USB DAQ device with 16 flexible I/O, and 4 dedicated digital I/O.  The flexible I/O can be configured as either digital or analog, thus providing up to 16 analog inputs, or up to 20 digital I/O. It also has two 10-bit analog outputs, up to 2 counters, and up to 2 timers. 

USB 다기능 DAQ

U3 시리즈는 간단한 아날로그 및 디지털 시스템 내에서 측정 및 제어를 위한 다목적 제품입니다.

I/O를 아날로그 또는 디지털로 구성 할 수 있는 옵션을 통해 사용자는 자신의 애플리케이션에 맞는 센서를 선택할 수 있습니다.

일반적으로 실험실 연구, 산업 제어 및 모니터링, 자동화 된 테스트 및 프로토 타입 개발에 제품이 활용될 수 있습니다. 또한 T7 시리즈 디바이스는 Lua 스크립트를 실행하여 독립형 운영이 가능합니다.

하드웨어 개요

LV (Low-Voltage) Version:

• 16 Flexible I/O (Digital Input, Digital Output, or Analog Input)

• Up to 2 Timers (Pulse Timing, PWM Output, Quadrature Input, ...)

• Up to 2 Counters (32-Bits Each)

• 4 Additional Digital I/O

• Up to 16 12-bit Analog Inputs (0-2.4 V or 0-3.6 V, SE or Diff.)

• 2 Analog Outputs (10-Bit, 0-5 volts)

• Supports SPI, I2C, and Asynchronous Serial Protocols (Master Only)

• Supports Software or Hardware Timed Acquisition

• Maximum Input Stream Rate of 2.5-50 kHz (Depending on Resolution)

• Capable of Command/Response Times Less Than 1 Millisecond

• Built-In Screw Terminals for Some Signals

• OEM Version Available

• USB 2.0/1.1 Full Speed Interface

• Powered by USB Cable

• Drivers Available for Windows, Linux, Mac and Pocket PC

• Examples Available for C/C++, VB, LabVIEW, Java, and More

• Includes USB Cable and Screwdriver

• Free Firmware Upgrades

• Money Back Guarantee

• Enclosure Size Approximately 3" x 4.5" x 1.2" (75mm x 115mm x 30mm)

• Rated for Industrial Temperature Range (-40 to +85 Degrees C)

HV (High-Voltage) Version:

Same features as the LV version except:

• First 4 Flexible I/O are Changed to Dedicated HV Analog Inputs.

• 4 HV Inputs have ±10 Volt or -10/+20 Volt Range.

• 12 LV Inputs (Flexible I/O) Still Available, for 16 Total Analog Inputs.

제품 구분

U3-HV vs U3-LV

U3-HV 아래와 같은 추가 기능을 제공한다.

• First 4 Flexible I/O are Changed to Dedicated HV Analog Inputs.

• 4 HV Inputs have ±10 Volt or -10/+20 Volt Range.

• 12 LV Inputs (Flexible I/O) Still Available, for 16 Total Analog Inputs.

OEM Versions

The U3-LV-OEM or U3-HV-OEM includes the board only without the enclosure and without most through-hole components.

기타 사항

• 각 구매 품목마다 장기간의 보증 서비스를 제공합니다. 

• 제조사에서 운영하는 포럼에 가입하여 각종 기술정보를 얻을 수 있습니다. 

• Free applications to configure, test, and log data to file

• Free examples: C/C++, C#, Delphi, Java, LabVIEW, MATLAB, Python, VB.NET and more...*

• Modbus TCP – Use any platform that supports TCP/IP, no driver required

• The free, cross-platform LabJack LJM Library – Extends/wraps the Modbus protocol for convenience

• Expansion boards and accessories – Add ±10V DACs, 4-20 mA inputs, terminal boards, relay boards and more...

• 일부 예제는 윈도우 전용으로 제공됩니다. 

Package Contents (Non-OEM)

• • U3 (-HV/-LV) unit itself in red enclosure

  • USB cable (6 ft / 1.8 m)

  • Screwdriver

  • Other package details: No software CD included. Download the software from labjack.com.

  • Retail packing (Package) size: 7" x 4.5" x 3"

  • Retail packing (Package) wt: 0.8lb

악세서리

• LJTick-VRef

• CB15 Terminal Board

• LM34CAZ Silicon Temperature Sensor

• EI1050 Digital Temperature/Humidity Probe