AUTHENTICATION ON WINDOWS XP.
Click start button on lower left corner of your
computer. Right click My Network Places and choose Properties.
Right click Wireless
Network Connection and choose Properties
to view Wireless Network Connection
Properties as shown below in Fig. a
In the General tab,
select Internet Protocol (TCP/IP) and
click on Properties button
4) In the General
tab, choose Obtain an IP address
automatically; also choose Obtain
DNS Server address automatically as shown in Fig. b. Click Ok to save settings.
5) Click on the Wireless
Networks tab. Check Use Windows to
configure my wireless network settings. Under Preferred Networks click on Add buttons as shown in Fig. c
6) In Association
tab, type STUDENTS for student
wireless or STAFF for staff wireless
in Network name (SSID): field.
7) Under Wireless
network key choose WPA2; for Network Authentication: and AES for Data encryption as shown in
8) Click on Authentication
tab. Choose Protected EAP (PEAP) for
EAP type: as shown in Fig. e and click Properties
9) Leave Validate server certificate unchecked. Choose Secured password (EAP-MSCHAP v2) for Select Authentication Method:. Also, check Enable Fast
Reconnect as shown in Fig. f and click on Configure.
10) Uncheck Automatically
use my Windows logon name and password (and domain if any) and click Ok to
save and exit.Fig. g
11) Notice that STUDENT/STAFF
has been added to your Preferred networks.
12) Select STUDENT/STAFF
wireless network and click Connect
14) Enter your registered student number as User name
and PIN as Password and click Ok to
login for STUDENT or staff ID and PIN to login to STAFF Fig. k
Click OK to all the open windows - you have now
completed the configuration of your client and should be ready to connect now.