The  Graphtec CE6000-60 Plus is a Vinyl Cutter that can can be used in a variety of tasks and creations

1. Turn on the Vinyl Cutter using the switch on the left of the machine

2. Load the media onto the rack, if not already loaded

3. Insert the media into  the cutter

4. Make sure  the far left roller is beneath the blue line and on the edge of the media

5. Ensure the right roller is beneath the large blue line and is close to the edge of the media

6. when finished, pull the handle behind the right side of the machine towards you.

7. Ensure the design is uploaded to the machine (see Software for instructions)

8. Once the design is uploaded, select option 1; Roll - 1 Front Edge

9. When selected the media will begin to roll out, after a few seconds, press the FAST button

10. Once pressed, the cutter will start cutting onto the media until your project is completed

11. When completed, push the lever behind the right side of the machine down, or away from you

12. give the machine a few seconds until you stop hearing the buzzing sound

13. Then, using scissors,  cut your design from the roll of media 

1. Ensure you have the design you want to cut out or  create as a DXF file

2. Open the Graph Tec Pro studio app on the computer next to the Vinyl cutter

3. To Import your design go FIle -> Import -> (Search For File) -> Import

4. Arrange your imported design to fit properly and maximize space

5. Once completed, press the Cut/Plot button

6. Set the dimension of the roll so that it fits properly and matches the media roll loaded into the machine

7. Once finished, and the Vinyl cutter is on and prepped, press, Send

8. Then continue with Step 8 of Operation