KEC Faculty Profile

Paper Published in National Journals

1. K.Krishnamurthy and V.P.Arunachalam, “Influence of Fillet Radius and aspect ratio in solidification of aluminium casting”, Indian Foundry Journal, Vol.50, No.12, Dec 2004.

2. K.Krishnamurthy and V.P. Arunachalam, “Effect of Chill Position and Size during Solidification of Aluminium Casting”, Indian Foundry Journal, Vol.51, No.9, Sep 2005.

3. R. Kirubashankar, K.Krishnamurthy and J.Indra, “Remote monitoring system for distributed control of industrial plant process”, Journal of Science and Industrial Research, Vol.68, No.2, pp.858-860, October 2009.

4. K. Saravanan, K.Krishnamurthy, B.Meenakshipriya and S.Sathiyavathi, “Design of pH Neutralization Pilot Plant for ETP”, Process and Plant Engineering, Vol. 27, No.3, pp.53-55, December 2009.

5. S. Sathiyavathi and K.Krishnamurthy, “PID control of ball and beam system – A real time experimentation”, Journal of Scientific & Industrial Research, Vol.72, No.8, pp.481-484, August 2013.

6. B.Meenakshipriya, K.Saravanan, K.Krishnamurthy,  P.Kanthabhabha, “pH control of Industrial Effluent using CDM Based PI Controllers”, Indian Journal of Chemical Technology, Vol.22, pp.141-147, July 2015

7. C.Maheswari, K.Krishnamurthy, R. Parameshwaran and B.Meenakshipriya, “Experimental investigations on pilot plant SO2 emission control system”, Journal of Scientific and Industrial Research, Vol.74, pp.522-525, September 2015.

Paper Published in International Journals

1. C. Maheswari, R. Jeyanthi, K.Krishnamurthy and M.Sivakumar, “Implementation of Energy Management Structure for Street Lighting Systems”, Journal of Modern Applied Science, Vol.3, No.6, pp.30-37, June 2009.

2. K.Krishnamurthy, C. Maheswari, R. Udayarani and V. Gowtham, “Design and Fabrication of Coir Pith Prequetting Machine”, World Applied Sciences Journal, Vol.7, No.4, pp.552-558, November 2009.

3. R.Kirubashankar, K.Krishnamurthy, J.Indra and B.Vignesh, “Design and Implementation of web based remote supervisory control and information system”, Soft Computing and Engineering, Vol.1, No.4, pp.43-51, September 2011.

4. B.Meenakshipriya, K. Saravanan, K.Krishnamurthy and P.K.Bhabha, “Design and implementation of CDM-PI control strategy in pH neutralization system”, Asian Journal of Scientific Research, Vol.5, No.4, pp.78-92, 2012.

5. R. Kirubashankar and K.Krishnamurthy, “A real-time web-enabled platform for information monitoring and fault diagnosis in a distributed control system”, Instrumentation Science & Technology, Vol.41, No.3, pp.236-250, May 2013.

6. S.Sathiyavathy, K.Krishnamurthy, P.K.Bhaba and S.Somasundaram, “Hybrid iterative learning control design: Application to inverted pendulum”, International Journal of Simulation Systems, Science & Technology, Vol.14, No.4, pp.46-50, August 2013.

7. C. Maheswari and K.Krishnamurthy, “Experimental investigations on So2 removal process using wet scrubber”, International Journal on Pollution Research, Vol.32, No.3, pp.655-662, August 2013.

8. C.Maheswari, K.Krishnamurthy, B.Meenakshipriya and P.K.Bhaba, “Application of CDM-PI-P Controller for SO2 Emission Control Process”, Control Engineering and Applied Informatics, Vol.16, No.1, pp.40-49, 2014.

9. K.V. Maheshkumar, K.Krishnamurthy, P.Sathishkumar, S. Sahoo, E.Uddin, S.K.Pal and R.Rajasekar, “Research updates on grapheme oxide-based polymeric Nanocomposites”, Polymer Composite, Vol.35, No.12, pp.2297–2310, December 2014.

10. P.Ponnambalam, M.Praveenkumar, C.Dhanamjayulu and K.Krishnamurthy, “Control of 5×2 Stacked Multicell Converter for Solar Panel”, International Review of Automatic Control, Vol.7, No.2, pp.176-183, March 2014.

11. S.Sathiyavathi, K.Krishnamurthy, PK.Bhaba  and S.Somasundaram, “Hybrid ILC Strategy for Magnetic Ball Suspension System”, Journal of Applied Sciences, Engineering and Technology, Vol.7, No.20, pp.4355-4358, May 2014.

12. K.V.Mahesh Kumar, K.Krishnamurthy, P.Sathish Kumar, R.Rajasekar and A.Siva Kumar, “Effect of Mechanical behaviours of Graphene oxide reinforced compatibilized High density Polyethylene”, International Journal of ChemTech Research, Vol.6, No.3, pp.1894-1897, May 2014.

13. P.Ponnambalam, M.Praveenkumar and K.Krishnamurthy, “MPC for reduced voltage source multicell converter” Journal of Electrical Engineering, Vol.9, No.3, pp.493-499, 2014.

14. C. Maheswari, K.Krishnamurthy and R.Parameshwaran, “Modelling and Experimental analysis of packed column for SO2 emission control process”, Journal of Atmospheric Pollution Research, Vol.5, pp.464-470, 2014.

15. C. Maheswari, S.R.Arun, V.Magalingam, K.Jeevanraj and K.Krishnamurthy, “Optimization of PID controller parameters for SO2 emission control process using PSO Algorithm” Journal of Industrial Pollution Control, Vol.31, No.1, pp.41-45, 2015.

16. S.Ramakrishnan, K.Krishnamurthy, R.Sarathkumar and R.Rajasekar, “Theoretical Prediction on the Mechanical Behavior of Natural Fiber Reinforced Vinyl Ester Composites” Applied Science and Advanced Materials, Vol.1, No.3 pp.85-92, January 2015.

17. K.Krishnamurthy, C.Maheshwari, N.Nithyavathy, P.Mohanasundaram, P.Deepasundar and G.Thisanth, “Design and development of roof tile production mechanism Using advanced Embedded Processor Control”, International Journal of Innovative Research in Science, Engineering and Technology, Vol.4, Special Issue 4, pp.104-110, April 2015

18. V.Arunkumar, K.Krishnamurthy, B.Meenakshipriya, “Analysis and modeling of different types of converter in switched reluctance motor for reducing the torque ripple”, Innovations in Information, Embedded and Communication Systems, IEEE Digital Explore, Vol. 3 No. 05 pp. 1-6, 2015

19. P.Ravichandran, K.Krishnamurthy and B.Meenakshipriya, “A Comparison of Genetic Algorithm and Particle Swarm Optimisation to Minimize the Makespan for Parallel Line Job Shop Scheduling” Research Journal of Applied Sciences, Engineering and Technology, Vol.13, No.5 pp.409-415, 2016.

20. P.Ravichandran, K.Krishnamurthy and R.Parameshwaran, “A Hybrid PSO-CS Algorithm for Parallel Line Job Shop Scheduling to Minimize Makespan”, International World Applied Sciences Journal, Vol.34, No.07, pp.878-883, July 2016.

21. S.Ramakrishnan, K.Krishnamurthy and R.Rajasekar, “Dual Reinforcement Effect of Nanoclay and Jute Fiber on the Mechanical Properties of Polyester Resin”, Asian Journal of Research in Social Sciences and Humanities, Vol.6, No.12, pp.912-926, December 2016

22. M.Asfar, P.Naveenkumar, V.Naveenkumar and K.Krishnamurthy, “Online vibration suppression in lathe machine”, Journal of achievements in materials and manufacturing engineering, Vol.77, No.2, August 2016

23. G.Kalaiarasan, Giriraj Mannayee, M.Boopathi, Somanadh Mayakoti and K.Krishnamurthy, “Analysis of Hydraulics Actuator Speed Control using Digital Hydraulics” International Journal of Mechanical Engineering and Technology, Vol.8, No.7, pp.213-224, July 2017

24. S.Ramakrishnan, K.Krishnamurthy, R.Rajasekar and G.Rajeshkumar, “An experimental study on the effect of nano-clay addition on mechanical and water absorption behaviour of jute fibre reinforced epoxy composites”, Journal of Industrial Textiles, Vol.49, No.5, pp.597-620, August 2018

25. G.Kalaiarassan and K.Krishnamurthy, “Digital hydraulic single-link trajectory tracking control through flow-based control”, Journal of Measurement and Control, DOI: 10.1177/0020294019842889, May 2019

26. V.Arunkumar, K.Krishnamurthy, C.Maheswari, B.Meenakshipriya and R.Vinoth, “Removal of NOx from diesel engine exhaust by using different chemical absorbent in a lab-scale packed column system” Measurement and Control, DOI:10.1177/0020294019858167, 2019

27. K.V.Maheshkumar, K.Krishnamurthy, R.Rajasekar, P.Sathishkumar and Ganesh Chandra Nayak, “Influence of graphene oxide onthe static and dynamic mechanicalbehavior of compatibilizedpolypropylene Nanocomposites” Mechanical Testing/Materialography/ Analysis of Physical Properties, Vol.61, No.10, pp.986-990, October 2019

28. A.Shanmugam, K.Krishnamurthy, T.Mohanraj, “Experimental study of surface roughness and taper angle in abrasive water jet machining of 7075 Aluminium composite using Response Surface Methodology”, Surface Review and Letters, 10.1142/S0218625X19501129, 2019.

29. A.Shanmugam, K.Krishnamurthy, T.Mohanraj, “Experimental study of surface roughness and taper angle in abrasive water jet machining of 7075 Aluminium composite using Response Surface Methodology”, Surface Review and Letters, Vol.27, No.3, p.1950112, 2020.

30. C.Maheswari, E.B.Priyanka, S.Thangavel, B.Balasubramaniam, K.Krishnamurthy, V.Arun Kumar, “Design and Experimental Investigations on NOx Emission Control Using FOCDM (Fractional-Order-Based Coefficient Diagram Method)-PIλDμ Controller”, Journal European Des Systemes Automatises, Vol.53, No.5, pp.695-706, October 2020.

31. K.Krishnamurthy, P.Ravichandran, A.Shahid Naufal, R.Pradeep, K.M.Sai, HarishAdithiya, “Modeling and structural analysis of leaf spring using composite materials”, Materials Today: Proceedings, Vol.33, pp.4228-4232, December 2020. 

32. A.Muthukumar, K.Krishnamurthy, “Bus body manufacturing system via FEMA and fuzzy logic controller”, Methodologies and Application, Vol.25, pp.3889-3901, 2021.

33. S. Ramakrishnan, K.Krishnamurthy, G. Rajeshkumar, “Experimental Analysis of Tribological Behaviour of Jute Fiber-Reinforced Nanoclay Filled Epoxy Composites”,Materials, Design, and Manufacturing for Sustainable Environment, pp.1-14, February 2021. 

34. S.Ramakrishnan, K.Krishnamurthy, G.Rajeshkumar, M.Asim, “Dynamic Mechanical Properties and Free Vibration Characteristics of Surface Modified Jute Fiber/Nano-Clay Reinforced Epoxy Composites”, Journal of Polymers and the Environment, Vol.29, pp.1076-1088, March 2021.

35. A.Shanmugam, T.Mohanraj, K.Krishnamurthy, A.K.Gur, "Multi-Response Optimization on Abrasive Waterjet Machining of Glass Fiber Reinforced Plastics using Taguchi Method Coupled with Topsis", Surface Review and Letters, Vol.28, No.12, p.2150120, 2021     

36. B.S.Hari, K.V.Mahesh Kumar, K.Krishnamurthy, P.Sathish Kumar, V.K.Gobinath, R.Sachinbala, R.Rajasekar, "Influence of graphene oxide on the morphological and mechanical behaviour of compatibilized low density polyethylene nanocomposites" Materials Today: Proceedings, Vol.39, No.4, pp.1487-1493 .

37. R.Parthiban, P.Ponnambalam, K.Krishnamurthy "Analysis of area saving and efficiency enhancement of photovoltaic system combined with thermoelectric generator" Advances in electrical engineering, electronics and energy, Vol.8, p.100553, June 2024.

38. S.Veerakumar, K.Krishnamurthy, B.Meenakshipriya, M.Arunkumar "Optimization of gas metal arc welding parameters for dissimilar steel welds: A case study on duplex stainless steel 2205 and stainless steel 316L" Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.      

39.  A.Shanmugam, T.Mohanraj, K.Krishnamurthy, A.K.Gur, Ugur Caligulu "Multi-response optimization on abrasive water jet machining of aluminum 7075 alloy using Taguchi-DEAR methodology" Proceedings of the institution of mechanical engineers, Part-E: Journal of process mechanical engineering, Vol.238, No.6, pp.2561-2567.  

Funded Research Projects