BS

BS EN ISO 11058   Determination of water permeability characteristics normal to the plane, without load
BS EN ISO 12236   Static puncture test
BS EN ISO 12956   Determination of the characteristic opening size
BS EN ISO 12958   Determination of water flow capacity in their plane
BS EN ISO 12960   Sreening test method for determining the resistance to liquids
BS EN ISO 13427   Abrasion damage simulation (sliding block test)
BS EN ISO 14713   Protection against corrosion of iron & steel in structures - Zinc & Aluminium coatings - Guidelines
BS EN ISO 12944-1:1998 Paints and varnishes. Corrosion protection of steel structures by protective paint systems. General introduction
BS EN ISO 12944-2:1998 Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Classification of environments
BS EN ISO 12944-3:1998 Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Design considerations
BS EN ISO 12944-4:1998 Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Types of surface and surface preparation
BS EN ISO 12944-6:1998 Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Laboratory performance test methods
BS EN ISO 12944-7:1998 Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Execution and supervision of paintwork
BS EN ISO 12944-8:1998 Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Development of specifications for new work and maintenance
BS EN10155   Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions
BS EN 1024:1997 Clay roofing tiles for discontinuous laying. Determination of geometric characteristics
BS EN 1065:1999 Adjustable telescopic steel props. Product specifications, design and assessment by calculation and tests
BS EN1091 Vacuum sewerage systems outside buildings
BS EN 1097-1:1996 Tests for mechanical and physical properties of aggregates. Determination of the resistance to wear (micro-Deval)
BS EN 1097-2:1998 Tests for mechanical and physical properties of aggregates. Methods for the determination of resistance to fragmentation
BS EN 1097-3:1998 Tests for mechanical and physical properties of aggregates. Determination of loose bulk density and voids
BS EN 1097-4:1999 Tests for mechanical and physical properties of aggregates. Determination of the voids of dry compacted filler
BS EN 1097-5:1999 Tests for mechanical and physical properties of aggregates. Determination of the water content by drying in a ventilated oven
BS EN 1097-6:2000 Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption
BS EN 1097-7:1999 Tests for mechanical and physical properties of aggregates. Determination of the particle density of filler. Pyknometer method
BS EN 1097-8:2000 Tests for mechanical and physical properties of aggregates. Determination of the polished stone value
BS EN 1097-9:1998 Tests for mechanical and physical properties of aggregates. Determination of the resistance to wear by abrasion from studded tyres. Nordic test
BS EN 1107-1:2000 Flexible sheets for waterproofing. Determination of dimensional stability. Bitumen sheets for roof waterproofing
BS EN 1107-2:2001 Flexible sheets for waterproofing. Determination of dimensional stability. Plastic and rubber sheets for roof waterproofing
BS EN 1108:2000 Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of form stability under cyclical temperature changes
BS EN 1109:2000 Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flexibility at low temperature
BS EN 1110:2000 Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flow resistance at elevated temperature
BS EN 1121:2000 Doors. Behaviour between two different climates. Test method
BS EN 1125:1997 Building hardware. Panic exit devices operated by a horizontal bar. Requirements and test methods
BS EN 1154:1997 Building hardware. Controlled door closing devices. Requirements and test methods
BS EN 1155:1997 Building hardware. Electrically powered hold-open devices for swing doors. Requirements and test methods
BS EN 1158:1997 Building hardware. Door coordinator devices. Requirements and test methods
BS EN 1169:1999 Precast concrete products. General rules for factory production control of glass-fibre reinforced cement
BS EN 1191:2000 Windows and doors. Resistance to repeated opening and closing. Test method
BS EN1192  Doors. Classification of strength requirements
BS EN 12056-1:2000 Gravity drainage systems inside buildings. General and performance requirements
BS EN 12056-2:2000 Gravity drainage systems inside buildings. Sanitary pipework, layout and calculation
BS EN 12056-3:2000 Gravity drainage systems inside buildings. Roof drainage, layout and calculation
BS EN 12056-4:2000 Gravity drainage systems inside buildings. Wastewater lifting plants. Layout and calculation
BS EN 12056-5:2000 Gravity drainage systems inside buildings. Installation and testing, instructions for operation, maintenance and use
BS EN12063 Execution of special geotechnical work. Sheet pile walls
BS EN12068   Cathodic protection - External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tape & shri
BS EN12188  Products and systems for the protection and repair of concrete structures - structures - Determinationof adhesion steel-to-steel for characterization of structural bonding a
BS EN12189  Products and systems for the protection and repair of concrete structures - Test method - Determination ofopen time
BS EN12192-2  Products and systems for the protection and repair of concrete structures - Granulometry analysis -Test method for filler for polymer bonding agents
BS EN 12193:1999 Light and lighting. Sports lighting
BS EN12224   Determine of resistance to weathering
BS EN12225   Determining teh microbiological resistance by a soil burial test
BS EN12226   General tests for evalution following durability testing
BS EN 12320 Building hardwares. Padlock & padlock fittings
BS EN 12350-1:2000 Testing fresh concrete. Sampling
BS EN 12350-2:2000 Testing fresh concrete. Slump test
BS EN 12350-3:2000 Testing fresh concrete. Vebe test
BS EN 12350-4:2000 Testing fresh concrete. Degree of compactability
BS EN 12350-5:2000 Testing fresh concrete. Flow table test
BS EN 12350-6:2000 Testing fresh concrete. Density
BS EN 12350-7:2000 Testing fresh concrete. Air content. Pressure methods
BS EN 12370:1999 Natural stone test methods. Determination of resistance to salt crystallization
BS EN 12371:2001 Natural stone test methods. Determination of frost resistance
BS EN 12372:1999 Natural stone test methods. Determination of flexural strength under concentrated load
BS EN 12390-1:2000 Testing hardened concrete. Shape, dimensions and other requirements for specimens and moulds
BS EN 12390-2:2000 Testing hardened concrete. Making and curing specimens for strength tests
BS EN 12390-3:2002 Testing hardened concrete. Compressive strength of test specimens
BS EN 12390-4:2000 Testing hardened concrete. Compressive strength. Specification for testing machines
BS EN 12390-5:2000 Testing hardened concrete. Flexural strength of test specimens
BS EN 12390-6:2000 Testing hardened concrete. Tensile splitting strength of test specimens
BS EN 12390-7:2000 Testing hardened concrete. Density of hardened concrete
BS EN 12390-8:2000 Testing hardened concrete. Depth of penetration of water under pressure
BS EN124   Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking,quality control
BS EN 12407:2000 Natural stone test methods. Petrographic examination
BS EN12447   Screening test method for determining the resistance to hydrolysis in water
BS EN 12467:2000 Fibre-cement flat sheets. Product specifications and test methods
BS EN 12473:2000 General principles of cathodic protection in sea water
BS EN 12504-1:2000 Testing concrete in structures. Cored specimens. Taking, examining and testing in compression
BS EN 12504-2:2001 Testing concrete in structures. Non-destructive testing. Determination of rebound number
BS EN 12524:2000 Building materials and products. Hygrothermal properties. Tabulated design values
BS EN 1253-1:1999 Gullies for buildings. Requirements
BS EN 1253-2:1999 Gullies for buildings. Test methods
BS EN 1253-3:1999 Gullies for buildings. Quality control
BS EN 1253-4:2000 Gullies for buildings. Access covers
BS EN12591 Bitumen and bituminous binders. Specifications for paving grade bitumens
BS EN 12597 Bitumen and bituminous binders. Terminology
BS EN 12670:2002 Natural stone. Terminology
BS EN12676-1 Anti-glare systems for roads - Part 1: Performance and characteristics
BS EN12676-2 Anti-glare systems for roads – Part 2: Test methods
BS EN12696  Cathodic protection of steel in concrete
BS EN12697-1 Bituminous mixtures -Test methods for hotmix asphalt - Part 1: Soluble binder content
BS EN 12697-13:2000 Bituminous mixtures. Test methods for hot mix asphalt. Temperature measurement
BS EN 12697-14:2000 Bituminous mixtures. Test methods for hot mix asphalt. Water content
BS EN 12697-27:2001 Bituminous mixtures. Test methods for hot mix asphalt. Sampling
BS EN 12697-28:2001 Bituminous mixtures. Test methods for hot mix asphalt. Preparation of samples for determining binder content, water content and grading
BS EN12697-3 Bituminous mixtures — Test methods for hot mix asphalt — Part 3: Bitumen recovery: Rotary evaporator
BS EN 12697-4:2000 Bituminous mixtures. Test methods for hot mix asphalt. Bitumen recovery: Fractionating column
BS EN12699 Execution of special geotechnical work. Displacement piles
BS EN12715 Execution of special geotechnical work. Grouting
BS EN12716 Execution of special geotechnical works. Jet grouting
BS EN 12839:2001 Precast concrete products. Elements for fences
BS EN 12859:2001 Gypsum blocks. Definitions, requirements and test methods
BS EN 12860:2001 Gypsum based adhesives for gypsum blocks. Definitions, requirements and test methods
BS EN 12878:1999 Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test
BS EN12889 Trenchless construction and testing of drains and sewers
BS EN 1295-1:1998 Structural design of buried pipelines under various conditions of loading. General requirements
BS EN 12954:2001 Cathodic protection of buried or immersed metallic structures. General principles and application for pipelines
BS EN 1296:2001 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roofing. Method of artificial ageing by long term exposure to elevated temperature
BS EN12970 Mastic asphalt for waterproofing. Definitions, requirements and test methods
BS EN 1298:1996 Mobile access and working towers. Rules and guidelines for the preparation of an instruction manual
BS EN13019 Machines for road surface cleaning. Safety requirements
BS EN 1304:1998 Clay roofing tiles for discontinuous laying. Products definitions and specifications
BS EN 1308:1999 Adhesives for tiles. Determination of slip
BS EN 13084-1:2000 Free-standing industrial chimneys. Free-standing industrial chimneys. General requirements
BS EN13145 Railway applications. Track. Wood sleepers and bearers
BS EN 13161:2001 Natural stone test methods. Determination of flexural strength under constant moment
BS EN13174 Cathodic protection for harbour installations
BS EN 1322 Adhesives for tiles
BS EN 1323:1999 Adhesives for tiles. Concrete slab for test
BS EN 13238:2001 Reaction to fire tests for building products. Conditioning procedures and general rules for selection of substrates
BS EN 1324:1999 Adhesives for tiles. Determination of shear adhesion strength of dispersion adhesives
BS EN13249   Characteristics required for use in the construction of roads and other trafficked areas
BS EN13250   Characteristics required for use in the construction of railways
BS EN13251   Characteristics required for use in earthworks foundations & retaining structures
BS EN13252   Characteristics required for use in drainage systems
BS EN13253   Characteristics required for use in erosion control works (coatal protection, bank revetments)
BS EN13254   Characteristics required for use in the construction of reservoirs & dams
BS EN13255   Characteristics required for use in the construction of canals
BS EN13256   Characteristics required for use in the construction of tunnels & underground structures
BS EN13257   Characteristics required for use in solid waste disposals
BS EN13265   Characteristics required for use in liquid waste containment projects
BS EN 13364:2002 Natural stone test methods. Determination of the breaking load at dowel hole
BS EN 13369:2001 Common rules for precast concrete products
BS EN 1337-1:2000 Structural bearings. General design rules
BS EN 1337-11:1998 Structural bearings. Transport, storage and installation
BS EN 1337-2:2001 Structural bearings. Sliding elements
BS EN1337-2 Structural bearings – Part 2: Sliding elements
BS EN 1337-7:2001 Structural bearings. Spherical and cylindrical PTFE bearings
BS EN1337-7 Structural bearings – Part 7: Spherical and cylindrical PTFE bearings
BS EN 1337-9:1998 Structural bearings. Protection
BS EN13380 General requirements for components used for renovation and repair of drain and sewer systems outside buildings
BS EN1341 Slabs of natural stone for external paving. Requirements and test methods
BS EN1342 Setts of natural stone for external paving. Requirements and test methods
BS EN1343 Kerbs of natural stone for external paving. Requirements and test methods
BS EN1352   Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
BS EN 1354:1997 Determination of compressive strength of lightweight aggregate concrete with open structure
BS EN13562   Determination of resistance to penetration by water
BS EN 13755:2002 Natural stone. Test methods. Determination of water absorption at atmospheric pressure
BS EN1423 Road marking materials. Drop on materials. Glass beads, antiskid aggregates and mixtures of the two
BS EN1424 Road marking materials. Premix glass beads
BS EN1436 Road marking materials. Road marking performance for road users
BS EN 1444:2001 Fibre-cement pipelines. Guide for laying and on-site work practices
BS EN1463-1 Road marking materials - Retroreflecting road Studs - Part 1. Initial performance requirements
BS EN1463-2 Road marking materials – Retroreflecting road studs – Part 2: Road test performance specifications
BS EN1504-1  Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1 Definitions
BS EN1536 Execution of special geotechnical work. Bored piles
BS EN1537 Execution of special geotechnical work. Ground anchors
BS EN1538 Execution of special geotechnical works. Diaphragm walls
BS EN1610 Construction and testing of drains and sewers
BS EN1671 Pressure sewerage systems outside buildings
BS EN 1744-1:1998 Tests for chemical properties of aggregates. Chemical analysis
BS EN1766  Products and systems for the protection and repair of concrete structures - Test method - Reference concretefor testing
BS EN1790 Road marking materials. Preformed road markings
BS EN 1806:2000 Chimneys. Clay/ceramic flue blocks for single wall chimneys. Requirements and test methods
BS EN1824 Road marking materials. Road trials
BS EN1871 Road marking materials. Physical properties
BS EN1897   Determination of the compressive creep properties
BS EN 196-1:1995 Methods of testing cement. Determination of strength
BS EN 196-2:1995 Methods of testing cement. Chemical analysis of cement
BS EN 196-21:1992 Methods of testing cement. Determination of the chloride, carbon dioxide and alkali content of cement
BS EN 196-3:1995 Methods of testing cement. Determination of setting time and soundness
BS EN 196-5:1995 Methods of testing cement. Pozzolanicity test for pozzolanic cements
BS EN 196-6:1992 Methods of testing cement. Determination of fineness
BS EN 196-7:1992 Methods of testing cement. Methods of taking and preparing samples of cement
BS EN 197-1:2000 Cement. Composition, specifications and conformity criteria for common cements
BS EN 197-2:2000 Cement. Conformity evaluation
BS EN206-1  Concrete - Part 1- Specification, performance, production and conformity
BS EN 26927:1991, ISO 6927:1981 Building construction. Jointing products. Sealants. Vocabulary
BS EN29917 Spec for Dental water-based cements
BS EN30320   ISO 10320 Geotextiles - Identification on site
BS EN338   Structure timber - Strength classes
BS EN 413-2:1995 Masonry cement. Test methods
BS EN438-1  Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins Part 1. Specifications
BS EN438-2  Decorative high-pressure laminates (HPL) - Sheets based on thermosetting resins Part 2.. Determination ofproperties
BS EN 450:1995 Fly ash for concrete. Definitions, requirements and quality control
BS EN476 General requirements for components used in discharge pipes, drains and sewers for gravity systems
BS EN 490:1994 Concrete roofing tiles and fittings. Product specifications
BS EN 491:1994 Concrete roofing tiles and fittings. Test methods
BS EN 492:1994 Fibre-cement slates and their fittings for roofing. Product specification and test methods
BS EN 494:1994 Fibre-cement profiled sheets and fittings for roofing. Product specification and test methods
BS EN 495-5:2001 Flexible sheets for waterproofing. Determination of foldability at low temperature. Plastic and rubber sheets for roof waterproofing
BS EN 512:1995 Fibre-cement products. Pressure pipes and joints
BS EN 538:1994 Clay roofing tiles for discontinuous laying. Flexural strength test
BS EN 539-1:1994 Clay roofing tiles for discontinuous laying. Determination of physical characteristics. Impermeability test
BS EN 539-2:1998 Clay roofing tiles for discontinuous laying. Determination of physical characteristics. Test for frost resistance
BS EN 588-1:1997 Fibre-cement pipes for sewers and drains. Pipes, joints and fittings for gravity systems
BS EN 60335-2-21:1992 Specification for safety of household and similar electrical appliances. Particular requirements. Storage water heaters
BS EN 60335-2-21:1999 Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for storage water heaters
BS EN 60335-2-30:1997 Specification for safety of household and similar electrical appliances. Particular requirements. Room heaters
BS EN 60335-2-35:1995 Specification for safety of household and similar electrical appliances. Particular requirements. Instantaneous water heaters
BS EN 60335-2-35:1998 Specification for safety of household and similar electrical appliances. Particular requirements for instantaneous water heaters
BS EN 60335-2-40:1998 Specification for safety of household and similar electrical appliances. Particular requirements. Electrical heat pumps, air-conditioners and dehumidifiers
BS EN 60335-2-53:1991 Specification for safety of household and similar electrical appliances. Particular requirements. Electric sauna heating appliances
BS EN 60335-2-53:1997 Specification for safety of household and similar electrical appliances. Particular requirements. Sauna heating appliances
BS EN 60335-2-73:1997 Specification for safety of household and similar electrical appliances. Particular requirements. Fixed immersion heaters
BS EN 60335-2-84:1999 Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for toilets
BS EN 60335-2-88:1997 Specification for safety of household and similar electrical appliances. Particular requirements. Humidifiers intended for use with heating, ventilation, or air-conditioning systems
BS EN 60335-2-98:1997 Specification for safety of household and similar electrical appliances. Particular requirements. Humidifiers
BS EN 60617-11:1997 Graphical symbols for diagrams. Architectural and topographical installation plans and diagrams
BS EN 639:1995 Common requirements for concrete pressure pipes including joints and fittings
BS EN 640:1995 Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings
BS EN 641:1995 Reinforced concrete pressure pipes, cylinder type, including joints and fittings
BS EN 642:1995 Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes
BS EN752-1 Drain and sewer systems outside buildings — Part 1: Generalities and definitions
BS EN752-2 Drain and sewer systems outside buildings Part 2. Performance requirements
BS EN752-3 Drain and sewer systems outside buildings — Part 3: Planning
BS EN752-4 Drain and sewer systems outside buildings. Hydraulic design and environmental considerations
BS EN752-6 Drain and sewer systems outside buildings. Pumping installations
BS EN752-7 Drain and sewer systems outside buildings. Maintenance and operations
BS EN 771-2:2001 Specification for masonry units. Calcium silicate masonry units
BS EN 771-4:2001 Specification for masonry units. Autoclaved aerated concrete masonry units
BS EN 771-6:2001 Specification for masonry units. Natural stone masonry units
BS EN 772-1:2000 Methods of test for masonry units. Determination of compressive strength
BS EN 772-10:1999 Methods of test for masonry units. Determination of moisture content of calcium silicate and autoclaved aerated concrete units
BS EN 772-11:2000 Methods of test for masonry units. Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
BS EN 772-13:2000 Methods of test for masonry units. Determination of net and gross dry density of masonry units (except for natural stone)
BS EN 772-14:2002 Methods of test for masonry units. Determination of moisture movement of aggregate concrete and manufactured stone masonry units
BS EN 772-15:2000 Methods of test for masonry units. Determination of water vapour permeability of autoclaved aerated concrete masonry units
BS EN 772-16:2000 Methods of test for masonry units. Determination of dimensions
BS EN 772-18:2000 Methods of test for masonry units. Determination of freeze-thaw resistance of calcium silicate masonry units
BS EN 772-19:2000 Methods of test for masonry units. Determination of moisture expansion of large horizontally perforated clay masonry units
BS EN 772-2:1998 Methods of test for masonry units. Determination of percentage area of voids in aggregate concrete masonry units (by paper indentation)
BS EN 772-20:2000 Methods of test for masonry units. Determination of flatness of faces of aggregate concrete, manufactured stone and natural stone masonry units
BS EN 772-3:1998 Methods of test for masonry units. Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing
BS EN 772-4:1998 Methods of test for masonry units. Determination of real and bulk density and of total and open porosity for natural stone masonry units
BS EN 772-5:2001 Methods of test for masonry units. Determination of the active soluble salts content of clay masonry units
BS EN 772-6:2001 Methods of test for masonry units. Determination of bending tensile strength of aggregate concrete masonry units
BS EN 772-7:1998 Methods of test for masonry units. Determination of water absorption of clay masonry damp proof course units by boiling in water
BS EN 772-9:1998 Methods of test for masonry units. Determination of volume and percentage of voids and net volume of calcium silicate masonry units by sand filling
BS EN 805:2000 Water supply. Requirements for systems and components outside buildings
BS EN858-1 Separator systems for light liquids (e.g. oil and petrol) — Part 1: Principles of product design, performance and testing, marking and quality control
BS EN932-1-1997  Test for general properties of aggregates - Part 1  Methods for sampling
BS EN932-2-1999  Test for general properties of aggregates - Part 2 - Methods for reducing laboratory samples
BS EN932-3-1997  Test for general properties of aggregates - Part 3- Procedure & terminology for simplified petrographic description
BS EN932-5  Test for general properties of aggregates - Part 5- Common equipment & calibration
BS EN932-6-1999  Test for general properties of aggregates - Part 6 - Definition of repeatability & reproducibility
BS EN933-1  Test for geometrical properties of aggregates - Part 1 - Determination of particle size distribution -sieving method
BS EN933-10  Test for geometrical properties of aggregates - Part 10 - Assessment of fines - Grading of fillers (Air-jet sieving)
BS EN933-2  Test for geometrical properties of aggregates. Part 2 -  Determination of particle size distribution -Testsieves, nominal size of aperatures
BS EN933-3  Test for geometrical properties of aggregates. Part 3 - Determination of particle sgape - Flakiness index
BS EN933-4  Test for geometrical properties of aggregates. Part 4 -  Determination of particle shape - Shape index
BS EN933-5  Test for geometrical properties of aggregates. Part 5 - Determination of percentage of crushed & broken surfaces in coarse aggregate particles
BS EN933-7  Test for geometrical properties of aggregates. Part 7 - Determination of shell content - percentage ofshells in coarse aggregates
BS EN933-8  Test for geometrical properties of aggregates. Part 8 -  Assessment of fines-sand equivalent test
BS EN933-9  Test for geometrical properties of aggregates. Part 9 -  Assessment of fines - Methylene blue test
BS EN934-2  Admixtures for concrete, mortar & grout. Part 2 -  concrete admixture - Definitions, requirements, conformity, marking & labelling
BS EN934-4  Admixtures for concrete, mortar & grout. Part 4 - Admixtures for prestressing tendons - Definitions, requirements, conformity, marking & labelling
BS EN934-6 Admixtures for concrete, mortar and grout. Sampling, conformity control and evaluation of conformity
BS EN 949:1999 Windows and curtain walling, doors, blinds and shutters. Determination of the resistance to soft and heavy body impact for doors
BS EN963   Sampling & preparation of test specimens
BS EN964-1  Determination of thickness at specified pressures - Part 1 - single layers
BS EN965   Determination of mass per unit area
BS EN 990:1996 Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure
BS EN 991:1996 Determination of the dimensions of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
BS EN 992:1996 Determination of the dry density of lightweight aggregate concrete with open structure
BS EN996 Piling equipment – Safety requirements
BS EN 998-2:2002 Specification for mortar for masonry. Masonry mortar
BS ISO 11600 Building construction. Sealants. Classification and requirements
BS ISO 1803:1997 Building construction. Tolerances. Expression of dimensional accuracy. Principles and terminology
BS1000(666)   Universal decimal Classification - Glass industry. Ceramics, Cement & Concrete
BS1014   Pigments for Portland cement and Portland cement products
BS10175 Investigation of potentially contaminated sites. Code of practice
BS 1105:1981 Specification for wood wool cement slabs up to 125 mm thick
BS 1139-1.1:1990 Metal scaffolding. Tubes. Specification for steel tube
BS 1139-1.2:1990 Metal scaffolding. Tubes. Specification for aluminium tube
BS 1139-2.1:1991 Metal scaffolding. Couplers. Specification for steel couplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes
BS 1139-2.2:1991 Metal scaffolding. Couplers. Specification for steel and aluminium couplers, fittings and accessories for use in tubular scaffolding
BS 1139-3:1994 Metal scaffolding. Specification for prefabricated mobile access and working towers
BS 1139-4:1982 Metal scaffolding. Specification for prefabricated steel splitheads and trestles
BS 1139-5:1990 Metal scaffolding. Specification for materials, dimensions, design loads and safety requirements for service and working scaffolds made of prefabricated elements
BS1186-1  Timber for and workmanship in joinery Part 1. Specification for timber
BS1186-2  Timber for and workmanship in joinery Part 2. Specification for workmanship
BS1186-3  Timber for and workmanship in joinery - Part 3 -  Specification for wood trim & its fixing
BS 1192-3:1987 Construction drawing practice. Recommendations for symbols and other graphic conventions
BS1197-2 Specification for concrete flooring tiles and fittings. Metric units
BS1199   Building sands from natural sources
BS12   Portland cement
BS 1243:1978 Specification for metal ties for cavity wall construction
BS1245   Metal door frames (steel)
BS 1369-1:1987 Steel lathing for internal plastering and external rendering. Specification for expanded metal and ribbed lathing
BS1370  Low heat Portland cement
BS1377-1  General requirements and sample preparation
BS1377-2  Classification tests
BS1377-3  Chemical & electro-chemical tests
BS1377-4  Compaction-related tests
BS1377-5  Compressibility, permiability & durability tests
BS1377-6  Consolidation & permiability tests in hydraulic cells & with pore pressure measurement
BS1377-7  Shear stregth tests
BS1377-8  Shear strength tests ( effective stress)
BS1377-9  In-situ tests
BS1446  Mastic asphalt (natural rock asphalt fine aggregate) for roads & footways
BS 146:2002 Specification for blastfurnace cements with strength properties outside the scope of BS EN 197-1
BS14656   Epoxy powder & sealing material for the coating of steel for the reinforcement of concrete
BS 1494-1:1964 Specification for fixing accessories for building purposes. Fixings for sheet, roof and wall coverings
BS1521   Waterproof building papers
BS 1567:1953 Specification for wood door frames and linings
BS1615   Anodic oxidation coatings on aluminium & its alloys
BS 1722-1:1999 Fences. Specification for chain link fences
BS 1722-10:1999 Fences. Specification for anti-intruder fences in chain link and welded mesh
BS 1722-11:2000 Fences. Specification for prefabricated wood panel fences
BS 1722-12:1999 Fences. Specification for steel palisade fences
BS 1722-13:1978 Fences. Chain link fences for tennis court surrounds
BS 1722-14:2001 Fences. Specification for open mesh steel panel fences
BS 1722-16:1992 Fences. Specification for organic powder coatings to be used as a plastics finish to components and mesh
BS 1722-2:2000 Fences. Specification for strained wire and wire mesh netting fences
BS 1722-4:1986 Fences. Specification for cleft chestnut pale fences
BS 1722-5:1999 Fences. Specification for close-boarded and wooden palisade fences
BS 1722-7:1999 Fences. Specification for wooden post and rail fences
BS 1722-8:1997 Fences. Specification for mild steel (low carbon steel) continuous bar fences and hurdles
BS 1722-9:2000 Fences. Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals
BS1796  Test sieving — Part 1: Methods using test sieves of woven wire cloth and perforated metal plate
BS 187:1978 Specification for calcium silicate (sandlime and flintlime) bricks
BS1881-101  Method of sampling fresh concrete on site
BS1881-102  Method for determination of slump
BS1881-103  Method for determination of compacting factor
BS1881-104  Method for determination of Vebe time
BS1881-105  Method of determination of flow
BS1881-106  Methods for determination of air content of fresh concrete
BS1881-107  Method for determination of density of compacted fresh concrete
BS1881-108  Method for making test cubes from fresh concrete
BS1881-109  Method for making test beams from fresh concrete
BS1881-110  Method for making test cylinders from fresh concrete
BS1881-111  Method of normal curing of test specimens (20 øC method)
BS1881-112  Methods of accelerated curing of test cubes
BS1881-113  Method for making and curing no-fines test cubes 
BS1881-114  Methods for determination of density of hardened concrete
BS1881-115  Specification for compression testing machines for concrete
BS1881-116  Method for determination of compressive strength of concrete cubes
BS1881-117  Method for determination of tensile splitting strength
BS1881-118  Method for determination of flexural strength
BS1881-119  Method for determination of compressive strength using portions of beams broken in flexure (equivalentcubemethod)
BS1881-120  Method for determination of the compressive strength of concrete cores
BS1881-121  Method for determination of static modulus of elasticity in compression
BS1881-122  Method for determination of water absorption
BS1881-124  Methods for analysis of hardened concrete
BS1881-125  Methods dor mixing and sampling fresh concrete in the laboratory
BS1881-127  Method of verifying the performance of a concrete cube compression machine using the comparative cubetest
BS1881-128  Method for analysis of fresh concrete
BS1881-129  Method for determination of density of partially compacted semi-dry fresh concrete
BS1881-130  Method for temperature-matched curing of concrete specimens
BS1881-131  Methods of testing cement in a reference concrete
BS1881-201  Guide to the use of non-destructive methods of test for hardened concrete
BS1881-202  Recommendations for surface hardness testing by rebound hammer
BS1881-203  Recommendations for measurement of velocity of ultrasonic pulses in concrete
BS1881-204  Recommendations on the use of electromagnetic covermeters
BS1881-205  Recommendations for radiography of concrete
BS1881-206  Recommendations for determination of strain in concrete
BS1881-207  Recommendations for the assessment of concrete strength by near-to-surface test
BS1881-208  Recommendations for the determination of the initial surface absorption of concrete
BS1881-209  Recommendations for the measurement of dynamic modulus of elasticity
BS1924-1-1990  Stabilized materials for civil engineering purposes. Part 1 - general requirements, sampling, sample preparation & tests on materials before stabilization
BS1924-1975  Stabilized materials for civil engineering purposes. Part 1 - general requirements, sampling, samplepreparation & tests on materials before stabilization
BS1924-2  Stabilized materials for civil engineering purposes. Part 2 - methods of test for cement-stabilized & lime-stabilized materials
BS2499-1-1993  Hot-applied joint sealant systems for concrete pavements. Part 1 - specification for joint sealants
BS2499-1973  Specification for hot applied joint sealants for concrete pavements
BS2499-2  Specification for hot applied joint sealants for concrete pavements. Part 2 code of practice for the application & use of joint sealants
BS2499-3  Specification for hot applied joint sealants for concrete pavements. Part 3 - methods of test
BS2573-1  Rules for the design of cranes Part 1. Specification for classification, stress calculations and designcriteria for structures
BS2573-2  Rules for the design of cranes Part 2. Specification for class and design of mechanisms ification, stress calculations
BS3143-1 Road danger lamps. Specification for kerosine burning lamps
BS 3148:1980 Methods of test for water for making concrete (including notes on the suitability of the water)
BS3260   Specification for semi-flexible PVC floor tiles
BS3261-1  Specification for unbacked flexible PVC flooring. Part 1 - homogenous flooring
BS3262-1 Hot-applied thermoplastic road marking materials — Part 1: Specification for constituent materials and mixtures
BS3262-2 Hot-applied thermoplastic road marking materials — Part 2: Specification for road performance
BS3262-3 Hot-applied thermoplastic road marking materials — Part 3: Specification for application of material to road surfaces
BS 3470:1975 Specification for field gates and posts
BS 3572:1986 Specification for access fittings for chimneys and other high structures in concrete or brick work
BS 3621:1998 Specification for thief resistant locks
BS 3678:1986 Specification for access hooks for chimneys and other high structures in steel
BS3690-1 Bitumens for building and civil engineering — Part 1:  pecification for bitumens for roads and other paved areas
BS 3690-2:1989 Bitumens for building and civil engineering. Specification for bitumens for industrial purposes
BS3690-3 Bitumens for buildingand civil engineering —Part 3: Specification for mixtures of bitumen with pitch, tar and Trinidad lake asphalt
BS3797  Specification for lightweight aggregates for masonry units & structural concrete
BS 3809:1993 Specification for wood wool permanent formwork and infill units for reinforced concrete floors and roofs
BS 3892-1:1997 Pulverized-fuel ash. Specification for pulverized-fuel ash for use with Portland cement
BS 3892-2:1996 Pulverized-fuel ash. Specification for pulverized-fuel ash to be used as a Type I addition
BS 3892-3:1997 Pulverized-fuel ash. Specification for pulverized-fuel ash for use in cementitious grouts
BS 3921:1985 Specification for clay bricks
BS3987   Anodic oxidation coatings on wrought aluminium for external architectural applications
BS4027   Specification for sulfate-resisting portland cement
BS 4046:1991 Specification for compressed straw building slabs
BS4-1  Specification for hot-rolled sections
BS 4131:1973 Specification for terrazzo tiles
BS4232   Spec for surface finish of blast-cleaned steel for painting
BS 4246:1996 Specification for high slag blastfurnace cement
BS 4248:1974 Specification for supersulphated cement
BS 4254:1983 Specification for two-part polysulphide-based sealants
BS434-1 Bitumen road emulsions (anionic and cationic). Specification for bitumen road emulsions
BS434-2 Bitumen road emulsions (anionic and cationic) — Part 2: Code of practice for use of bitumen road emulsions
BS435 Spec for Dressd natural stone kerbs, channels, quadrants & setts
BS 4357:1968 Specification for precast terrazzo units
BS4360   Specification for Weldable structural steels
BS 4447:1973 Specification for the performance of prestressing anchorages for post-tensioned construction
BS4447 Specification for the performance of prestressing anchorages for post-tensioned construction
BS4449   Carbon steel bars for the reinforcement of concrete
BS4466   Scheduling, dimensioning, bending and cutting of steel 
BS 4467:1991 Guide to dimensions in designing for elderly people
BS4483-1985  Steel fabric for the reinforcement of concrete
BS4483-1998  Steel fabric for the reinforcement of concrete
BS 4485-2:1988 Water cooling towers. Methods for performance testing
BS 4485-3:1988 Water cooling towers. Code of practice for thermal and functional design
BS 4485-4:1996 Water cooling towers. Code of practice for structural design and construction
BS 449-2:1969 Specification for the use of structural steel in building. Metric units
BS 4550-0:1978 Methods of testing cement. General introduction
BS 4550-3.1:1978 Methods of testing cement. Physical tests. Introduction
BS 4550-3.4:1978 Methods of testing cement. Physical tests. Strength tests
BS 4550-3.8:1978 Methods of testing cement. Physical tests. Test for heat of hydration
BS 4550-6:1978 Methods of testing cement. Standard sand for mortar cubes
BS4551-1-1998  Methods of testing mortars, screeds and plasters Part 1. Physical testing 
BS4551-1980  Methods of testing mortars, screeds and plasters
BS4551-2  Methods of testing mortars, screeds and plasters 
BS 459:1988 Specification for matchboarded wooden door leaves for external use
BS 4592-1:1995 Industrial type flooring, walkways and stair treads. Specification for open bar gratings
BS 4592-2:1987 Industrial type flooring, walkways and stair treads. Specification for expanded metal grating panels
BS 4592-3:1987 Industrial type flooring, walkways and stair treads. Specification for cold formed planks
BS 4592-4:1992 Industrial type flooring, walkways and stair treads. Specification for glass reinforced plastics open bar gratings
BS 4592-5:1995 Industrial type flooring, walkways and stair treads. Specification for solid plates in steel, aluminium and glass reinforced plastics
BS 460:1964 Specification for cast iron rainwater goods
BS 4604-1:1970 Specification for the use of high strength friction grip bolts in structural steelwork. Metric series. General grade
BS 4604-2:1970 Specification for the use of high strength friction grip bolts in structural steelwork. Metric series. Higher grade (parallel shank)
BS 4625:1970 Specification for prestressed concrete pressure pipes (including fittings)
BS 4721:1981 Specification for ready-mixed building mortars
BS 4729:1990 Specification for dimensions of bricks of special shapes and sizes
BS476-11  Method for assessing the heat emission from building materials
BS476-1-1953  Fire tests on building materials and structures
BS476-12  Method of test for ignitability of products by direct flame impingement
BS476-13  Method of measuring the ignitability of products subjected to thermal irradiance
BS476-15  Method for measuring the rate of heat release of products
BS476-21  Methods for determination of the fire resistance of loadbearing elements of construction
BS476-23  Methods for determination of the contribution of components to the fire resistance of a structure
BS476-24  Method for determination of the O fire resistance of ventilation ducts [ IS0 title - Fire resistance tests -Ventilation ducts]
BS476-3  External fire exposure roof test
BS476-32  Guide to full scale fire tests within buildings
BS476-33  Full-scale room test for surface products
BS476-5  Method of test for ignitability
BS476-7  Method of test to determine the classification of the surface spread of flame of products
BS476-8  Test methods & criteria for the fire resistance of elements of building construction
BS4787-1 Internal & external wood doorsets, door leaves & frames. Part 1 - Specification for dimensional requirements
BS4800   Paint colours for building purposes
BS4873   Specification for Aluminium alloy windows
BS4887-1  Ready-mixed building mortars
BS 4904:1978 Specification for external cladding colours for building purposes
BS 493:1995 Specification for airbricks and gratings for wall ventilation
BS4987-1 Coated macadam (asphalt concrete) for roads and other paved areas. Specification for constituent materials and for mixtures
BS4987-2 Coated macadam for roads and other paved areas — Part 2: Specification for transport, laying and compaction
BS 5075-1:1982 Concrete admixtures. Specification for accelerating admixtures, retarding admixtures and water reducing admixtures
BS 5075-2:1982 Concrete admixtures. Specification for air-entraining admixtures
BS 5075-3:1985 Concrete admixtures. Specification for superplasticizing admixtures
BS5135   Arc welding of carbon and carbon manganese steels
BS5212-1-1990  Cold applied joint sealant system for concrete pavement. Part 1 - Specification for joint sealants
BS5212-1975  Cold applied joint sealant system for concrete pavement. Part 1 - Specification for joint sealants
BS5212-2  Cold applied joint sealant system for concrete pavement. Part 2 - code of practice for the application &usejoint sealants
BS5212-3  Cold applied joint sealant system for concrete pavement. Part 3 - method of test
BS 5215:1986 Specification for one-part gun grade polysulphide-based sealants
BS 5224:1995 Specification for masonry cement
BS 5234-1:1992 Partitions (including matching linings). Code of practice for design and installation
BS 5234-2:1992 Partitions (including matching linings). Specification for performance requirements for strength and robustness including methods of test
BS 5250:1989 Code of practice for control of condensation in buildings
BS 5262:1991 Code of practice for external renderings
BS 5262:1991 Code of practice for external renderings
BS5268-2  Code of practice for permissible stress design, materials and workmanship
BS5268-3  Code of practice for trussed rafter roofs
BS5268-4.1  Recommedations for calculating fire resistance of timber members
BS5268-4.2  Recommedations for calculating fire resistance of timber stud walls & joisted floor constructions
BS5268-5  Code of practice for the preservative treatment of structural timber
BS5268-6.1  Code of practice for timber frame walls Section 6.1 Dwellings not exceeding four storeys
BS5268-7.1  Recommendations for the calculation basis for span tables Section 7.1 Domestic floor joists
BS5268-7.2  Joists for flat roofs
BS5268-7.3  Recommendations for the calculation basis for span tables Section 7.3 Ceiling joists
BS5268-7.4  Ceiling binders
BS5268-7.5  Domestic rafters
BS5268-7.6  Purlins supporting rafters
BS5268-7.7  Purlins supporting sheeting or decking
BS5273 Specification. Dense tar surfacing for roads and other paved areas
BS 5286:1978 Specification for aluminium framed sliding glass doors
BS5325-1983  Installation of textile floor coverings
BS5325-2001  Installation of textile floor coverings
BS5328-1  Guide to specifying concrete
BS5328-2  Method for specifying concrete mixes
BS5328-3  Specification for the procedures to be used in producing &transporting concrete
BS5328-4 Concrete. Part 4. Specification for the procedures to be used in sampling, testing &assessing complianceof concrete 
BS5368-1  Methods of testing Windows Part I. Air permeability test
BS5368-2  Windows Part 2. Watertightness test under static pressure
BS5368-3  Windows Part 3. Wind resistance tests
BS5368-4  Windows Part 4. Form of test report
BS 5385-1:1995 Wall and floor tiling. Code of practice for the design and installation of internal ceramic and natural stone wall tiling and mosaics in normal conditions
BS 5385-2:1991 Wall and floor tiling. Code of practice for the design and installation of external ceramic wall tiling and mosaics (including terra cotta and faience tiles)
BS 5385-3:1989 Wall and floor tiling. Code of practice for the design and installation of ceramic floor tiles and mosaics
BS 5385-4:1992 Wall and floor tiling. Code of practice for tiling and mosaics in specific conditions
BS 5385-5:1994 Wall and floor tiling. Code of practice for the design and installation of terrazzo tile and slab, natural stone and composition block floorings
BS 5390:1976 Code of practice for stone masonry
BS 5395-1:2000 Stairs, ladders and walkways. Code of practice for the design, construction and maintenance of straight stairs and winders
BS 5395-3:1985 Stairs, ladders and walkways. Code of practice for the design of industrial type stairs, permanent ladders and walkways
BS5400-1  General statement
BS5400-10  Code of practice for fatigue
BS5400-10C  Charts for classification of details w u u (extracted from BS 5400 Steel, concrete and composite bridges Part 10. Cc
BS5400-10C:1999  Charts for classification of details w u u (extracted from BS 5400 Steel, concrete and compositebridges Part 10. Cc
BS5400-2  Specification for loads
BS5400-3  Code of practice for design of steel bridges
BS5400-3-2000  Code of practice for design of steel bridges
BS5400-4  Code of practice for design of concrete bridges
BS5400-5  code of practice for design of composite bridges
BS5400-6  Specification for materials and workmanship, steel
BS5400-7  specification for materials & workmanship, concrete, reinforcement & prestressing tendons
BS5400-8  recommendations for materials & workmanship, concrete, reinforcement & prestressing tendons
BS5400-9.1  Bridge bearings Section 9.1 Code of practice for design of bridge bearings
BS5400-9.2  Bridge bearings. Section 9.2 - Specification for materials, manufacture & installation of bridge bearings
BS 5427-1:1996 Code of practice for the use of profiled sheet for roof and wall cladding on buildings. Design
BS5481   Unplasticized PVC pipe and fittings for gravity sewers
BS5492-1977  Internal plastering
BS5492-1990  Internal plastering
BS5493   Protective coating of iron and steel structures against corrosion
BS5502  Code of practice for design & installation of services & facilities
BS5502-0  Introduction
BS5502-1  General considerations. Section1.0 - Introduction
BS5502-1.1 Design of buildings & structures for agriculturae. Part 1 - General considerations. Section 1.1 Materials
BS5502-1.3 Design of buildings & structures for agriculturae. Part 1 - General considerations. Section 1.3 Fire protection
BS5502-1.4 Design of buildings & structures for agriculturae. Part 1 - General considerations. Section 1.4 Energy
BS5502-1.5 Design of buildings & structures for agriculturae. Part 1 - General considerations. Section 1.5 Services
BS5502-1.6  General considerations. Section1.6 - Human & animal welfare
BS5502-1.7  General considerations. Section1.7 - Infestation
BS5502-11  Guide to regulations & sources of information
BS5502-2.1  General design & planning
BS5502-2.2 Design of buildings & structures for agriculturae. Part 2 - Special considerations. Section 2.2 Livestock buildings
BS5502-2.3 Design of buildings & structures for agriculturae. Part 2 - Special considerations. Section 2.3 Storage, conditioning & processing buildings
BS5502-2.4 Design of buildings & structures for agriculturae. Part 2 - Special considerations. Section 2.4 Crop production buildings
BS5502-2.5 Design of buildings & structures for agriculturae. Part 2 - Special considerations. Section 2.5 Service buildings
BS5502-20  Code of practice for general design considerations
BS5502-21  Code of practice for selection & use of construction materials
BS5502-22  Code of practice for design, construction & loading
BS5502-23  Code of practice for fire precautions
BS5502-3.1 Design of buildings & structures for agriculturae. Part 3 - Appendices: Legislation, technical & references. Section 3.1 Legislation
BS5502-3.11  External colours for farm buildings
BS5502-3.12  Sources of information
BS5502-3.2 Design of buildings & structures for agriculturae. Part 3 - Appendices: Legislation, technical & references. Section 3.2 Reference data: roof & wall sheeting & durability of materials
BS5502-3.5 Design of buildings & structures for agriculturae. Part 3 - Appendices: Legislation, technical & references. Section 3.5 Reference data: environment
BS5502-3.6 Design of buildings & structures for agriculturae. Part 3 - Appendices: Legislation, technical & references. Section 3.6 Reference data: space
BS5502-3.8  Dimensional coordination
BS5502-30  Code of practice for control of infestation
BS5502-31  Guide to the storage and handling of waste
BS5502-32  Guide to noise attenuation
BS5502-33  Guide to the control of odour pollution
BS5502-40  Code of practice for design & construction of cattle buildings
BS5502-41  Code of practice for design & construction of sheep buildings & pens
BS5502-42  Code of practice for design & construction of pig buildings
BS5502-43  Code of practice for design & construction of poultry buildings
BS5502-49  Code of practice for design & construction of milking premises
BS5502-50  Code of practice for design, construction & use of storage tanks & reception pits for livestock slurry
BS5502-51  Code of practice for design & construction of slatted, perforated & mesh floors for livestock
BS5502-52  Code of practice for design of alarm systems, emergency ventilation for livestock housing
BS5502-60  Code of practice for design & construction of buildings for mushrooms
BS5502-65  Code of practice for design & construction of crop processing buildings
BS5502-66  Code of practice for design & construction of chitting houses
BS5502-70  Code of practice for design & construction of ventilated on floor stores for combinable crops
BS5502-71  Code of practice for design & construction of ventilated stores for potatoes & onions
BS5502-72  Code of practice for design & construction of controlled environment stores for vegetables, fruit & flowers
BS5502-74  Code of practice for design & construction of bins & silos for combinable crops
BS5502-75  Code of practice for design & construction of forage stores
BS5502-80  Code of practice for design & construction of workshop, maintenance & inspection facilities
BS5502-81  Code of practice for design & construction of chemical stores
BS5502-82  Code of practice for design & construction of amenity buildings
BS 5531:1988 Code of practice for safety in erecting structural frames
BS 5534-1:1997 Code of practice for slating and tiling. Design
BS 5572:1994 Code of practice for sanitary pipework
BS 5572:1994 Code of practice for sanitary pipework
BS 5578-2:1978 Building construction - stairs. Modular co-ordination: specification for co-ordinating dimensions for stairs and stair openings
BS 5588-0:1996 Fire precautions in the design, construction and use of buildings. Guide to fire safety codes of practice for particular premises/applications
BS 5588-1:1990 Fire precautions in the design, construction and use of buildings. Code of practice for residential buildings
BS 5588-10:1991 Fire precautions in the design, construction and use of buildings. Code of practice for shopping complexes
BS 5588-11:1997 Fire precautions in the design, construction and use of buildings. Code of practice for shops, offices, industrial, storage and other similar buildings
BS 5588-4:1998 Fire precautions in the design, construction and use of buildings. Code of practice for smoke control using pressure differentials
BS 5588-5:1991 Fire precautions in the design, construction and use of buildings. Code of practice for firefighting stairs and lifts
BS 5588-5:1991 Fire precautions in the design, construction and use of buildings. Code of practice for firefighting stairs and lifts
BS 5588-6:1991 Fire precautions in the design, construction and use of buildings. Code of practice for places of assembly
BS 5588-7:1997 Fire precautions in the design, construction and use of buildings. Code of practice for the incorporation of atria in buildings
BS 5588-8:1999 Fire precautions in the design, construction and use of buildings. Code of practice for means of escape for disabled people
BS 5588-9:1999 Fire precautions in the design, construction and use of buildings. Code of practice for ventilation and air conditioning ductwork
BS 5606:1990 Guide to accuracy in building
BS5607  Safe use of explosives in the construction industry
BS 5619:1978 Code of practice for design of housing for the convenience of disabled people
BS 5628-1:1992 Code of practice for use of masonry. Structural use of unreinforced masonry
BS 5628-2:2000 Code of practice for use of masonry. Structural use of reinforced and prestressed masonry
BS 5628-3:2001 Code of practice for use of masonry. Materials and components, design and workmanship
BS 5655-1:1986 Lifts and service lifts. Safety rules for the construction and installation of electric lifts
BS 5655-10.1.1:1995 Lifts and service lifts. Specification for the testing and examination of lifts and service lifts. Electric lifts. Commissioning tests for new lifts
BS 5655-10.2.1:1995 Lifts and service lifts. Specification for the testing and examination of lifts and service lifts. Hydraulic lifts. Commissioning tests for new lifts
BS 5655-10:1986 Lifts and service lifts. Specification for the testing and inspection of electric and hydraulic lifts
BS 5655-13:1995 Lifts and service lifts. Recommendations for vandal resistant lifts
BS 5655-14:1995 Lifts and service lifts. Specification for hand-powered service lifts and platform hoists
BS 5655-2:1988 Lifts and service lifts. Safety rules for the construction and installation of hydraulic lifts
BS 5655-5:1989 Lifts and service lifts. Specification for dimensions of standard lift arrangements
BS 5655-6:1990 Lifts and service lifts. Code of practice for selection and installation
BS 5655-7:1983 Lifts and service lifts. Specification for manual control devices, indicators and additional fittings
BS 5655-8:1983 Lifts and service lifts. Specification for eyebolts for lift suspension
BS 5655-9:1985 Lifts and service lifts. Specification for guide rails
BS 5656-1:1997 Safety rules for the construction and installation of escalators and passenger conveyors. Specification and proformas for test and examination of new installations
BS5669-1  Particleboard. Part 1 - Methods of sampling, conditioning & test
BS5669-2  Particleboard. Part 2 - specification for wood chipboard
BS5669-3  Particleboard. Part 3 - specification for oriented strand board (OSB)
BS5669-4  Particleboard. Part 4 - specification for cement bonded particleboard
BS5669-5  Particleboard. Part 5 - code of practice for the selection & application of particleboard for specificpurposes
BS5713   Specification for hemertically sealed flat double glazing units
BS 5720:1979 Code of practice for mechanical ventilation and air conditioning in buildings
BS 5810:1979 Code of practice for access for the disabled to buildings
BS5835   Recommendations for Testing of aggregates. Part 1- Compactibility test for graded aggregates
BS 5837:1991 Guide for trees in relation to construction
BS 585-1:1989 Wood stairs. Specification for stairs with closed risers for domestic use, including straight and winder flights and quarter or half landings
BS 585-2:1985 Wood stairs. Specification for performance requirements for domestic stairs constructed of wood-based materials
BS 5872:1980 Specification for locks and latches for doors in buildings
BS 5896:1980 Specification for high tensile steel wire and strand for the prestressing of concrete
BS5911-100  Specification for unreinforced and reinforced pipes and fittings with flexible joints
BS5911-101  Specification for glass composite concrete (GCC) pipes & fittings with flexible joints
BS5911-103  Specification for prestressed non-pressure pipes and fittings with flexible joints
BS5911-110  Specification for ogee pipes and fittings (including perforated)
BS5911-114  Specification for porous pipes
BS5911-120  Specification for reinforced jacking pipes with flexible joints
BS5911-2  Specification for inspection chambers
BS5911-200  Specification for unreinforced and reinforced manholes and soakaways of circular cross-section
BS5911-230  Specification for road gullies and gully cover slabs
BS5911-3  Specification for pipes & fittings with ogee joints
BS5930   Code of practice for site investigation
BS594-1 Hot rolled asphalt for roads and other paved areas — Part 1: Specification for constituent materials and asphalt mixtures
BS594-2 Hot rolled asphalt for roads and other paved areas — Part 2: Specification for the transport, laying and compaction of rolled asphalt
BS5950-1  Code of practice for design - Rolled and welded sections
BS5950-2  Specification for materials, fabrication and erection - Rolled and welded sections
BS5950-3.1  Code of practice for design of simple and continuous composite beams
BS5950-4  Code of practice for design of composite slabs with profiled steel sheeting
BS5950-5  Code of practice for design of cold formed thin gauge sections
BS5950-6  Code of practice for design of light gauge profiled steel sheeting
BS5950-7  Specification for materials and workmanship - cold formed sections
BS5950-8  Code of practice for fire resistant design
BS5950-9  Code of practice for stressed skin design
BS 5964-1:1990 Building setting out and measurement. Methods of measuring, planning and organization and acceptance criteria
BS 5964-2:1996 Building setting out and measurement. Measuring stations and targets
BS 5964-3:1996 Building setting out and measurement. Check-lists for the procurement of surveys and measurement services
BS 5973:1993 Code of practice for access and working scaffolds and special scaffold structures in steel
BS 5974:1990 Code of practice for temporarily installed suspended scaffolds and access equipment
BS5975 Code of practice for falsework
BS5977-1 Lintel. Part 1: Method for assessment of load
BS5977-2  Lintel. Part 2 - specification for prefabricated lintels
BS598-104 Sampling and examination of bituminous mixtures for roads and other paved areas — Part 104: Methods of test for the determination of density and compaction
BS 6019:1980 Recommendations for performance standards in building: contents and presentation
BS6031  Code of practice for Earthworks
BS 6073-1:1981 Precast concrete masonry units. Specification for precast concrete masonry units
BS 6073-2:1981 Precast concrete masonry units. Method for specifying precast concrete masonry units
BS6089 Assessment of concrete strength in existing structures
BS6093   Design of joints and jointing in building construction
BS6100-1  Glossary of building and civil engineering terms. Part 1- General and miscellaneous - Section 1.0 General
BS 6150:1991 Code of practice for painting of buildings
BS6164 Code of practice for safety in tunnelling in the  construction industry
BS6180 Barriers in and about buildings - Code of practice
BS 6187:2000 Code of practice for demolition
BS6213-1982  Selection of construction sealants - Guide
BS6213-2000  Selection of construction sealants - Guide
BS 6229:1982 Code of practice for flat roofs with continuously supported coverings
BS6262-1982  Glazing for buildings
BS6262-4 Glazing for buildings. Part 4: Safety related to human impact
BS 6270-1:1982 Code of practice for cleaning and surface repair of buildings. Natural stone, cast stone and clay and calcium silicate brick masonry
BS 6270-2:1985 Code of practice for cleaning and surface repair of buildings. Concrete and precast concrete masonry
BS 6297:1983 Code of practice for design and installation of small sewage treatment works and cesspools
BS 63-1:1987 Road aggregates. Specification for single-sized aggregate for general purposes
BS 63-2:1987 Road aggregates. Specification for single-sized aggregate for surface dressing
BS6338   Chromate conversion coatings on electroplated zinc
BS6349-1 Maritime structures – Part 1: Code of practice for general criteria
BS6349-2 Code of practice for Maritime  structures — Part 2: Design of quay walls, jetties and dolphins
BS6349-3 Code of practice for Maritime structures — Part 3: Design of dry docks, locks, slipways and shipbuilding berths, shiplifts and dock and lock gates
BS6349-4 Maritime structures — Part 4: Code of practice for design of fendering and mooring systems
BS6349-6 Maritime structures — Part 6: Design of inshore moorings and floating structures
BS6349-7 Maritime structures — Part 7: Guide to the design and construction of breakwaters
BS 6367:1983 Code of practice for drainage of roofs and paved areas
BS 6367:1983 Code of practice for drainage of roofs and paved areas
BS 6375-1:1989 Performance of windows. Classification for weathertightness (including guidance on selection and specification)
BS 6375-2:1987 Performance of windows. Specification for operation and strength characteristics
BS6398   Bitumen damp-proof courses for masonry
BS 6398:1983 Specification for bitumen damp-proof courses for masonry
BS6399-1 Loading for buildings Part 1. Code of practice for dead and imposed loads
BS6399-2  Loading for buildings. Part 2 - Code of practice for wind loads
BS6399-3 Loading for buildings Part 3. Code of practice for imposed roof loads
BS6431-1  Spec for classification & marking, including definitions & characteristics
BS6431-10  Method for determination of dimensions & surface quality
BS6431-11  Method for determination of water absorption
BS6431-12  Method for determination of modulus of rupture
BS6431-13  Method for determination of scratch hardness of surface according to Mohs
BS6431-14  Method for determination of resistance to deep abrasion. Unglazed tiles
BS6431-15  Method for determination of linear thermal expansion
BS6431-16  Method for determination of resistance to thermal shock
BS6431-17  Method for determination of crazing resistance. Glazed tiles
BS6431-18  Method for determination of chemical resistance. Glazed tiles
BS6431-19  Method for determination of chemical resistance. Glazed tiles
BS6431-2  Spec for extruded ceramic tiles with a low water absorption 
BS6431-20  Method for determination of resistance to surface abrasion. Glazed tiles
BS6431-21  Method for determination of moisture expansion using boiling water. Glazed tiles
BS6431-22  Method for determination of frost resistance
BS 644-1:1989 Wood windows. Specification for factory assembled windows of various types
BS 644-2:1958 Wood windows. Wood double hung sash windows
BS 644-3:1951 Wood windows. Wood double-hung sash and case windows (Scottish type)
BS 6457:1984 Specification for reconstructed stone masonry units
BS 6465-1:1994 Sanitary installations. Code of practice for scale of provision, selection and installation of sanitary appliances
BS 6465-2:1996 Sanitary installations. Code of practice for space requirements for sanitary appliances
BS 648:1964 Schedule of weights of building materials
BS 648:1964 Schedule of weights of building materials
BS 6510:1984 Specification for steel windows, sills, window boards and doors
BS 6515:1984 Specification for polyethylene damp-proof courses for masonry
BS 6576:1985 Code of practice for installation of chemical damp-proof courses
BS6577   Mastic asphalt for bldg (natural rock asphalt aggregate)
BS6610-1985  Pozzolanic cement with pulverized-fuel ash as pozzolana
BS6610-1996  Pozzolanic cement with pulverized-fuel ash as pozzolana
BS 6649:1985 Specification for clay and calcium silicate modular bricks
BS 6651:1999 Code of practice for protection of structures against lightning
BS6677-1 Clay and calcium silicate pavers for flexible  pavements — Part 1: Specification for pavers
BS 6699:1992 Specification for ground granulated blastfurnace slag for use with Portland cement
BS 6717:2001 Precast, unreinforced concrete paving blocks. Requirements and test methods
BS6906-3  Determination of water flow normal to the plane of the geotextile under a constant head
BS6906-8  Determination of sand-geotextile frictional behaviour by derect shear
BS 6954-1:1988 Tolerances for building. Recommendations for basic principles for evaluation and specification
BS 6954-2:1988 Tolerances for building. Recommendations for statistical basis for predicting fit between components having a normal distribution of sizes
BS 6954-3:1988 Tolerances for building. Recommendations for selecting target size and predicting fit
BS 7000-4:1996 Design management systems. Guide to managing design in construction
BS 7036-1:1996 Code of practice for safety at powered doors for pedestrian use. General
BS 7036-2:1996 Code of practice for safety at powered doors for pedestrian use. Straight and curved sliding doors and prismatic and folding doors
BS 7036-3:1996 Code of practice for safety at powered doors for pedestrian use. Swing doors and balanced doors
BS 7036-4:1996 Code of practice for safety at powered doors for pedestrian use. Low energy swing doors
BS 7036-5:1996 Code of practice for safety at powered doors for pedestrian use. Revolving doors
BS 7171:1989 Specification for mobile elevating work platforms
BS 7212:1989 Code of practice for safe use of construction hoists
BS 7255:2001 Code of practice for safe working on lifts
BS7263-1-1990  Precast concrete flags, kerbs, channels, edgings & quadrants. Part 1- precast, unreinforced concrete paving flags & comlementary fittings - requirements & test methods
BS7263-1-1994  Precast concrete flags, kerbs, channels, edgings & quadrants. Part 1- precast, unreinforced concrete paving flags & comlementary fittings - requirements & test methods
BS7263-1-2001  Precast concrete flags, kerbs, channels, edgings & quadrants. Part 1- precast, unreinforced concrete paving flags & comlementary fittings - requirements & test methods
BS7263-2 Precast concrete flags, kerbs, channels, edgings & quadrants. Part 2: Code of practice for laying
BS7263-3  Precast concrete flags, kerbs, channels, edgings & quadrants. Part 1- precast, unreinforced concrete kerbs,channels, edgings & quadrants - requirements & test methods
BS729   Spec for hot dip galvanized coatings on iron & steel articles
BS 7295-1:1990 Fusion bonded epoxy coated carbon steel bars for the reinforcement of concrete. Specification for coated bars
BS 7295-2:1990 Fusion bonded epoxy coated carbon steel bars for the reinforcement of concrete. Specification for coatings
BS 7307-1:1990 Building tolerances. Measurement of buildings and building products. Methods and instruments
BS 7307-2:1990 Building tolerances. Measurement of buildings and building products. Position of measuring points
BS 7308:1990 Method for presentation of dimensional accuracy data in building constructions
BS 7334-1:1990 Measuring instruments for building construction. Methods for determining accuracy in use: theory
BS 7334-2:1990 Measuring instruments for building construction. Methods for determining accuracy in use: measuring tapes
BS 7334-3:1990 Measuring instruments for building construction. Methods for determining accuracy in use: optical levelling instruments
BS 7334-4:1992 Measuring instruments for building construction. Methods for determining accuracy in use of theodolites
BS 7334-5:1992 Measuring instruments for building construction. Methods for determining accuracy in use of optical plumbing instruments
BS 7334-6:1992 Measuring instruments for building construction. Methods for determining accuracy in use of laser instruments
BS 7334-7:1992 Measuring instruments for building construction. Methods for determining accuracy in use of instruments when used for setting out
BS 7334-8:1992 Measuring instruments for building construction. Methods for determining accuracy in use of electronic distance-measuring instruments up to 150 m
BS 7361-1:1991 Cathodic protection. Code of practice for land and marine applications
BS 7375:1996 Code of practice for distribution of electricity on construction and building sites
BS 7412:2002 Plastics windows made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles. Specification
BS 7413:2002 Unplasticized polyvinyl chloride (PVC-U) profiles for windows and doors. Specification
BS7419   Specification for Holding down bolts
BS743  Materials for damp-proof courses
BS 743:1970 Specification for materials for damp-proof courses
BS 747:2000 Reinforced bitumen sheets for roofing. Specification
BS7533-1 Pavements constructed with clay, natural stone or concrete pavers – Part 1: Guide for the structural design of heavy duty pavements constructed of clay pavers or precast concrete paving blocks
BS7533-2 Pavements constructed with clay, natural stone or concrete pavers — Part 2: Guide for the structural design of lightly trafficked pavements constructed of clay  pavers or precast concrete paving blocks
BS7533-4 Pavements constructed with clay, natural stone or concrete pavers
BS7533-6 Part 4. Code of practice for the construction of pavements of precast concrete flags or natural stone slabs
BS7543  Guide to Durability of buildings and building elements, products and components
BS76 Specification for tars for road purposes
BS7668   Weldable structural steels - Hot finished structural 
BS 7801:1995 Code of practice for safe working on escalators and passenger conveyors in use
BS 7832:1995 Performance standards in building. Checklist for briefing. Contents of brief for building design
BS7861-1 Strata reinforcement support system components used in coal mines — Part 1: Specification for rockbolting
BS7861-2 Strata reinforcement support system components used in coal mines — Part 2: Specification for birdcaged cablebolting
BS7903 Guide to selection and use of gully tops and manhole covers for installation within the highway
BS 7913:1998 Guide to the principles of the conservation of historic buildings
BS 7974:2001 Application of fire safety engineering principles to the design of buildings. Code of practice
BS8000-1  Code of practice for excavation & filling
BS8000-10  Code of practice for plastering & rendering
BS8000-11.1  Part 11- Code of practice for wall & floor tiling. Section 11.1- Ceramic tiles, Terrazzo tiles & mosaics
BS8000-11.2  Part 11- Code of practice for wall & floor tiling. Section 11.2- Natural stone tiles
BS8000-12  Code of practice for decorative wallcoverings & painting
BS8000-13  Code of practice for above ground drainage and sanitary appliances
BS8000-14  Code of practice for below ground drainage
BS8000-15  Code of practice for hot & cold water services
BS8000-16  Code of practice for sealing joints in bldg using sealants
BS8000-2.1  Mixing & transporting concrete
BS8000-2.2  Sitework with in situ & precast concrete
BS8000-3  Code of practice for masonry
BS8000-4  Code of practice for waterproofing
BS8000-5  Code of practice for carpentry, joinery & general fixings
BS8000-6  Code of practice for slating & tiling of roofs & claddings
BS8000-7  Code of practice for glazing
BS8000-8  Code of practice for Plasterboard partitions & dry linings
BS8000-9  Code of practice for cement-sand floor sreeds & concrete floor topings
BS8000-9-1999 Workmanship on building sites. Cementitious levelling screeds and wearing screeds. Code of practice
BS8002   Earth retaining structures
BS8004  Code of practice for foundations
BS8005-0  Sewerage. Part 0 - Introdution & guide to data sources & documentation
BS8005-1  Sewerage. Part 1- guide to new sewerage construction
BS8005-2  Sewerage. Part 1- guide to pumping station & pumping mains
BS8005-3  Sewerage. Part 3 - guide to planning & construction of sewers in tunnel
BS8005-4  Sewerage. Part 4 - guide to desgn & construction of outfalls
BS8005-5  Sewerage. Part 5 - guide to rehabilitation of sewers
BS8006   Code of practice for strengthened, reinforced soils & other fills
BS8007   Design of concrete structures for retaining aqueous liquids 
BS8008   Guide to safety precaution & procedures for the construction & descent of machine-bored shafts for piling& other purposes
BS 8010-2.3:1988 Code of practice for pipelines. Pipelines on land: design, construction and installation. Asbestos cement
BS 8010-2.4:1988 Code of practice for pipelines. Pipelines on land: design, construction and installation. Prestressed concreted pressure pipelines
BS 8010-2.7:1989 Code of practice for pipelines. Pipelines on land: design, construction and installation. Precast concrete
BS 8102:1990 Code of practice for protection of structures against water from the ground
BS8103-1-1986  Structure design of low-rise bldg. Part 1- Code of practice for stability, site investigation, foundations & ground floor slabs for housing
BS8103-1-1995  Structure design of low-rise bldg. Part 1- Code of practice for stability, site investigation, foundations & ground floor slabs for housing
BS8103-2  Structure design of low-rise bldg. Part 2- Code of practice for masory walls for housing
BS8103-3  Structural design of low-rise buildings Part 3. Code of practice for timber floors and roofs for housing
BS8103-4  Structure design of low-rise bldg. Part 4 - Code of practice for suspended concrete floors for housing
BS8110-1 Structural use of concrete. Code of practice for design and construction
BS8110-2  Structural use of concrete.  Part 2 - Code of practice for special circumstances
BS8110-3  Structural use of concrete. Part 3 - Design charts for singly reinforced beams, doubly reinforced beamsand rectangular columns
BS812-1  Methods for determination of particle size and shape
BS812-100 General requirements for apparatus and calibration
BS812-101  Guide to sampling and testing aggregates
BS812-102  Methods for sampling
BS812-103.1  Methods for determination of particle size distribution
BS812-103.2  Sedimentation test
BS812-104  Methods for qualitative and quatitative petrographic examination of aggregates
BS812-105.1  Flakiness index
BS812-105.2  Elongation index of coarse aggregate
BS812-106  Method for determination of shell content in coarse aggregate
BS812-109  Methods for determination of moisture content
BS812-110  Methods for determination of aggregate crushing value (ACV)
BS812-111  Methods for determination of ten per cent fines value (TFV)
BS812-112  Methods for determination of aggregate impact value (AIV)
BS812-113  Method for determination of aggregate abrasion value (AAV)
BS812-114  Method for determination of polished-stone value
BS812-117  Method for determination of water-soluble chloride salts
BS812-118  Methods for determination of sulphate content
BS812-119  Method for determination of acid-soluble material in fine aggregate
BS812-120  Method for testing and classifying drying shrinkage of aggregates in concrete
BS812-121  Method for determination of soundness
BS812-123  Method for determination of alkali-silica reactivity - concrete prism method
BS812-124  Method for determination of frost-heave
BS812-2  Method for determination of density
BS812-3  Method for determination of mechanical properties
BS 8200:1985 Code of practice for design of non-loadbearing external vertical enclosures of buildings
BS 8201:1987 Code of practice for flooring of timber, timber products and wood based panel products
BS8203-1987  Installation of sheet & tile flooring
BS8203-2001  Installation of sheet & tile flooring
BS8204-1 Screeds, bases and in-situ floorings. Concrete bases and cement sand levelling screeds to receive floorings. Code of practice
BS 8204-1:1999 Screeds, bases and in-situ floorings. Concrete bases and cement sand levelling screeds to receive floorings. Code of practice
BS 8204-2:1999 Screeds, bases and in-situ floorings. Concrete wearing surfaces. Code of practice
BS8204-3  In-situ floorings. Part 3 - code of practice for polymer modified cementitious wearing surfaces
BS8204-4  In-situ floorings. Part 4 - code of practice for terrazzo wearing surfaces
BS8204-5  Screeds bases & in-situ floorings. Part 5 - code of practice for mastic asphalt underlays & wearing surfaces
BS8204-6  Screeds bases & in-situ floorings. Part 6 - synthetic resin floorings - code of practice
BS 8206-1:1985 Lighting for buildings. Code of practice for artificial lighting
BS 8206-2:1992 Lighting for buildings. Code of practice for daylighting
BS 8206-2:1992 Lighting for buildings. Code of practice for daylighting
BS 8207:1985 Code of practice for energy efficiency in buildings
BS 8208-1:1985 Guide to assessment of suitability of external cavity walls for filling with thermal insulants. Existing traditional cavity construction
BS 8210:1986 Guide to building maintenance management
BS 8212:1995 Code of practice for dry lining and partitioning using gypsum plasterboard
BS8213-1 Windows, doors and rooflights. Code of practice for safety in use and during cleaning of windows and doors (including guidance on cleaning materials and methods)
BS8213-4  Windows, doors & rooflights. Part 4 - code of practice for the installation of replacement windows & doorsets in dwellings
BS 8214:1990 Code of practice for fire door assemblies with non-metallic leaves
BS 8215:1991 Code of practice for design and installation of damp-proof courses in masonry construction
BS 8217:1994 Code of practice for built-up felt roofing
BS 8218:1998 Code of practice for mastic asphalt roofing
BS 8233:1999 Sound insulation and noise reduction for buildings. Code of practice
BS8290-1 Suspended ceilings. Code of practice for design
BS8290-2  Suspended ceilings. Part 2 - specification for performance of components & assemblies
BS8290-3 Suspended ceilings. Code of practice for installation and maintenance
BS 8297:2000 Code of practice for Design and installation of non-loadbearing precast concrete cladding
BS 8298:1994 Code of practice for design and installation of natural stone cladding and lining
BS 8300:2001 Design of buildings and their approaches to meet the needs of disabled people. Code of practice
BS8301   Code of practice for Building drainage
BS8301 commentary on building drainage for the users of vitrified clay pipes
BS 8666:2000 Specification for scheduling, dimensioning, bending and cutting of steel reinforcement for concrete
BS882  Specification for Aggregates from natural sources for concrete
BS952-1-1978 Glass for glazing. Part1: classification
BS952-1-1995 Glass for glazing. Part1: classification
BS952-2  Glass for glazing. Part 2 - terminology for work on glass
BS9863-2  Procedure for determination of thickness of single layers of multilayer products
BS990  Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete & lightweight aggregate concrete with open structure
CP 1007:1955 Maintained lighting for cinemas
CP102   Code of practice for protection of buildings against water from the ground
CP151-1  wooden doors
CP3010  Safe use of cranes (mobile cranes, tower cranes & derrick cranes
CP3-5-2 Code of Basic data for the design of buildings. Chapter V - Loading. Part 2 - Wind Loads
CP3-9 Code of functionnal requirements of buildings. Chapter 9: Durability
DD  ENV13282 Hydraulic road binders. Composition, specifications and conformity criteria
DD ENV ISO 10722-1  Procedure for simulating damage during installation - Part 1 Installation in granular materials
DD ENV ISO 12438   Screening test method for determining the resistance to oxidation 
DD ENV 10080:1996 Steel for the reinforcement of concrete. Weldable ribbed reinforcing steel B500. Technical delivery conditions for bars, coils and welded fabric
DD ENV 1090-1:1998 Execution of steel structures. General rules and rules for buildings (together with United Kingdom national application document)
DD ENV 1090-3:2000 Execution of steel structures. Supplementary rules for high yield strength steels
DD ENV 1090-4:2001 Execution of steel structures. Supplementary rules for hollow section structures
DD ENV 1090-6:2001 Execution of steel structures. Supplementary rules for stainless steel
DD ENV 12056.3 Gravity drainage systems inside buildings. Roof drainage, layout and calculation
DD ENV 1209 Ductwork
DD ENV12404   Durability of wood & wood-based products - Assessment of the effectiveness of a masonry fungicide toprevent grouth into wood of dry rot
DD ENV1504-9  Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality
DD ENV 1627:1999 Windows, doors, shutters. Burglar resistance. Requirements and classification
DD ENV 197-1:1995 Cement. Composition, specifications and conformity criteria. Common cements
DD ENV197-1  Cement - Composition, specifications and conformity criteria - Part 1- Common cements
DD ENV197-2  Cement - Part 2 - Conformity evaluation
DD ENV 1991-1:1996 Basis of design and actions on structures. Basis of design (together with United Kingdom national application document)
DD ENV 1991-2-1:1996 Actions on structures. Actions on structures. Densities, self-weight and imposed loads (together with United Kingdom Application Document)
DD ENV 1991-2-2:1996 Basis of design and actions on structures. Actions on structures exposed to fire (together with United Kingdom National Application Document)
DD ENV 1991-2-3:1996 Basis of design and actions on structures. Actions on structures. Snow loads
DD ENV 1991-2-6:2000 Basis of design and actions on structures. Actions on structures. Actions during execution
DD ENV 1991-3:2000 Eurocode 1. Basis of design and actions on structures. Traffic loads on bridges (United Kingdom Application Document)
DD ENV1991-3 Eurocode 1: Basis of design and actions on structures – Part 3: Traffic loads on bridges
DD ENV 1991-4:1996 Basis of design and actions on structures. Actions in silos and tanks
DD ENV1992-1-1 EUROCODE 2  Design of concrete structures. Part 1 - General rules and rules for buildings (together with United Kingdom National Application Document)
DD ENV1992-1-2 EUROCODE 2  Design of concrete structures. Part 1.2 General rules - Structural fire design (together with United Kingdom National Application Document)
DD ENV1992-1-3  Design of concrete structures. Part 1.3 - general rules - precast concrete elements & structures
DD ENV1992-1-4 EUROCODE 2  Design of concrete structures. Part 1.4 General rules - Lightweight aggregate oncretewithclosed structure (together with United Kingdom National Applicatio
DD ENV1992-1-5 EUROCODE 2  Design of concrete structures. Part 1.5 General rules - Structures with unbonded andexternal
DD ENV1992-1-6 EUROCODE 2  Design of concrete structures - Part 1.6 General rules - Plain concrete structures 
DD ENV1992-2  EUROCODE 2   Design of concrete structures Part 2. Concrete bridges (together with United Kingdom National Application Document)
DD ENV1992-4  Design of concrete structures. Part 4 - liquid retaining & containing structures
DD ENV 1993-1-1:1992 Eurocode 3. Design of steel structures. General rules and rules for buildings (together with United Kingdom National Application Document)
DD ENV 1993-1-2:2001 Eurocode 3. Design of steel structures. General rules. Structural fire design (together with United Kingdom National Application Document)
DD ENV 1993-1-3:2001 Eurocode 3. Design of steel structures. General rules. Supplementary rules for cold formed thin gauge members and sheeting
DD ENV 1994-1-1:1994 Eurocode 4: design of composite steel and concrete structures. General rules and rules for buildings (together with United Kingdom National Application Document)
DD ENV 1994-2:2001 Eurocode 4: design of composite steel and concrete structures. Composite bridges (together with United Kingdom National Application Document)
DD ENV1994-2 Eurocode 4: Design of composite steel & concrete structures. Part 2: Composite bridges
DD ENV 1995-1-1:1994 Eurocode 5:Design of timber structures. Eurocode 5:Design of timber structures. General rules and rules for buildings (together with United Kingdom National Application Document)
DD ENV 1995-1-2:2000 Eurocode 5:Design of timber structures. General rules. Structural fire design (together with United Kingdom National Application Document)
DD ENV 1996-1-1:1996 Eurocode 6. Design of masonry structures. General rules for buildings. General rules for buildings. Rules for reinforced and unreinforced masonry (together with United Kingdom National Application Document)
DD ENV 1996-1-2:1997 Eurocode 6. Design of masonry structures. General rules for buildings. Structural fire design (together with United Kingdom National Application Document)
DD ENV 1996-1-3:2001 Eurocode 6. Design of masonry structures. General rules for buildings. Detailed rules on lateral loading (together with United Kingdom National Application Document)
DD ENV 1996-2:2001 Eurocode 6. Design of masonry structures. Design, selection of materials and execution of masonry (together with United Kingdom National Application Document)
DD ENV 1996-3:2001 Eurocode 6. Design of masonry structures. Simplified calculation methods and simple rules for masonry (together with United Kingdom National Application Document)
DD ENV 1997-1:1995 Eurocode 7. Geotechnical design. General rules (together with United Kingdom National Application Document)
DD ENV 1997-2:2000 Eurocode 7. Geotechnical design. Design assisted by laboratory testing
DD ENV1997-2 Eurocode 7: Geotechnical design – Part 2: Design assisted by laboratory testing
DD ENV 1997-3:2000 Eurocode 7. Geotechnical design. Design assisted by fieldtesting
DD ENV1997-3 Eurocode 7. Geotechnical design. Design assisted by fieldtesting
DD ENV 1998-1-1:1996 Eurocode 8: Design provisions for earthquake resistance of structures. General rules. Seismic actions and general requirements for structures
DD ENV 1998-1-2:1996 Eurocode 8: Design provisions for earthquake resistance of structures. General rules. General rules for buildings
DD ENV 1998-1-3:1996 Eurocode 8: Design provisions for earthquake resistance of structures. General rules. Specific rules for various materials and elements
DD ENV 1998-1-4:1996 Eurocode 8: Design provisions for earthquake resistance of structures. General rules. Strengthening and repair of buildings
DD ENV 1998-2:1996 Eurocode 8: Design provisions for earthquake resistance of structures. Bridges
DD ENV1998-2 Eurocode 7: Design provisions for earthquake resistance of structures. Part 2: Bridges
DD ENV 1998-3:1997 Eurocode 8: Design provisions for earthquake resistance of structures. Towers, masts and chimneys
DD ENV 1998-5:1996 Eurocode 8: Design provisions for earthquake resistance of structures. Foundations, retaining structures and geotechnical aspects
DD ENV1998-5 Eurocode 8: Design provisions for earthquake resistance of structures. Foundations, retaining structures and geotechnical aspects
DD ENV 1999-1-1:2000 Eurocode 9. Design of aluminium structures. General rules. General rules and rules for buildings
DD ENV 1999-1-2:2000 Eurocode 9. Design of aluminium structures. General rules. Structural fire design
DD ENV 1999-2:2000 Eurocode 9. Design of aluminium structures. Structures susceptible to fatigue
DD ENV 206:1992 Concrete. Performance, production, placing and compliance criteria
DD ENV413-1  Masonry cement. Part 1 - Specification
DD ENV 61024-1:1995 Protection of structures against lightning. General principles
DD 175:1988 Code of practice for the identification of potentially contaminated land and its investigation
DD 205:1991 Specification for the performance of damp-proof courses installed to prevent rising damp
DD 218:1995 Testing aggregates. Method for determination of alkali-silica reactivity. Concrete prism method
DD 86-1:1983 Damp-proof courses. Methods of test for flexural bond strength and short term shear strength
DD 86-2:1984 Damp-proof courses. Method of test for creep deformation
DD 86-3:1990 Damp-proof courses. Guide to characteristic strengths of damp-proof course material used in masonry
PAS26 Manhole tops intended for use on service station forecourts and pavement areas — Requirements, performance and marking
PD CR ISO 13434   Guidelines on durability of geotextiles & geotextile-related products
PD6472  Guide to specifying the quality of building mortars
PD6534  Concrete. Performance, production, placing & compliance criteria
PP7312-1988  Extracts from British Standards for students of structure design
PP7312-1998  Extracts from British Standards for students of structure design
Comments