Embedded Files
Isometric view of the Bike Frame.
Structural conditions on the Bike Frame for analysis A.
Background
Background
This is an assignment for my ME-441 Computer Simulation and Analysis class. In the Computer Simulation and Analysis class ANSYS Workbench and Discovery AIM were used extensively to simulate. Instructions were provided, and sometimes the models, either from Creo Parametric or SolidWorks, were provided as well. Some assignments however need the objects to be modelled from scratch or modified before hand.
The assignment
The assignment
In this assignment, a bike frame made of titanium alloy undergoes three different stress analysis using ANSYS Workbench Static Structural. Under three different conditions, the bike's total deformation and Von Mises stress must be found. The three different analysis are identified as A, B, and C and their conditions can be seen below. In all three analysis, the total amount of force applied is 1424 N.
Results
Results
The results of the three different total deformation and Von Mises stress values can be seen below. This assignment was done to compare the same values under different conditions.
Structural conditions on the Bike Frame for analysis B.
Total deformation on the Bike Frame for analysis A.
Total deformation on the Bike Frame for analysis B.
Total deformation on the Bike Frame for analysis C.
Structural conditions on the Bike Frame for analysis C.
Von-Mises stress on the Bike Frame for analysis A.
Von-Mises stress on the Bike Frame for analysis B.
Von-Mises stress on the Bike Frame for analysis C.
Page updated
Report abuse