The powerful Slide Sledge® Heavy Equipment™ Hammer reduces dangerous, time consuming hammer and chisel jobs to a one-man, one-tool operation. The linear motion of Slide Sledge® focuses power for precision impact to drive pins and make other tough maintenance jobs easier, faster and a whole lot safer. Reduce downtime and increase your profits.
________________________Heavy Equipment Hammer Tools_______________________
| 9lb/30” Heavy Equipment
Compact
30” length great for fitting into tight areas
|
|
13lb/46” Heavy Equipment
Ideal
for most standard application | 
|
14lb/30” Heavy Equipment BMF
Larger
diamter BMF series coupled with compact 30” length allow tool to fit into
tight areas while delivering biggest maximum force
|
|
21lb/46” Heavy Equipment BMF
Longer
Length and greater weight delivers Biggest maximum force for your toughest
applications
|
____________________________TIPS & ACCESSORIES___________________________
|
|
1/2” Diameter Pin Driver
Recommended for pins and bolts greater than 1/2” up to 7/8” in diameter
|
|
7/8” Diameter Pin Driver
Recommended for pins greater than 7/8” up to 2” in diameter
|
|
|
1-1/4” Diameter Pin Driver
Recommended for pins greater than 1-1/4” up to 2” in diameter
|
|
2” Diameter Pin Driver
Recommended for pins greater than 2” up to 2.5” in diameter
|
|
|
2-1/2” Diameter Pin Driver
Recommended for pins greater than 2.5” up to 3” in diameter
|
|
3” Diameter Pin Driver
Recommended for pins greater than 3” up to 4” in diameter
|
|
|
Curved Chisel Tip
1-3/8” tip ideal for chopping away hardened debris and shearing metal bolts and rivets up to 3/8” grade 8
|
|
Scarifier Tooth Tip
Removes scarifier teeth on most motor graders. The fork design allows the tech to split the trenching arm where the scarifier tooth is force fit
|
|
|
Utility Wedge Tip
All purpose impact tool designed to separate parts and straighten steel with maximum force
|
|
Tie Rod/Ball Joint Separator Adapter
Attach all Slide Sledge separator forks and most common forks available
|
|
|
Race/Bearing/Seal Adapter
Install races, bearings and seals with this adapter driver tip. Add drive plates to the end of the adapter in various combinations. Fits plates with a common 9/16” center hole, up to 3/4” high.
|
|
Bushing Driver Adapter
Proper installation of bushings will be accomplishes easily and quickly with this adapter driver tip. Fits drivers with a common 3/4” center hole, up to 7/8” high.
|
|
|
Large Tire Bead Breaker
|
|
Small Tire Bead Breaker
|
|
|
Tie Rod/Ball Joint Separator 3 Tip Set
Slide Sledge separator adapter and 11/16”, 15/16” and 1-1/8” forks
|
|
5lb Handle Weight
Increases the Slide Sledge striking force by 5 lbs, work with any of the four tools by threading onto tool handle
|
|
|
Tie Rod/Ball Joint
Comes in 4 sizes : 11/16”, 15/16” 1-1/8” and 1-7/16”
|
|
|
|
|
Ripper Tooth Pin Removers
3/8” Diameter
Use on pins as small as 3/8” and up to 1/2” with minimum tooth spacing of 2-3/4”
1/2” Diameter
Use on pins as small as 1/2” and up to 3/4” with minimum tooth spacing of 3-1/2”
3/4” Diameter
Use on pins as small as 3/4” and up to 1” with minimum tooth spacing of 4-1/2”
|
|
Ripper Tooth Pin Inserters
3/8” Diameter
Use on pins as small as 3/8” and up to 1/2” with minimum tooth spacing of 2-3/4”
1/2” Diameter
Use on pins as small as 1/2” and up to 3/4” with minimum tooth spacing of 3-1/2”
3/4” Diameter
Use on pins as small as 3/4” and up to 1” with minimum tooth spacing of 4-1/2”
|
__________________________________KITS__________________________________
|
|
9lb/30” Heavy Equipment + Pin Driver
-
9lb/30” Slide Sledge Heavy Equipment hammer
-
Pin Driver, 2” Diameter
|
|
9lb/30” Heavy Equipment + 6 Pin Drivers
-
9lb/30” Slide Sledge Heavy Equipment
Hammer
-
Pin Driver, 1/2” Diameter
-
Pin Driver, 7/8” Diameter
-
Pin Driver, 1-1/4” Diameter
-
Pin Driver, 2” Diameter
- Pin Driver, 2-1/2” Diameter
-
Pin Driver, 3” Diameter
|
|
|
13lb/46” Heavy Equipment + 2” Pin Driver
-
13lb/46” Slide Sledge Heavy Equipment Hammer
- Pin Driver, 2” Diameter
|
|
13lb/46” Heavy Equipment + 6 Pin Drivers
-
13lb/46” Slide Sledge Heavy Equipment
Hammer
-
Pin Driver, 1/2” Diameter
-
Pin Driver, 7/8” Diameter
-
Pin Driver, 1-1/4” Diameter
-
Pin Driver, 2” Diameter
-
Pin Driver, 2-1/2” Diameter
-
Pin Driver, 3” Diameter
|
|
|
14lb/30” Heavy Equipment + 2” Pin Driver
-
14lb/30” Slide Sledge Heavy Equipment Hammer
-
Pin Driver, 2” Diameter
|
|
14lb/30” Heavy Equipment + 6 Pin Drivers
-
14lb/30” Slide Sledge Heavy Equipment
Hammer
-
Pin Driver, 1/2” Diameter
-
Pin Driver, 7/8” Diameter
-
Pin Driver, 1-1/4” Diameter
-
Pin Driver, 2” Diameter
-
Pin Driver, 2-1/2” Diameter
-
Pin Driver, 3” Diameter
|
|
|
21lb/46” Heavy Equipment + 2” Pin Driver
-
21lb/46” Slide Sledge Heavy Equipment Hammer
-
Pin Driver, 2” Diameter
|
|
21lb/46” Heavy Equipment + 6 Pin Drivers
-
21lb/46” Slide Sledge Heavy Equipment
Hammer
-
Pin Driver, 1/2” Diameter
-
Pin Driver, 7/8” Diameter
-
Pin Driver, 1-1/4” Diameter
-
Pin Driver, 2” Diameter
-
Pin Driver, 2-1/2” Diameter
-
Pin Driver, 3” Diameter
|
|
|
