Embedded Files
Boxlight Projector
Boxlight Projector
What is an Interactive Projector?
What is an Interactive Projector?
- Converts any flat surface into an interactive workspace.
- Control your computer screen from the board instead of using a mouse.
- Anything that can be accessed from your computer can be displayed.
Projector Remote
Projector Remote
All campuses except Acton and Hastings
Acton and Hastings
Pen Functionality
Pen Functionality
- Use with any program.
- Annotate with any program - similar to a transparency.
- Single Click (tap once on board)
- Double Click (tap twice on board)
- Right Click (tap > hold > release)
- Click and drag (keep constant pressure and drag)
Pen Storage
Pen Storage
All campuses except Acton and Hastings
Acton and Hastings
On/Off button
When the light touches a surface it runs down the battery.
This is a "Dummy" pen for those moments you need the "feel" of a pen, otherwise you can use your finger.
Make the board interactive
Make the board interactive
The USB cable must be plugged into the laptop and the wall plug in order for the board to be interactive.
This is the 1st item to check when troubleshooting why the pen is not working properly with the board.
Required Resolution to project on the board
Required Resolution to project on the board
In order for the interactive pen to work properly, the resolution MUST be set to 1280 X 800 while the HDMI cable is plugged in to the Toshiba.
This is the 2nd setting to check when troubleshooting why the pen is not working properly with the board.
- Right click on desktop. (If setting this for projector resolution, plug in projector first.)
- Choose Graphics Options.
- Choose Resolution.
- Set to resolution shown above.
Calibration
Calibration
(for all campuses except Acton and Hastings - these campuses will create a HelpDesk ticket if the board needs to be calibrated.)
Calibration aligns the tip of the pen with the target points on the screen.
Green chain link in the system tray
- indicates a good connection
- right click to select Calibration
Red chain link in the system tray
- indicates loss of connection
- plug in the USB cable
- Right click on green chain link.
- Choose Calibration.
- Turn interactive pen on.
- Tap pen on the targets showing on the board after you select Calibration.
Oktopus vs. ActivInspire
Oktopus vs. ActivInspire
Oktopus comes free with Boxlight Projectors.
- Annotate over desktop
- Math, English, Science & Geography Tools
ActivInspire is a software purchased by the district.
- Annotate over desktop
- Math, camera, sound and recording tools
- Class Flow community
Report abuse