NG and LPG Usage

Natural Gas (NG) Usage for Common Appliances

Natural Gas is a common energy source for various household appliances. The consumption of natural gas for these appliances can vary depending on factors like the appliance's size, efficiency, and usage patterns. Here's a general overview of natural gas usage for common household appliances:

Natural Gas Furnace: A typical residential gas furnace consumes between 40,000 and 100,000 British Thermal Units (BTUs) per hour during operation. The actual consumption depends on the furnace's size and efficiency.

Natural Gas Water Heater: A standard tank-type gas water heater can consume around 30,000 to 50,000 BTUs per hour. Tankless (on-demand) gas water heaters vary widely, with some models consuming 150,000 BTUs or more when operating at peak capacity.

Gas Stove or Range: Gas stoves or ranges generally have burners that can range from 5,000 to 15,000 BTUs per hour each, depending on the size and design of the burners. The total consumption depends on how many burners are in use.

Gas Oven: Gas ovens typically consume about 18,000 to 25,000 BTUs per hour when preheating and then lower levels while maintaining the set temperature.

Gas Dryer: Gas dryers use around 20,000 to 25,000 BTUs per hour, depending on the model and capacity.

Gas Fireplace: The gas consumption of a gas fireplace can vary significantly based on its size and heat output. Some gas fireplaces can consume 20,000 to 60,000 BTUs per hour or more.

Gas Grill: Outdoor gas grills typically have burners that range from 10,000 to 30,000 BTUs each, depending on the grill's size and design.

Pool Heater: Gas pool heaters can have varying BTU ratings, often ranging from 100,000 to 400,000 BTUs per hour or more, depending on the pool's size and desired heating rate.

Clothes Washer and Dishwasher: These appliances do not typically use natural gas. They are usually powered by electricity.

Keep in mind that these are rough estimates, and actual gas usage can vary based on factors such as appliance efficiency, the climate in which you live, and your usage habits. Natural gas consumption is typically measured in therms or cubic feet (CCF), and your gas utility bill will provide more accurate information on your actual usage. If you want to determine your appliance's specific gas consumption, you can refer to the manufacturer's specifications or consult with a professional energy auditor.

Natural Gas Usage for an Instant (Tankless) Hot Water Heater: Can vary depending on several factors, including the heater's size, efficiency, the temperature rise required, and usage patterns. Instant hot water heaters are designed to heat water on demand, so they only consume gas when hot water is being used. Here's a general guideline:

Small Residential Units: Smaller tankless water heaters designed for single fixtures (e.g., point-of-use units for a single shower or sink) typically have a gas input rating of around 30,000 to 60,000 British Thermal Units per hour (BTU/hr). These units are suitable for low to moderate hot water demands in a specific location.

Medium Residential Units: Medium-sized tankless water heaters designed to supply hot water to multiple fixtures in a home may have gas input ratings of 120,000 to 199,000 BTU/hr. These units are capable of providing hot water to several fixtures simultaneously.

Large Residential or Commercial Units: Larger tankless water heaters designed for larger homes or commercial applications can have gas input ratings of 200,000 BTU/hr or more. These units are capable of handling high hot water demand scenarios.

The actual gas usage during operation will depend on factors like the temperature of the incoming water, the desired hot water temperature, and the flow rate of the water. For example, if you're in a colder climate and want to achieve a high hot water temperature, the tankless heater will need to work harder and consume more gas.

LPG Usage for Common Appliances

Liquefied Petroleum Gas (LPG), which includes propane and butane, is commonly used as a fuel source for various household appliances. The consumption of LPG for these appliances can vary depending on factors such as appliance size, efficiency, and usage patterns. Here's a general overview of LPG usage for common household appliances:

LPG Furnace/Heater: A typical residential LPG furnace or heater consumes around 35,000 to 100,000 British Thermal Units (BTUs) per hour during operation. The actual consumption depends on the size and efficiency of the heating system.

LPG Water Heater: LPG water heaters, whether tank-type or tankless, consume around 30,000 to 80,000 BTUs per hour. Tankless units may have a higher BTU rating when operating at maximum capacity.

LPG Stove or Range: Gas stoves or ranges using LPG typically have burners that range from 5,000 to 15,000 BTUs per hour each, depending on the size and design of the burners. The total consumption depends on how many burners are in use.

LPG Oven: LPG ovens typically consume about 18,000 to 25,000 BTUs per hour when preheating, with lower levels of consumption when maintaining the set temperature.

LPG Clothes Dryer: LPG dryers use around 15,000 to 20,000 BTUs per hour, depending on the model and capacity.

LPG Fireplace: LPG fireplaces can vary in terms of heat output, but they typically consume around 20,000 to 40,000 BTUs per hour or more, depending on the design and size of the fireplace. 

Outdoor Grill: LPG-powered outdoor grills typically have burners ranging from 10,000 to 30,000 BTUs each, depending on the grill's size and design.

LPG Generator: If you have a backup generator that runs on LPG, its consumption can vary widely depending on its capacity and the load it needs to support.

Refrigerator and Electric Appliances: Refrigerators, as well as most electric appliances like washing machines and dishwashers, do not use LPG. They are powered by electricity.

It's essential to note that these are approximate estimates, and actual LPG usage can vary based on factors such as the appliance's efficiency, local climate, and how often the appliance is used. LPG consumption is typically measured in gallons or pounds, and your LPG supplier can provide more accurate information about your actual usage. If you want to determine your appliance's specific LPG consumption, you can refer to the manufacturer's specifications or consult with a professional for a more accurate assessment.  

LPG Instant Hot Water Heaters: The BTU (British Thermal Unit) ratings for common LPG (liquefied petroleum gas) instant hot water heaters for households can vary depending on the model and manufacturer. Typically have BTU ratings in the range of 30,000 to 200,000 BTUs per hour. Here's a breakdown of BTU ratings based on the size and capacity of the water heater:

Small Tankless Water Heaters: These units are designed for point-of-use applications, such as a single sink or a small bathroom. They usually have BTU ratings in the range of 30,000 to 60,000 BTUs per hour.

Medium Tankless Water Heaters: These units are suitable for providing hot water to multiple fixtures, such as a shower and a sink, simultaneously. Their BTU ratings typically fall in the range of 100,000 to 150,000 BTUs per hour.

Large Tankless Water Heaters: These high-capacity units are capable of providing hot water to multiple fixtures throughout a larger household. They can have BTU ratings ranging from 150,000 to 200,000 BTUs per hour or more.

It's essential to choose the right size and capacity of an LPG instant hot water heater based on your household's hot water demands. Larger households with more fixtures will require a higher BTU rating to meet the hot water needs effectively.

Please note that these are approximate ranges, and actual BTU ratings may vary between different models and brands of LPG instant hot water heaters. When selecting a unit, it's essential to consult the manufacturer's specifications and consider factors such as the incoming water temperature and the desired flow rate to ensure it meets your specific requirements.

https://www.energystar.gov/products

https://www.energystar.gov/productfinder/