Break down first spray at 15 min until close unless there is a line for sprays. 

• Remove 4 filters and rinse in back until water runs clear

• Run 2 wash cycles

• Fully clean & dry booth

• Lay out spa towel in the bottom of the booth and leave all filters out to dry overnight

• Wipe down the outside of the booth

• Turn off the water valve at the wall

• Mop floor

• Clean Mirror

• Ensure room supplies are fully stocked for the next day (blending cream, hairnet, towel, robe, bag, makeup wipes)

1: remove filters like normal

2: spray down entire booth (all sides, top, every corner and crack)

3: open the dash board -0000- click wash booth, you will run the rinse at least two times (three if we have had a lot of sprays), spray down booth in between washes.

4: wipe down entire booth including the top areas, there should be no solution residue anywhere after it is wiped down.

5: take nozzles off, wipe down entire area of where the nozzles are

6: rinse nozzles in sink until there is no solution on them 

7: soak nozzles in a black pan overnight, fill with water, dawn soap, and a splash of alcohol