Linksys Extender Setup – WPS Push Button Procedure with Troubleshooting Steps

There are millions of happy users of Linksys Extenders worldwide. This extender boosts up the user's experience by increasing the internet speed and network. Moreover, it facilitates extending the wireless router range even in the dead signal or low network zones.


Furthermore, the Linksys Extender Setup is an easy task that you can conveniently carry out sitting at home.

Here, we provide the guidelines about how to have your Linksys Extender Setup and troubleshooting of the issues you may face during the setup.

What is the WPS Push Button Procedure for Linksys Extender Setup?

Generally, the WPS push button method is also called the WiFi Protected Setup. This is the comfortable way to go for your Linksys Extender Setup. However, you will have to make sure that your router or extender has the WPS Push button available.

Hence, just to assist you with the Linksys Extender Setup using this method, we have explained the step-by-step guidelines for you.


  • First, we advise the users to check the WPS button's availability on your Linksys Extender.

  • Then, make sure that you have unpacked the Linksys Extender properly and removed all the tapes with covers.

  • After that, hold your extender and plug the same into an electric socket.

  • Further, switch on the extender and check if it is getting enough power supply.

  • Now, find or go to the WPS button on your extender and slightly press it.

  • At the same time, you will have to press the WPS button available on your router too. You will find the same at the backside of your router.

  • Later, ensure that the WPS LED light on your extender and router is blinking properly. When it blinks, that means your router and the extender are connecting correctly with each other.

  • Also, if you wish to extend the network from 2.4 GHz to 5 GHz, then you will have to push the WPS button from both the devices from the extender and the router.

  • After that, re-position your extender after disconnecting it from the wall socket. For this, take it to a new power supply at a different location.

  • During this, ensure that the new location of the extender must be halfway between the router and the dead zone area.

  • Furthermore, you have to check the WPS LED lights on the Linksys Extender Setup. Make sure that it emits the green light.

  • Remember, the extender's green light shows that you are getting excellent internet range.

  • However, if the light turns red, that means you need to put the extender closer to your router.

  • In the end, connect your system with the Linksys extended network properly.

By following or performing these steps, you have a successful and adequately functioning Linksys Extender Setup.

Linksys Extender Setup – Issues Troubleshooting Tips

Suppose you are facing an issue with the Linksys Extender Setup or with the extender's configuration. What will you do then? Will you try connecting to an expert?

There is no need for this as such. The solutions that we have provided you below will help you fix the problems.


  • First, we recommend the users verify the placement of their extender during the Linksys Extender Setup process. The users need to ensure that they have placed the extender in an optimal location, which is far away from the electrical appliances and metal objects.

  • Also, make sure that the electric socket where you have plugged-in the router is not damaged or functioning properly.

  • Remember, there must not be any short-circuit issue. In the case, any such problem occurs, then plug your extender in another working socket immediately.

  • To resolve or figure out the issues with your Linksys Extender Setup, you will have to be sure that your extender is well connected to the internet connection.

  • Also, verify if your extender or network is not connected with any neighboring WiFi connection.

  • Furthermore, check if there is the availability of a robust internet connection or not.

  • Access the latest web browser for visiting the 'extender.linksys.com' to initiate the Linksys.

  • Check if you have used the appropriate and the correct username and password while connecting your extender to the desired network.

  • Moreover, verify if the LED lights on your extender are blinking and showing green color or not. In the case of red light, attempt to reconnect the extender to your WiFi connection.

So, by implementing these tips, you can overcome the Linksys Extender Setup problems.

We believe this post provides you genuine solutions to your problems regarding the Linksys Extender Setup. Also, you are able to utilize the guidelines as best to complete the setup process using the WPS Push Button method.