabricated Using Additive Manufacturing (Master's thesis). Retrieved from https://ir.library.oregonstate.edu/concern/graduate_thesis_or_dissertations/kw52jf203
Hyder, M. B. (2017). Numbering-up of Parallel Microchannel Arrays to Megawatt Scale Supercritical CO2 Solar Thermal Receivers (Master's thesis). Retrieved from https://ir.library.oregonstate.edu/concern/graduate_thesis_or_dissertations/1z40kz19t
VanderPutten, M. A. (2017). Evaluation of the Predictive Capability of Two-Phase Flow Maps for Microchannel Condensation of R-134a at Low Mass Flux Conditions (Master's thesis). Retrieved from https://ir.library.oregonstate.edu/concern/graduate_thesis_or_dissertations/z316q6548
Zada, K. R. (2017). Experimental Investigation of Supercritical Heat Transfer of Carbon Dioxide in Parallel Square Microchannels with a Single-Wall Constant Heat Flux Boundary Condition (Master's thesis). Retrieved from https://ir.library.oregonstate.edu/concern/graduate_thesis_or_dissertations/5999n6285