Retired Hidden‎ > ‎

Nano Undershield


Nano Undershield




**Retired**

The Nano Undershields have been retired. Please take a look at the Micro Magician instead. This page is for reference only.












Description

The Arduino Nano Undershields are simply perfect for small, simple robots with everything you need, and nothing you don't. Start with an Arduino Nano, featuring an Atmega328, on-board volt regulator and on-board USB. Next, add the Undershield with connections for sensors, motors and servos. Mix in the ability to supply power in a lot of different configurations and you got yourself a gosh-darn-good board for almost any robot. Let's see what we got here:


UnderShield Classic
  • L293D Motor Driver
  • Separate connections for data power in and motor power in
  • Connections for 2 servos (via 3-pin header)
  • Connections for 2 ADC's (via 3-pin header)
  • Connections for 1 Digital Sensor (via 3-pin header)
  • 3-Pin headers can be powered by on-board regulator or external power
  • All other pins accessible via female headers
  • Nano can be powered by its own on-board regulator as well as external regulated power, allowing the Nano to be run at voltage levels lower than 5v
  • Real-life mounting holes that are actually big enough for real screws! Fits 2-56, 4-40 and M3 "standard" PCB stand-offs
  • A footprint just slightly bigger than 1"x2"
UnderShield with Pins:
  • L293D Motor Driver
  • Separate connections for motor and data power in
  • All I/O pins broken out to 3-pin headers
  • All I/O pins accessible via female headers
  • Nano can be powered by its own on-board regulator as well as external regulated power, allowing the Nano to be run at voltage levels lower than 5v
  • Real-life mounting holes that are actually big enough for real screws! Fits 2-56, 4-40 and M3 "standard" PCB stand-offs
  • A footprint just slightly bigger than the Classic


Comments