Standing Rigging

  • Mast
    • Stays
      • Forestay
        • non-adjustable
        • 3mm
        • furling drum 64mm tall
        • furling swivel 64mm tall
      • Shrouds
        • 3mm
        • 2 upper
        • 2 lower
    • Boom
      • Black band
        • 25mm wide
        • <= 2591mm from mast
    • Spreaders
    • Black bands
      • 25mm wide
      • <= 6248mm apart
  • Pole
    • 1219mm extended

  • 4.0 Mast The mast shall conform to the building specifications and be supplied by the copyright holder. The mast shall not be altered in any way and shall be replaced only by the copyright holder.
      • 4.0.1 The mast standing rigging shall only consist of two upper shrouds and two lower shrouds. The standing rigging shall only be of stainless steel multi-strand wire and shall not be less than 3 mm in diameter. The forestay pennant shall conform to building specifications and be supplied by the copyright holder.
      • 4.0.2 The forestay shall be non-adjustable. The furling drum shall have a distance of 64 mm from the centerline of the bottom pin to the centerline of the top pin. The furling swivel shall have a distance of 64 mm from the centerline of the bottom pin to the centerline of the top pin.
      • 4.0.3 Standing rigging attachment points on the mast and deck shall not be altered or relocated.
      • 4.0.4 Black band shall be a minimum weight of 25 mm and shall encircle the mast. The distance from the upper edge of the lower band (at standard boom height) to the lower edge of the upper band shall not exceed 6248 mm.
    • 4.1 Spreaders The standard spreader bracket shall not be modified by alteration of the spreader sweep angle.
      • 4.1.2 The length of the axis of the spreader from the bearing point of the upper shroud to the surface of the mast shall be 700 mm + or - 5 mm.
      • 4.1.3 The spreaders shall be fixed on the upper shrouds so that they will be perpendicular to the mast.
    • 4.2 Boom The boom shall conform to building specifications and be supplied by the copyright holder. The boom shall not be altered in any way and shall be replaced only by the copyright holder.
      • 4.2.1 A black band of a minimum weight of 25 mm shall encircle the boom. the forward edge of the band shall not exceed 2591 mm from the aft surface of the mast when the boom is held perpendicular to the mast and on the centerline of the boat.
    • 4.3 Bow Sprit The distance from the intersection of the forward surface hull with the axis of the bow sprit to the forward surface of the bow sprit shall not exceed 1219 mm. The bow sprit shall be retracted so that it is at least even with the most forward part of the hull when the asymmetrical spinnaker is not flying.
Comments