~ 30 watts tweed combo amplifier, vintage style cabinet insipired by Supro amps, single channel, 3 band EQ, gain and master volume, true spring reverb. Amp is powered by pair of 6L6 tubes driving single 12" Jensen C12Q speaker. Power supply provided by GZ34 rectification tube.
THE 60s tone from the vintage amp...
Vintage style tweed, single channel, 3 stage pre-amp based on 3x12AX7, 3 band EQ. gain and master volume controls. 2x6L6 in the power section, ended with 12 inch Jensen ceramic C12Q speaker. Tube driven reverb spring effect onboard.
As usually found in my amps, individual gain and mater volume to let enjoy the vintage tone at any volume level.
June 2021
Cabinet:
Vintage style, pine wood, original tweed, shellac lacquered, relic finish
Size: 41 cm height, 43 cm width, 27 cm depth
Weight: ~18 kg
Input and output:
1x 1/4" input, INPUT 1 (High impedance)
1x1/4" input, INPUT 2 (Low impedance)
2x RCA - to connect footswitch for Reverb and Deep - basses boost
1x 1/4" output speaker - 8 Ohm
1x12" Jensen C12Q , 8 Ohm imp. speaker
Power output ~30 watts
Controls:
Gain and Master volume
Deep switch - on/off, boost basses - footswtichable
3 band EQ: high, mid, low
Reverb , footswitchable
Power indicator lamp
Power switch - on/of
Tubes:
Pre-amp section: 3xECC83/12AX7 JJ
Power amp section: 2x 6L6 JJ
Rectifier tube GZ34 JJ
Circuit characteristics:
Point-to-point wired circuit, turret board, no PCB
Tube heaters power supply referenced to ground - no hum noise
No negative feedback
Cathode biased power tubes - no need to adjust bias
Tube rectifier GZ34
Reverb spring tank 8FB2A1B TAD
Fuse protection, 2 A
Power supply ~230-240V,50Hz, ~180W
