The LJTick-VRef is a Voltage reference accessory that outputs a stable 2.5V or 4.096V signal

VRef-25 Specs:

Voltage: 2.5V, Accuracy: ±0.08%, ±2mV

VRef-41 Specs:

Voltage: 4.096V ,Accuracy: ±0.08%, ±3.27mV

LabJack U6, T7의 DB37 커넥터를 위한 단자 제공, 드라이버 포함, LJTick 신호 조절 모듈 호환

LabJack 장치의 DB15 커넥터에 있는 12 개의 디지털 I/O 라인 나사 단자 제공

Analog input expansion board that adds 80 analog input channels. It can be connected to a U6, UE9,...

A three foot DB37 cable, useful for connections between the Mux80 and CB37 Terminal Board(s). Also... 

The LM34CAZ is ideal for cold-junction compensation(CJC) temperature measurements. Customers who... 

Provides a pair of 14-bit analog outputs with a range of +/- 10 volts. Plugs into any digital I/O... 

The LJTick-Resistance (LJTRx) makes it easy for LabJack devices to measure resistive sensors. This... 

A bidirectional logic shifting board for converting 3.3V logic down to 2.5V or 1.8V. There is also..

Converts 3.3V digital outputs to 5V digital outputs. Easily control 5V relays, or interface with a...

Allows 2 digital I/O lines to each control a relay or other moderate load. The 4-pin design plugs...

Signal-conditioning module provides two instrumentation amplifiers ideal for low-level signals such... 

Overview The LJTick-Divider (LJTD) is a signal conditioning module designed to take two single-... 

The LJTick-CurrentShunt (LJTCS) is a signal-conditioning module designed to convert a 4-20 mA...