The students of 5th B and 5th A have made the Ultrasonic Distance Meter robot, as we always do, with the Lego Spike set, and we have to follow some steps. Here I leave you all the steps that you need to be taken so that everything turns out perfectly.The objetive of this project is for the robot to make a sound when you place an object about 5 cm away from it.
1.The first step is the creation,we have to do the robot with the pieces that the lego spike contain into the box and also with the ultrasonic detector.Where I'm going to put a picture and in the picture are some kids doing the ultrasonic distance meter.
2. The second step is to program with the blocks on the left. These blocks must be joined together to achieve the objective exactly as required by School 4.0 and with all the necessary requirements. I haven't found the exact programming, but I'm leaving this here so you can get an idea.
3.The third step is so easy you have to connect the robot to the computer and test the robot and check that everything is working properly, and if anything is wrong, replace it.
4.The fourth and the last step It's about presenting the robot, and obviously it has to be in English. To learn the presentation faster, my group created a dialogue with all the things each person had to say. At the top of the page, there's an example for your reference.