IEC

  • IEC 60027 Letter symbols to be used in electrical technology...
  • IEC 60034 Rotating electrical machinery
  • IEC 60038 IEC Standard Voltages
  • IEC 60044 Instrument transformers
    • IEC 60044-1 Current transformers
  • IEC 60050 International Electrotechnical Vocabulary
  • IEC 60062 Marking codes for resistors and capacitors
  • IEC 60063 Preferred number series for resistors and capacitors
  • IEC 60065 Audio, video and similar electronic apparatus - Safety requirements
  • IEC 60068 Environmental Testing
  • IEC 60071 Insulation Co-ordination
  • IEC 60073 Basic Safety principles for man-machine interface, marking and identification
  • IEC 60076 Power Transformers
  • IEC 60079 Parts 1-14 Electrical Installations in Hazardous Areas
  • IEC 60085 Electrical insulation
  • IEC 60086 Primary batteries
  • IEC 60094 Magnetic tape sound recording and reproducing systems
    • IEC 60094-5 Electrical magnetic tape properties
    • IEC 60094-6 Reel-to-reel systems
    • IEC 60094-7 Cassette for commercial tape records and domestic use
  • IEC 60096 Radio-frequency cables
  • IEC 60098 Rumble measurement on Vinyl Disc Turntables
  • IEC 60099-4 Metal oxide Surge arresters without gaps for AC systems
  • IEC 60099-5 Selection and Application Recommendations
  • IEC 60134 Absolute maximum and design ratings of tube and semiconductor devices
  • IEC 60137 Bushings for alternating voltages above 1000V
  • IEC 60146 Semiconductor Converters
  • IEC 60169 Radio-frequency connectors
  • IEC 60179 Replaced by IEC 60651 Replaced by IEC 61672-1 Ed.1.0 (2002) Sound Level Meters
  • IEC 60183 Guide to the selection of high voltage cables
  • IEC 60204 Safety of machinery
  • IEC 60214 On-load tap changers
  • IEC 60228 Conductors of insulated cables
  • IEC 60233 Tests on Hollow Insulators for use in Electrical Equipment
  • IEC 60238 Edison screw lampholders
  • IEC 60245 Rubber-Insulated Cables
  • IEC 60255 Electrical Relays
  • IEC 60268 Sound system equipment
    • IEC 60268-1 General
    • IEC 60268-2 Explanation of general terms and calculation methods
    • IEC 60268-3 Amplifiers
    • IEC 60268-4 Microphones
    • IEC 60268-5 Loudspeakers
    • IEC 60268-6 Auxiliary passive elements
    • IEC 60268-7 Headphones and earphones
    • IEC 60268-8 Automatic gain control devices
    • IEC 60268-9 Artificial reverberation, time delay and frequency shift equipment
    • IEC 60268-10 Peak programme level meters
    • IEC 60268-11 Application of connectors for the interconnection of sound system components
    • IEC 60268-12 Application of connectors for broadcast and similar use
    • IEC 60268-13 Listening tests on loudspeakers
    • IEC 60268-14 Circular and elliptical loudspeakers; outer frame diameters and mounting dimensions
    • IEC 60268-16 Objective rating of speech intelligibility by speech transmission index
    • IEC 60268-17 Standard volume indicators
    • IEC 60268-18 Peak programme level meters - Digital audio peak level meter
  • IEC 60269 Low voltage fuses
    • IEC 60269-1 General requirements
    • IEC 60269-2 Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)
    • IEC 60269-3 Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)
    • IEC 60269-4 Supplementary requirements for fuse-links for the protection of semiconductor devices
  • IEC 60270 High-Voltage Test Techniques - Partial Discharge Measurements
  • IEC 60287 Calculation of permissible current in cables at steady state rating
  • IEC 60296 Mineral Insulating oils for transformers & switchgear
  • IEC 60297 19-inch rack
  • IEC 60309 Plugs, socket-outlets and couplers for industrial purposes
  • IEC 60317 Specifications for particular types of winding wires
  • IEC 60320 Appliance couplers for household and similar general purposes (IEC connector)
  • IEC 60331 Tests for Electric Cables under Fire Conditions
  • IEC 60335-1 Safety of electrical household appliances; Part 1
    • IEC 60335-2-2 Safety of Household and similar elecrical appliances; Part 2-2: Particular requirements for Vacuum Cleaners and Water-suction Cleaning Appliances
    • IEC 60335-2-3 Safety of Household and similar elecrical appliances; Part 2-3: Particular requirements for Electric Irons
    • IEC 60335-2-5 Safety of Household and similar electrical appliances; Part 2-5: Particular requirements for dishwashers
    • IEC 60335-2-6 Safety of Household and similar electrical appliances; Part 2-6: Particular Requirements for Stationary Cooking Ranges, Hobs, Ovens and Similar Appliances
    • IEC 60335-2-7 Safety of Household and similar electrical appliances; Part 2-7: Particular Requirements for Washing Machines
    • IEC 60335-2-8 Safety of Household and similar electrical appliances; Part 2-8: Particular requirements for Shavers, Hair Clippers and similar appliances
    • IEC 60335-2-9 Safety of Household and similar electrical appliances; Part 2-9: Particular requirements for Grills, Toasters and similar portable cooking appliances
    • IEC 60335-2-10 Safety of Household and similar electrical appliances; Part 2-10: Particular requirements for Floor Treatment Machines and Wet Scrubbing Machines
    • IEC 60335-2-11 Safety of Household and similar electrical appliances; Part 2-11: Particular Requirements for Tumbler Dyers
    • IEC 60335-2-12 Safety of Household and similar electrical appliances; Part 2-12: Particular requirements for Warming Plates and similar appliances
    • IEC 60335-2-13 Safety of Household and similar electrical appliances; Part 2-13: Particular requirements for Deep Fat Fryers, Frying Pans and similar appliances
    • IEC 60335-2-14 Safety of Household and similar electrical appliances; Part 2-14: Particular requirements for Kitchen Machines
    • IEC 60335-2-15 Safety of Household and similar electrical appliances; Part 2-15: Particular requirements for Appliances for Heating Liquids
    • IEC 60335-2-16 Safety of Household and similar electrical appliances; Part 2-16: Particular requirements for Food Waste Disposers
    • IEC 60335-2-17 Safety of Household and similar electrical appliances; Part 2-17: Particular requirements for Blankets, Pads, Clothing and similar flexible heating appliances
    • IEC 60335-2-21 Safety of Household and similar electrical appliances; Part 2-21: Particular Requirements for Storage Water Heaters
    • IEC 60335-2-23 Safety of Household and similar electrical appliances; Part 2-23: Particular Requirements for Appliances for Skin or Hair Care
    • IEC 60335-2-24 Safety of Household and similar electrical appliances; Part 2-24: Particular Requirements for refrigerating appliances, ice-cream appliances and ice makers
    • IEC 60335-2-25 Safety of Household and similar electrical appliances; Part 2-25: Particular Requirements for Microwave Ovens
    • IEC 60335-2-29 Safety of Household and similar electrical appliances; Part 2-29: Particular requirements for Battery Chargers
    • IEC 60335-2-30 Safety of Household and similar electrical appliances; Part 2-30: Particular requirements for Room Heaters
    • IEC 60335-2-32 Safety of Household and similar electrical appliances; Part 2-32: Particular Requirements for Massage Appliances
    • IEC 60335-2-35 Safety of Household and similar electrical appliances; Part 2-35: Particular Requirements for Instantaneous Water Heaters
    • IEC 60335-2-36 Safety of Household and similar electrical appliances; Part 2-36: Particular Requirements for Commercial Electric Cooking Ranges, Ovens, Hobs and Hob Elements
    • IEC 60335-2-37 Safety of Household and similar electrical appliances; Part 2-37: Particular Requirements for Commercial Electrical Deep Fat Fryers
    • IEC 60335-2-38 Safety of Household and similar electrical appliances; Part 2-38: Particular Requirements for Commercial Electrical Griddles and Griddle Grills
    • IEC 60335-2-40 Safety of Household and similar electrical appliances; Part 2-40: Particular Requirements for Electrical Heat Pumps, Air-Conditioners and Dehumidifiers
    • IEC 60335-2-41 Safety of Household and similar electrical appliances; Part 2-41: Particular Requirements for Pumps for liquids having a temperature not exceeding 35 degrees C
    • IEC 60335-2-42 Safety of Household and similar electrical appliances; Part 2-42: Particular Requirements for Commercial Electric Forced Convection Ovens, Steam Cookers and Steam-Convection Ovens
    • IEC 60335-2-43 Safety of Household and similar electrical appliances; Part 2-43: Particular Requirements for Clothes Dryers and Towel Rails
    • IEC 60335-2-44 Safety of Household and similar electrical appliances; Part 2-44: Particular Requirements for Ironers
    • IEC 60335-2-45 Safety of Household and similar electrical appliances; Part 2-45: Particular Requirements for Portable Heating Tools and Similar Appliances
    • IEC 60335-2-47 Safety of Household and similar electrical appliances; Part 2-47: Particular Requirements for Commercial Electric Boiling Pans
    • IEC 60335-2-48 Safety of Household and similar electrical appliances; Part 2-48: Particular Requirements for Commercial Electric Grillers and Toasters
    • IEC 60335-2-49 Safety of Household and similar electrical appliances; Part 2-49: Particular Requirements for Commercial Electric Hot Cupboards
    • IEC 60335-2-51 Safety of Household and similar electrical appliances; Part 2-51: Particular Requirements for Stationary Circulation Pumps for Heating and Service Water Installations
    • IEC 60335-2-52 Safety of Household and similar electrical appliances; Part 2-52: Particular Requirements for Oral Hygiene Appliances
    • IEC 60335-2-54 Safety of Household and similar electrical appliances; Part 2-54: Particular Requirements for Surface-Cleaning Appliances Employing Liquids
    • IEC 60335-2-56 Safety of Household and similar electrical appliances; Part 2-56: Particular Requirements for Projectors and Similar Appliances
    • IEC 60335-2-58 Safety of Household and similar electrical appliances; Part 2-58: Particular Requirements for Commercial Electric Dishwashing Machines
    • IEC 60335-2-62 Safety of Household and similar electrical appliances; Part 2-62: Particular Requirements for Commercial Electric Rinsing Sinks
    • IEC 60335-2-64 Safety of Household and similar electrical appliances; Part 2-64: Particular Requirements for Commercial Electric Kitchen Machines
    • IEC 60335-2-67 Safety of Household and similar electrical appliances; Part 2-67: Particular Requirements for Floor Treatment and Floor Cleaning Machines, for Industrial and Commercial Use
    • IEC 60335-2-68 Safety of Household and similar electrical appliances; Part 2-68: Particular Requirements for Spray Extraction Appliances, for Industrial and Commercial Use
    • IEC 60335-2-69 Safety of Household and similar electrical appliances; Part 2-69: Particular Requirements for Wet and Dry Vacuum Cleaners, Including Power Brush, for Industrial and Commercial Use
    • IEC 60335-2-74 Safety of Household and similar electrical appliances; Part 2-74: Particular Requirements for Portable Immersion Heaters
    • IEC 60335-2-89 Safety of Household and similar electrical appliances; Part 2-89: Particular Requirements for Commercial Refrigerating Appliances with an incorporated or remote refrigerant condensing unit or compressor
    • IEC 60335-2-90 Safety of Household and similar electrical appliances; Part 2-90: Particular Requirements for Commercial Microwave Ovens
  • IEC 60364 Electrical installations of buildings
  • IEC 60386 Method of measurement of speed fluctuations in sound recording and reproducing equipment
  • IEC 60417-1 Graphical symbols for use on equipment; Part 1: Overview and Application
  • IEC 60439 Low voltage switchgear and controlgear assemblies; Part 1: Type-Tested and partially type tested assemblies
  • IEC 60445 Basic and safety principles for man-machine interface
  • IEC 60446 Wiring colours
  • IEC 60502 Power cables with extruded insulation and their accessories for rated voltages from 1KV up to 30KV
  • IEC 60529 Degrees of protection provided by enclosures (IP Code)
  • IEC 60571 Electronic equipment used on rail vehicles
  • IEC 60574 Audio-visual, video and television equipment and systems
  • IEC 60598-1 Luminaires: General Requirements
  • IEC 60559: 1989 Binary floating-point arithmetic for microprocessor systems (equivalent to IEEE 754-1989)
  • IEC 60694 Common clauses for high-voltage switchgear and control gear standards
  • IEC 60601-1 Medical Electrical Equipment; Part 1: General Requirements for Safety.
    • IEC 60601-1-1 Medical electrical equipment; Part 1-1: General requirements for safety - Collateral standard: Safety requirements for medical electrical system.
    • IEC 60601-1-2 Medical electrical equipment; Part 1-2 : General requirements for safety - Section 2: Collateral standard: Electromagnetic compatibility - Requirements and tests.
    • IEC 60601-1-4 Medical Electrical Equipment; Part 1-4: General Requirements for Safety - Collateral Standard. Programmable Electrical Medical Systems.
    • IEC 60601-1-8 Medical Electrical Equipment; Part 1-8: General Requirements for Safety - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
    • IEC 60601-1-9 Medical electrical equipment; Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design
    • IEC 60601-1-10 Medical electrical equipment; Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers
    • IEC 60601-2-33 Medical electrical equipment; Part 2-33: Particular requirements for basic safety and essential performance of magnetic resonance equipment for medical diagnosis
    • IEC 60601-2-37 Medical electrical equipment; Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
  • IEC 60603 Connectors for frequencies below 3 MHz for use with printed boards
    • IEC 60603-2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2.54 mm (0.1 in) with common mounting features
    • IEC 60603-7-1: Connectors for electronic equipment; Part 7-1: Detail specification for 8-way, shielded free and fixed connectors with common mating features, with assessed quality
    • IEC 60603-7-2: Connectors for electronic equipment; Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
    • IEC 60603-7-4: Connectors for electronic equipment; Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
    • IEC 60603-7-5: Connectors for electronic equipment; Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
    • IEC 60603-7-7: Connectors for electronic equipment; Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 600 MHz
  • IEC 60617 Graphical symbols for diagrams
    • IEC 60617-12 Graphical symbols for diagrams; Part 12: Binary logic elements (Logic gates)
  • IEC 60651 Sound level meters (status is withdrawn)
  • IEC 60694 High-voltage switchgear. Common specifications
  • IEC 60715 Dimensions of low-voltage switchgear and controlgear. Standardised mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations.
  • IEC 60721 Classification of environmental conditions
  • IEC 60726 Dry type power transformers
  • IEC 60747 Semiconductor devices; Part 1: General
    • IEC 60747-2 Discrete semiconductor devices and integrated circuits; Part 2: Rectifier Diodes
    • IEC 60747-4 Discrete semiconductor devices; Part 4: Microwave diodes and transistors
    • IEC 60747-5-4 Discrete semiconductor devices; Part 5-4: Optoelectronic devices Semiconductor lasers
    • IEC 60747-6 Discrete semiconductor devices; Part 6: Thyristors
    • IEC 60747-7 Discrete semiconductor devices; Part 7: Bipolar transistors
    • IEC 60747-7-5 Discrete semiconductor devices; Part 7: Bipolar transistors for power switching applications
    • IEC 60747-8 Discrete semiconductor devices; Part 8: Field-effect transistors
    • IEC 60747-8-4 Discrete semiconductor devices; Part 8-4: Metal-oxide-semiconductor field-effect transistors (MOSFETs) for power switching applications
    • IEC 60747-9 Discrete semiconductor devices; Part 9: Insulated-gate bipolar transistors (IGBTs)
    • IEC 60747-12-1 Discrete semiconductor devices; Part 12-1: Optoelectronic devices - Blank detail specification for light emitting infrared emitting diodes with/without pigtail for fibre optic systems and sub-systems
    • IEC 60747-12-3 Discrete semiconductor devices; Part 12-3: Optoelectronic Devices - Blank detail specification for Light-Emitting Diodes (LEDs) for display applications
  • IEC 60748 Semiconductor devices - integrated circuits
  • IEC 60774 VHS/S-VHS video tape cassette system
  • IEC 60793 Optical fibres
  • IEC 60825 Laser safety
  • IEC 60812 - International Standard on Fault Mode and Effects Analysis
  • IEC 60870 Telecontrol equipment and systems
    • IEC 60870-1 General considerations
    • IEC 60870-2 Operating conditions
    • IEC 60870-3 Interfaces (electrical characteristics)
    • IEC 60870-4 Performance requirements
    • IEC 60870-5 Transmission protocols
      • IEC 60870-5-101 Companion standard for basic telecontrol tasks
      • IEC 60870-5-102 Companion standard for the transmission of integrated totals in electric power systems
      • IEC 60870-5-103 Companion standard for the informative interface of protection equipment
      • IEC 60870-5-104 Network access for IEC 60870-5-101 using standard transport profiles
    • IEC 60870-6 Telecontrol protocols compatible with ISO and ITU-T recommendations
  • IEC 60874 Connectors for optical fibres
  • IEC 60884 Plugs and socket-outlets for household and similar purposes

Defines general requirements of such plugs and sockets. The many particular forms used in different countries are listed in IEC/TR 60083 (formerly IECEE CEE-7).

  • IEC 60898-1 Electrical accessories. Circuit breakers for overcurrent protection for household and similar installations. Part 1: Circuit-breakers for a.c. operation (IEC 60898-1:2002, modified)
  • IEC 60906 IEC system of plugs and socket-outlets for household and similar purposes

This is the system the IEC recommends as the worldwide standard for countries using 220-240 V AC. Switzerland uses already a very similar plug.

This is the system used in the United States, Canada, and Japan.

    • IEC 60906-3: SELV plugs and socket-outlets, 16 A 6V, 12 V, 24 V, 48 V, AC and DC
  • IEC 60908 Compact disk digital audio system
  • IEC 60921 Ballasts for tubular fluorescent lamps - Performance requirements
  • IEC 60929 AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
  • IEC 60942 Electroacoustics - Sound calibrators
  • IEC 60945 Maritime Navigation and Radiocommunication Equipment and Systems - General Requirements - Methods of Testing and Required Test Results
  • IEC 60947 Standards for low-voltage switchgear and controlgear
  • IEC 60950 Safety of information technology equipment
  • IEC 61000 Electromagnetic compatibility (EMC)
    • IEC 61000-2-1: Guide to electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems
    • IEC-61000-2-2: Environment - Compatibility Levels for Low-Frequency Conducted Disturbances and Signalling in Public Low-Voltage Power Supply Systems
    • IEC-61000-2-3: Environment - Description of the environment - Radiated and non-network-frequency-related conducted phenomena
    • IEC-61000-2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances
    • IEC-61000-2-5: Environment - Classification of electromagnetic environments. Basic EMC publication
    • IEC-61000-2-6: Environment - Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances
    • IEC 61000-2-7: Environment - Low frequency magnetic fields in various environments
    • IEC-61000-2-8: Environment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
    • IEC 61000-2-9: Environment - Description of HEMP environment. Radiated disturbance. Basic EMC publication
    • IEC 61000-2-10: Environment - Description of HEMP environment. Conducted disturbance
    • IEC 61000-3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)
    • IEC 61000-3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
    • IEC 61000-3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A
    • IEC 61000-3-6: Limits - Assessment of emission limits for distorting loads in MV and HV power systems
    • IEC 61000-3-7: Limits - Assessment of emission limits for fluctuating loads in MV and HV power systems
    • IEC 61000-3-8: Limits - Guide to signalling on low-voltage electrical installations. Emission levels, frequency bands and electromagnetic disturbance levels
    • IEC 61000-3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated voltage current ≤ 75 A and subject to conditional connection
    • IEC 61000-4-1: Testing and measurement techniques - Overview of IEC 61000-4 series
    • IEC 61000-4-2: Testing and measurement techniques - Electrostatic discharge immunity tests. Basic EMC publication
    • IEC 61000-4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
    • IEC 61000-4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test. Basic EMC publication
    • IEC 61000-4-5: Testing and measurement techniques - Surge immunity test
    • IEC 61000-4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
    • IEC 61000-4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
    • IEC 61000-4-8: Testing and measurement techniques - Power frequency magnetic field immunity test. Basic EMC publication
    • IEC 61000-4-9: Testing and measurement techniques - Pulse magnetic field immunity test. Basic EMC publication
    • IEC 61000-4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test. Basic EMC publication
    • IEC 61000-4-11: Testing and measurement techniques Voltage dips, short interruptions and voltage variations immunity tests. Basic EMC publication
    • IEC 61000-4-12: Testing and measurement techniques - Oscillatory waves immunity test. Basic EMC publication
    • IEC 61000-4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at A.C. power port, low frequency immunity tests
    • IEC 61000-4-14: Testing and measurement techniques - Voltage fluctuation immunity test
    • IEC 61000-4-15: Testing and measurement techniques - Flickermeter. Functional and design specifications. Basic EMC publication
    • IEC 61000-4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
    • IEC 61000-4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
    • IEC 61000-4-23: Testing and measurement techniques - Test methods for protective devices for HEMP and other radiated disturbances
    • IEC 61000-4-24: Testing and measurement techniques - Test methods for protective devices for HEMP conducted disturbance. Basic EMC publication
    • IEC 61000-4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems
    • IEC 61000-4-27: Testing and measurement techniques - Unbalance, immunity test
    • IEC 61000-4-28: Testing and measurement techniques - Variation of power frequency, immunity test
    • IEC 61000-4-29: Testing and measurement techniques - Testing and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
    • IEC 61000-4-30: Testing and measurement techniques - Power quality measurement methods
    • IEC 61000-5-1: Installation and mitigation guidelines - General considerations. Basic EMC publication
    • IEC 61000-5-2: Installation and mitigation guidelines - Earthing and cabling
    • IEC 61000-5-5: Installation and mitigation guidelines - Specification of protective devices for HEMP conducted disturbance. Basic EMC publication
    • IEC 61000-5-7: Installation and mitigation guidelines - Degrees of protection provided by enclosures against electromagnetic disturbances (EM code)
    • IEC 61000-6-1:Generic standard -EMC - Susceptibility - Residential, Commercial and Light industry
    • IEC 61000-6-2: Generic standard - EMC - Susceptibility - Industrial
    • IEC 61000-6-3: Generic standard - EMC - Emissions - Residential,Commercial and Light industry
    • IEC 61000-6-4: Generic standard - EMC - Emissions - Industry
    • IEC 61000-6-6: Generic standards - HEMP immunity for indoor equipment
  • IEC 61009 Residual current operated circuit breakers with integral overcurrent protection for household and similar uses (RCBO's)
  • IEC 61010-1: Safety requirements for electrical equipment for measurement, control and laboratory use, Part 1 general requirements.
    • IEC 61010-2-010 Part 2-010: Particular requirements for laboratory equipment for the heating of materials
    • IEC 61010-2-020 Part 2-020: Particular requirements for laboratory centrifuges
    • IEC 61010-2-032 Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement
    • IEC 61010-2-040 Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
    • IEC 61010-2-051 Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
    • IEC 61010-2-061 Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
    • IEC 61010-2-081 Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
    • IEC 61010-2-081am1 Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
    • IEC 61010-2-101 Part 2-101 Particular requirements for in vitro diagnostic (IVD) medical equipment.
  • IEC 61043 Sound intensity meters with pairs of microphones
  • IEC 61058-1 Switches for Appliances - Part 1: General Requirements
    • IEC 61058-2-1: Particular requirements for cord switches
    • IEC 61058-2-4: Particular requirements for independently mounted switches
  • IEC 61097 Global maritime distress and safety system (GMDSS)
    • IEC 61097-6 Narrowband direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NAVTEX)
  • IEC 61131 PLC programming.
  • IEC 61149 Safety of mobile radios
  • IEC 61158 Industrial communication networks - Fieldbus specifications
    • IEC 61158-1 Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series
    • IEC 61158-2 Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition
    • IEC 61158-3 Industrial communication networks - Fieldbus specifications - Part 3: Data-link layer service definition
    • IEC 61158-4 Industrial communication networks - Fieldbus specifications - Part 4: Data-link layer protocol specification
    • IEC 61158-5 Industrial communication networks - Fieldbus specifications - Part 5: Application layer service definition
    • IEC 61158-6 Industrial communication networks - Fieldbus specifications - Part 6: Application layer protocol specification
  • IEC 61162 Maritime navigation and radiocommunication equipment and systems
    • IEC 61162-1 Single talker and multiple listeners
    • IEC 61162-2 Single talker and multiple listeners, high-speed transmission
    • IEC 61162-3 Multiple talkers and multiple listeners, CAN Buss technology
    • IEC 61162-4 Multiple talkers and multiple listeners
      • IEC 61162-400 Ship systems interconnection - Introduction and general principles
      • IEC 61162-401 Ship systems interconnection - Application profile
      • IEC 61162-410 Ship systems interconnection - Transport profile requirements and basic transport profile
      • IEC 61162-420 Ship systems interconnection - Companion standard requirements and basic companion standards
  • IEC 61280 Field testing method for measuring single mode fibre optic cable
  • IEC 61286 Character set with electrotechnical symbols (ISO-IR 181 [1])
  • IEC 61326 Electrical equipment for measurement, control and laboratory use - EMC requirements
  • IEC 61346 Industrial systems, installations and equipment and industrial products — Structuring principles and reference designations
  • IEC 61355 Classification and designation of documents for plants, systems and equipment
  • IEC 61400 Wind turbines
    • 61400-1: Design requirements
    • 61400-2: Design requirements for small wind turbines
    • 61400-3: Design requirements for offshore wind turbines
    • 61400-11: Acoustic noise measurement techniques
    • 61400-12: Wind turbine power performance testing
    • 61400-12-1: Power performance measurements of electricity producing wind turbines
    • 61400-13: Measurement of mechanical loads
    • 61400-14: Declaration of apparent sound power level and tonality values
    • 61400-21: Measurement and assessment of power quality characteristics of grid connected wind turbines
    • 61400-23: Full-scale structural testing of rotor blades
    • 61400-24: Lightning protection
    • 61400-25: Information and information exchange for wind power plants[2]
      • 61400-25-1: Communications for monitoring and control of wind power plants – Overall description of principles and models
      • 61400-25-2: Communications for monitoring and control of wind power plants – Information models
      • 61400-25-3: Communications for monitoring and control of wind power plants – Information exchange models
      • 61400-25-4: Communications for monitoring and control of wind power plants – Mapping to communication profile
      • 61400-25-5: Communications for monitoring and control of wind power plants – Conformance testing
  • IEC 61439 Low-Voltage switchgear and controlgear assemblies
  • IEC 61499 Function blocks
    • IEC 61499-1 Architecture
    • IEC 61499-2 Software tool requirements
    • IEC 61499-3 Tutorial information
    • IEC 61499-4 Rules for compliance profiles
  • IEC 61508 Functional safety of electrical/electronic/programmable electronic safety-related systems
  • IEC 61511 Functional safety - safety instrumented systems for the process industry sector
  • IEC 61537 Cable management - Cable tray systems and cable ladder systems
  • IEC 61557 Equipment for measuring electrical safety in low-voltage distribution systems
  • IEC 61588 Precision clock synchronization protocol for networked measurement and control systems
  • IEC 61603 Infrared transmission of audio or video signals
  • IEC 61643 Surge protective devices connected to low-voltage power distribution systems
  • IEC 61690 Electronic design interchange format, EDIF
    • IEC 61690-1 Version 3 0 0
    • IEC 61690-2 Version 4 0 0
  • IEC 61784 Industrial communication networks - Profiles
    • IEC 61784-1 Industrial communication networks - Profiles - Part 1: Fieldbus profiles
    • IEC 61784-2 Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3
    • IEC 61784-3 Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses
    • IEC 61784-5 Industrial communication networks - Profiles - Part 5: Installation of fieldbuses
  • IEC 61800 Adjustable speed electrical power drive systems
  • IEC 61850 Communication Networks and Systems in Substations
  • IEC 61966 Multimedia systems -- Colour measurement
  • IEC 61968 Application integration at electric utilities – System interfaces for distribution management
  • IEC 61970 Application integration at electric utilities – Energy management system application program interface (EMS-API)
  • IEC 61993 Maritime navigation and radiocommunication equipment and systems.
  • IEC 62040 Uninterruptible power systems
    • IEC 62040-1 General and safety requirements for UPS used in operator access areas
    • IEC 62040-2 Electromagnetic compatibility (EMC) requirements
    • IEC 62040-3 Method of Specifying the Performance and Test Requirements
  • IEC 62056 DLM/COSEM communication protocol for reading utility meters
  • IEC 62196 Plugs and sockets for charging electric vehicles
  • IEC 62264 Enterprise-control system integration
  • IEC 62262 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
  • IEC 62270 Hydroelectric power plant automation - Guide for computer-based control
  • IEC 62271 Standards for high-voltage switchgear and controlgear
    • IEC 62271-100 High-voltage alternating current circuit breakers
    • IEC 62271-102 Alternating current disconnectors and earthing switches
    • IEC 62271-107 AC Fuse Switches 1-52kV
    • IEC 62271-200 AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
    • IEC 62271-203 Gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above
  • IEC 62278 Railway applications – Specification and demonstration of reliability, availability, maintainability and safety (RAMS)
  • IEC 62282-2 Fuel cell technologies - Part 2: Fuel cell modules
  • IEC 62282-3-1 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
  • IEC 62282-3-2 Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods
  • IEC 62282-3-3 Fuel cell technologies - Part 3-3: Stationary fuel cell power systems - Installation
  • IEC 62282-5-1 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
  • IEC 62282-6-200 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
  • IEC 62301 Household electrical appliances - Measurement of standby power
  • IEC 62304 Medical Device Software - Software Life Cycle Processes
  • IEC 62351 Power System Control and Associated Communications - Data and Communication Security
    • IEC 62351-1: Data and Communication Security – Introduction
    • IEC 62351-2: Data and Communication Security – Glossary of Terms
    • IEC 62351-3: Data and Communication Security – Profiles Including TCP/IP
    • IEC 62351-4: Data and Communication Security – Profiles Including MMS
    • IEC 62351-5: Data and Communication Security – Security for IEC 60870-5 and Derivatives (i.e. DNP 3.0)
    • IEC 62351-6: Data and Communication Security – Security for IEC 61850 Profiles
    • IEC 62351-7: Data and Communication Security – Security Through Network and System Management
  • IEC 62379-1: Common control interface for networked digital audio and video products-General
  • IEC 62443 Industrial communication networks - Network and system security (DRAFT)
    • IEC 62443-1 Terminology, concepts and models
    • IEC 62443-2 Establishing an industrial automation and control system security program
    • IEC 62443-3 Operating a manufacturing and control systems security program
    • IEC 62443-4 Specific security requirements for manufacturing and control systems
    • IEC 62443-5 Security technologies for industrial automation and control systems
  • IEC 62464
    • IEC 62464-1 Magnetic resonance equipment for medical imaging - Part 1: Determination of essential image quality parameters
Comments