About 30 watts tweed combo amplifier, single channel, EQ, gain and master volume, powered 2x6L6 tubes driving single 12" Jensen C12Q vintage speaker.
THE 60s tweed tone, not an easy to grab and go with ... but pleasure to sit next to it and enjoy playing with...
Vintage style tweed, single channel, 3 stage pre-amp based on 3x12AX7, normal/bright switch, clean/drive switch, spring reverb, 3 band EQ. Gain and master Volume controls. 2x6L6 in the power section for full tone response, ended with 12 inch Jensen ceramic C12Q speaker. All together makes excellent combination.
As usually found in my amps, gain and mater volume to let enjoy the tone at any volume level.
March 2020
Specification
Cabinet style: vintage style, pine wood, original tweed, shellac lacquered with unequal coverage for aged look
1x 1/4" input, INPUT
1x 1/4" output speakers - 8 Ohm
1x 1/4" output speakers - 16 Ohm
Power output ~30 watts
1x12" Jensen C12Q (35 watts), 8 Ohm speaker
Pre-amp section: 3xECC83/12AX7
Power amp section: 2x 6L6s
Gain and Master volume
Bright switch- change input characteristices between Normal and Bright channel
Drive mode switch - gain boost
3 band EQ: high, middle and low
Spring reveb, tube driven with control (3 springs, long decay, MOD tank)
Point-to-point wired circuit, no PCB
Tube heaters power supply referenced to ground - no hum noise
No negative feedback
Fixed biased with bias pot inside for adjustment
Power supply ~230-240V,50Hz, ~180W
Size: 45 cm height, 42 cm width, 29 cm depth
Weight: ~16 kg ?
