Introducing The Jenrey CJ1 Keg Filler

 The Jenrey CJ1 machine is designed and priced to bridge the gap between manual filling and a fully automatic machine and can be used to fill Steel Kegs or PET Plastic, One Way Kegs.!

Rated to fill:  (Petainer & Steel Kegs)

·       20L (1/6 brl.) kegs at over 30 kegs per hour, and;

·       30L (1/4 brl.) kegs at over 25 kegs an hour

The Jenrey CJ1 will give you repeatable gas purging and filling volumes with a steady supply pressure within 0.1L (3.5 fluid oz.), while maintaining the back pressure you require.

The Jenrey CJ1 is PLC controlled and has a small HMI screen which allows you to set the parameters you require to fill the keg, such as fill volume and Gas purge times. The screen also allows you to select CIP, Product forward and Filling.

All the operator needs to do is couple the keg with the supplied modified coupler and press start.
The keg is then automatically de-pressurized, purged with gas and then pressurized and filled.

After being prompted by the display the Operator raises the handle on the coupler and presses the start push button again and the short hose between the automatic product valve and the coupler is purged with gas. (Note: This step can be bypassed if required.)


The Jenrey CJ1 will require the following services:

        ·       Product at 15 to 30 PSI

 ·       Purge Gas at 25 to 35 PSI

·       Air at 70 to 100 PSI

·       Electric at 115V - 220V AC