DIGITAL AUDIO PRODUCTION I

In this course, you’ll learn how to set up and operate audio equipment to use in your digital film productions. Multiple steps in the audio production process are covered - from proper workflow to ingesting your footage. By the end of the course, you’ll be able to capture quality audio, including dialogue, backgrounds, and sound effects to enhance future productions.

For some instructor recommended reading check here!

COURSE GEAR

CLAPPERBOARD

A clapperboard is one of the most recognizable tools on a film set. Not only does it work to identify your shots when recording a take, but, it also creates a sound used for syncing audio when the stick are clapped together.

E-IMAGE BOOM POLE

The E-Image boom pole has a three section design which will extend the length to 7 ft. The boom pole has a threaded end which fastens to the Auray shockmount in order to hold the Sony  ECM-674 Boom microphone for a complete setup.

SONY MDR-7506 HEADPHONES

Sony MDR-7506 are over the ear, flat response headphones which are ideal for monitoring sound from an audio recorder such as the Zoom H6.  They also fold up and are easy to store! 

ZOOM H6 AUDIO RECORDER

The Zoom H6 is a portable audio recorder with 4 dedicated XLR inputs. In any film production setup, an audio recorder is essential to getting great sound from booms or other mic sources.

PEARSTONE PM SERIES XLR M TO FEMALE XLR CABLE 25'

XLR cable is one of the most common type of audio cable you'll find on set.  It is cabable of carrying sound long distances and features locking connectors on both ends.


RODE NTG2 SHOTGUN MICROPHONE

The Rode NTG2 Boom microphone deliveres accurate and focused sound pickup due to its design.  A hidden battery compartment allows the microphone to be powered from an AA battery when phantom power from a mixer is unavailable.


ENELOOP AA BATTERIES

The Panasonic Eneloop AA rechargeable batteries and charger are the perfect compliment to the Zoom audio recorder.  You'll need four fully charged AA batteries to supply power to the Zoom H6.

SANDISK 32GB SD CARD

The SanDisk Extreme 32GB SD card is perfectly matched for the Zoom H6 audio recorder in terms of size and card speed.  This will allow for hours of audio recording  time while on set.


AURAY BOOM POLE HOLDER

The Boom Pole Holder has a unique shape which allows it to hold a boom pole in place, above the subject, using the Impact Grip Head mounted on a light stand. This is really helpful for keeping the microphone placement ideal for long takes and working with limited crew.


AURAY SHOCKMOUNT

The Auray Shockmount is designed to hold a boom microphone, like the Sony ECM-674 in your techkit.  The shockmount suspends the boom mic and helps eliminate handling noise when connected to the boom pole.

KUPO 40" RISER CSTAND TURTLE BASE KIT

The C-Stand is a staple in the grip department because it is capable of holding items in place to help modify or shape light.  C-stands are often used to hold bounce boards and reflectors but are sometimes used for mounting accessories like a boom pole holder in an audio setup.

IMPACT SANDBAG (x3)

Sandbags are synonymous with light stand safety. By adding a sandbag to a leg on the base of a light stand, the overall build becomes much more stable. Sandbags can also be used for a variety of other tasks on set including a knee pad when ground shots are required!


ZOOM PROTECTIVE CASE FOR ZOOM H6/REG

The Zoom H6 audio recorder is perfectly matched with the protective case when doing exterior shoots.  The case features a belt loop or backpack strap attachment so that you can wear the recorder if needed.

APPLE IPAD


Note: These are the filmmaking apps you should previously have installed: 

Movie Slate 8 

Final Draft Mobile

 Cinema P3 Camera Pro

Bluetooth+ for Blackmagic

Shot Designer 

Prompt Smart Pro

Pocket Call Sheet

APPLE MACBOOK PRO

Note:  The Apple Macbook Pro features an SD card reader on the right side. Use this to transfer your camera or audio card media to your computer.