2024 International Conference on Engineering Tribology and Applied Technology  (ICETAT 2024) 於2024年10月18日至20日假南投日月潭-馥麗溫泉大飯店舉辦，開幕式由臺灣磨潤科技學會理事長洪政豪終身講座教授及日本磨潤工程師學會理事長 Umehara教授致辭，也很榮幸邀請到法國國立應用科學院 (INSA Lyon) Daniel Nélias教授擔任大會演講貴賓，並於大會演講過後邀請所有與會貴賓一同合影留念。ICETAT是台灣磨潤相關領域學者與國內專家學者互相交流及發表研究成果之平台。此次研討會由臺灣磨潤科技學會、國立虎尾科技大學、建國科技大學、吳鳳科技大學及崑山科技大學共同主辦，由本聯盟、隆福行股份有限公司及上銀科技股份有限公司共同協辦。

本次會議共有來自日本、法國、馬來西亞和印度等10個國家，包括專家、學者200人以上參加。發表論文總篇數為115篇，其中85篇為口頭報告、 30篇為海報張貼。本次論文獎共頒發20個獎項，同時感謝聯盟會員上銀科技股份有限公司與隆福行股份有限公司捐贈10萬元作為獎金，得獎名單如下：

李克讓論文獎：獎金2萬元

題目：Tribological and Mechanical Properties of High-Entropy Alloy Nitrided Coatings Prepared from New Powder Hot-Pressed Sintering Targets and Applied to Nickel-Based Alloy Milling. (建國科技大學/國立成功大學)

最佳論文獎：獎金8千元

題目：Tribological Performance Analysis of Plastic-Scraped Workpieces with Low POP value. (國立虎尾科技大學)

Tool Wear and Surface Roughness in Orbital Drilling of Carbon Fiber Reinforced Polyester Composite Using Sinusoidal Eccentricity Strategy. (國立台灣科技大學)

The Generalized Wear Predicting Model for Diverse Wear Mechanisms: A Curve Fitting Approach Based on Experiment Parameters. (國立虎尾科技大學)

產學應用獎：國立虎尾科技大學 /東京城市大學/崑山科技大學 (獎金5千元)

題目：Study on Axial fluid-assisted Electropolishing Technology. (國立虎尾科技大學)

The Effects of Environmental Particles on the Wear and Pitting Behavior of Calcium-Based Grease. (國立虎尾科技大學)

Study on the Feasibility of Friction Stir Drilling of Nonwoven Sheets. (崑山科技大學)

Friction Reduction of Engine Bearings by Lubricating oil with Ultra-Fine Bubble. (日本東京城市大學)

優等：獎金5千元

題目：Transmission Study of High-Speed Journal Bearing with Herringbone Pattern. (國立虎尾科技大學)

Effect of Load and Laser Micro Texturing on Friction Properties of Paper Materials. (日本新潟大學)

Preparation of Bio-Based Composite Materials from Corn Husk Biomass and Chitosan Binder. (國立成功大學)

The Study of Lubricating Performance in Greases with Nanodiamond and Serpentine Additives. (崑山科技大學)

The Auxiliary Lubrication Effect of Polyolefin Resin and Porous Polymer Materials Used in Linear Slide Rails. (崑山科技大學)

佳作：獎金2仟元

題目：The Meshing Efficiency of Planetary Gear Reducer with Two Ring Gears. (國立虎尾科技大學/逢甲大學)

Effect of Surface Roughness on the Friction Moment in a Ball Bearing. (印度理工學院巴特那校區)

A Study on the effects of Cam Eccentricity and Cylinder Phase Angle on the Output Performance of a Twin-Cylinder Stirling Engine. (建國科技大學)

Tribological Properties of NbAl Coatings with Different Niobium Target Current Nitrogen and Acetylene Flux Rate, Respectively. (建國科技大學/國立成功大學)

Ductile Fracture Analysis of Lubricated Magnesium Alloy Sheet during Hemispherical Deep Drawing Process at Elevated Temperatures. (國立虎尾科技大學)

Development of Artificial Intelligence Real-Time Monitoring System for CNC Three-Axis Milling Machine Tools. (龍華科技大學/國立虎尾科技大學)

磨潤科技特別獎：獎金2仟元

題目：The Effects of Asperity Peaks Contacts and Couple Stress Lubricant on Transient Squeeze Elastohydrodynamic Lubrication with Rough Surface at Impact Loading. (國立臺東大學/國立臺東專科學校/崑山科技大學)

Analysis of The Effects of Deep Cryogenic Treatment on The Mechanical Properties and Wear of M390 Tool Steel. (國立勤益科技大學)

The Effect of Plasma Nitriding on the Anti-Corrosion Properties of W-DLC Films Deposited on 316L Steel. (大同大學/金屬工業研究發展中心)

An Investigation of Tribological Behavior between Die Steel and Aluminum Alloys in Reciprocal Line Contact under Minimum Quantity Lubrication with Nano Tungsten Disulfide. (國立臺灣海洋大學/國家原子能科技研究院)

最佳海報獎：

題目：Basic Properties and Enhancement of Coffee Grounds Oil as a Cutting Fluid. (國立虎尾科技大學)

The Effects of Asperity Peaks Contacts and Couple Stress Lubricant on Transient Squeeze Elastohydrodynamic Lubrication with Rough Surface at Impact Loading. (國立臺東大學/國立臺東專科學校/崑山科技大學)

Study of Transmission Performance of Ball Screw with Spacers. (國立虎尾科技大學)

Fundamental study on Laser Ablation Under Liquid with Fine Bubbles. (國立雲林科技大學/

國立臺北科技大學)

A Study on the effects of Cam Eccentricity and Cylinder Phase Angle on the Output Performance of a Twin-Cylinder Stirling Engine. (建國科技大學)

Discussion on the Tensile Strength of 3D Printing Materials and Infill Parameters. (建國科技大學)

Tribological and Electrochemical Properties of High Entropy Coatings with Different Content of Nitrogen Flux and Actual Application to Milling. (建國科技大學/國立成功大學/吳鳳科技大學)

Study on Friction Characteristics of Ni-B/Al2O3 Composite Coating Using Pulse Electrodeposition Parameters. (國防大學/敏實科技大學)

Development of Flexible Wearable Sensors with Tree Frog Bionic Structures and the Application in Fitness Sports. (國立成功大學/國防大學/國立陽明交通大學)

Tool Wear and Surface Roughness in Orbital Drilling of Carbon Fiber Reinforced Polyester Composite Using Sinusoidal Eccentricity Strategy. (國立臺灣科技大學)

Preparation and Glass Milling Performance of Copper-Based Micro-DiamondComposite Coatings Deposited on Brass Tools by Rotating Electroplating. (國立臺灣海洋大學/江蘇海洋大學) 

大會

Session 

晚宴與頒獎