Course Preparation Files
Introduction
Below you will find the files that require production to implement the course. These items require assembly and should be completed prior to starting the course.
Preparation Needed for the Courses:
AMP-IT-UP Engineering Design Process - Paper size - 42in Poster size
AMP-IT-UP Engineering Design Process Log Checklist Poster - Paper size - 42in poster file
6th Grade Depco AMP Catapults - Assembly instruction slides
6th Grade 3D printed Catapults attachment - stl for 3D printing
6th Grade 3D printed Catapult projectile - stl for 3D printing
6th Grade landing board - Two steps: 1) Drawing Grid on board Start at 1:45 into video 2) Applying Hook Velcro to board
6th Grade Large cubes for Visualization instruction - after constructing 4x4x4 box: print, cut, and tape these files to box. T/L/F and B/R/B
8th Grade bio-bot assembly - Model Build instructions
NXT - LEGO Digital Designer - pdf
EV3 - LEGO Digital Designer - pdf - ppt(updated version)
8th Grade striped board (back of 6th grade board) - Assembly video Beginning to 1:45
8th Grade 3D printed bio-bot legs - stl for 3D printing
8th Grade 3D printed bio-bot feet - stl for 3D printing
8th Grade 3D printed bio-bot feet material tray - bottom stl - top stl
Items that will need assembly after production of 3-d parts:
The Catapult attachment should be attached with bolt & nut to the catapult arm - In Catapult Assembly file
The Catapult projectile should be covered with adhesive back loop velcro - Assembly instruction slides
Bio-Bot feet (120 left as printed) 120 feet covered with materials (use tray to assist) - Assembly instruction slides
48 with felt
36 with sandpaper
36 with balloon